Din avgränsning ger 81 träffar.
-
2017:02 Slow strain rate testing of copper in sulfide rich chloride containing deoxygenated water at 90 °C
Background Stress corrosion cracking (SCC) can occur in materials from the combined influence of tensile stress and a corrosive environment. It has previously been shown in the literature, that copper can be sensitive to SCC in the presence of sulfide containing water. Since both tensile...
Innehållstyp: Publikationer -
2021:03 Updated radiological risk assessment for the “Radon” type surface disposal facility in Chisinau, Moldova
SSM perspective Background Bilateral cooperation between Sweden and the Republic of Moldova in nuclear and radiological safety and security has been ongoing since 2010, focusing on activities aimed at strengthening the institutional capacity of the National Agency for Regulation of Nuclear and Radiological Activities in Moldova (NARNRA) as well as infrastructure development in radioactive...
Innehållstyp: Publikationer -
2021:14 Reliability, Feasibility and Significance of Measurements of Conductivity and Transmissivity of the Rock Mass for the Understanding of the Evolution of a Repository of Radioactive Waste
SSM perspective Background The conducted research was part of the international research project DECOVALEX 2019 (DEvelopment of COupled models and their VALidation against EXperiments). DECOVALEX 2019 consisted of seven different research projects called Task A to G. SSM were involved in Task G, which were composed of three different teams from Technical University of Liberec (TUL), Seoul...
Innehållstyp: Publikationer -
2022:08 Geophysical surveys on sub marine land- and rock slides and on alpine glaciers
SSM perspective Background The future climate evolution and the impact it might have on a repository for radioactive waste is important when assessing the long-term safety. In a project funded by SSM (Holmlund et al. 2016), bathymetric data from the Southern Quark area between Sweden and Åland, provided by the Swedish Maritime Administration, were analysed, as well as terrestrial data from...
Innehållstyp: Publikationer -
2012:71 Identification of Brittle Deformation Zones and Weakness Zones
In preparation for the review of Swedish Nuclear Fuel and Waste Management Company’s (SKB) license application for disposal of spent nuclear fuel, Swedish Radiation Safety Authority (SSM) is conducting studies to evaluate the performance of the multi-barrier principle on which the KBS-3 concept is based. Copper canisters containing the spent nuclear fuel are placed into granitic bedrock at...
Innehållstyp: Publikationer -
2011:09 Is Copper Immune to Corrosion When in Contact With Water and Aqueous Solutions?
The KBS-3concept implies that spent nuclear fuel is placed in copper canisters surrounded by clay and finally placed approximately 500 m down from surface into granitic bedrock, in order to isolate the spent nuclear fuel from humans and environment for very long time scales (i.e. millions of years). The concept is based on the multi-barrier principle, in this respect the barriers are the...
Innehållstyp: Publikationer -
2010:33 Lineament interpretation Short review and methodology
This report concerns a study which was initially conducted for the Swedish Nuclear Power Inspectorate (SKI), which is now merged into the Swedish Radiation Safety Authority (SSM). The conclusions and viewpoints presented in the report are those of the author and do not necessarily coincide with those of the SSM. In the characterization of a site that may have potential for hosting a...
Innehållstyp: Publikationer -
2010:31 Buffer erosion: An overview of concepts and potential safety consequences
In its safety analysis SR-Can, SKB reported preliminary results and conclusions on the mechanisms of bentonite colloid formation and stability, with a rough estimate of the consequences of loss of bentonite buffer by erosion. With the review of SR-Can the authorities (SKI and SSI) commented that erosion of the buffer had the greatest safety significance, that the understanding of the...
Innehållstyp: Publikationer -
2009:33 Workshop on spent fuel performance, radionuclide chemistry and geosphere transport parameters, Lidingö 2008: Overview and evaluation of recent SKB procedures
The safety assessment for disposal of spent nuclear fuel canister in the Swedish bedrock should thoroughly address the time period after a containment failure. Such a failure could be expected as a result of corrosion damage or mechanical failure due to rock movement. This report mainly covers some issues connected to parameters used for radionuclide transport calculations in the areas of...
Innehållstyp: Publikationer -
2010:09 Copper Thermodynamics in the Repository Environment up to 130˚C
The mechanisms of copper corrosion for a KBS-3 repository for spent nuclear fuel need to be known with a high level of confidence. This is because the overall rate of copper canister corrosion (accounting for corroding species concentrations, geochemical conditions and the mass transport through surrounding barriers) provides an essential performance indicator in safety assessment. A...
Innehållstyp: Publikationer
Gå till sida:
- Föregående sida
- Sida: 1
- Sida: 2
- …
- Sida: 4
- Sida: 5
- Sida: 6
-
7 (nuvarande sida)
- Sida: 8
- Sida: 9
- Nästa sida