Sök

Din avgränsning ger 72 träffar.

• 2017:05 Robust structural verification of pressurized nuclear components subjected to ratcheting, part two – stress-strain curves for cyclic elastoplastic analysis.

  Background Pressurized components in nuclear applications that are subjected to cyclic loading may exhibit progressive deformation, so called structural ratcheting. If the component is made out of a material that are deformation hardening, it may also exhibit material ratcheting. The combined effects of structural- and material ratcheting are not taken into account in the methods and material...

  Innehållstyp: Publikationer

• 2017:07 Dimensionering av nukleära byggnadskonstruktioner (DNB)

  Bakgrund Strålsäkerhetsmyndigheten (SSM) och de svenska tillståndshavarna har tidigare i ett samfinansierat forskningsprojekt tagit fram anvisningar för dimensionering av nukleära byggnadskonstruktioner, DNB. Rapporten som är baserad på Eurokoderna publicerades som SSM rapport 2014:06. DNB har sedan dess genomgått en generell uppdatering och publicerades...

  Innehållstyp: Publikationer

• 2017:22 Effect of weld repairs on residual stresses in nickel base dissimilar metal welds

  Background The driving force for crack growth near welds in nuclear application piping may arise from weld residual stresses. Experience from nondestructive examination show that cracks in dissimilar metal welds are often found near weld repairs. The repair welding may affect the residual stresses through e.g. increased tensile stresses and increased plastic straining on the surfaces of the...

  Innehållstyp: Publikationer

• 2017:21 Neutronfluensberäkningar för surveillance provning

  Sammanfattning Bestrålning av reaktortankens material med snabba neutroner leder till förändringar i materialets egenskaper så att det försprödas. De förändrade materialegenskaperna utgör en av de viktigaste orsakerna till att reaktortankens livslängd är begränsad. Att kunna beräkna det totala neutronflödet som reaktortanken...

  Innehållstyp: Publikationer

• 2017:20 Assessment of inertia effects on transient clad-to-coolant heat transfer and coolant flow under reactivity initiated accidents

  In this report, simple hydrodynamic models are used for studying the effects of coolant inertia on fuel-to-coolant heat transfer and coolant flow under reactivity initiated accidents in light water reactors. The objective is to assess if the inertia effects are important enough to warrant modification of QT-COOL, a coolant channel module for two-phase flow that has recently been implemented as...

  Innehållstyp: Publikationer

• 2017:16 Stress intensity factor solutions for circumferential cracks in cylindrical bars under axisymmetric loading and global bending

  Background The case of a circumferential crack in a cylindrical bar has not been available in the ProSACC code. The need for such a geometry, especially considering nonlinear axisymmetric loading and global bending, has motivated the development of new stress intensity factor solutions, also known as K-solutions. These new K-solutions will be available in ISAAC, the successor to ProSACC.

  Innehållstyp: Publikationer

• 2017:12 Computational assessment of LOCA simulation tests on high burnup fuel rods in Halden and Studsvik

  Background Loss of Coolant Accidents (LOCA) are among the most demanding accidents that can happen in a Light Water Reactor (LWR). The lack of cooling and the drop in pressure impose large stresses on the nuclear fuel which would increase the risk of fuel rod damage and the subsequent release of active material. But LOCA is also an accident that the nuclear power plant is designed to...

  Innehållstyp: Publikationer

• 2017:29 Evaluation of the simulation software CIVA for qualification purpose

  Background Modeling is an important tool within NDT, partly to develop and optimize testing technologies, but also within the Qualification Body’s activities to assess technical verifications and perform parameter studies. SSM has supported university research in the area for many years and, among other things, in the development of a software for ultrasound modeling. In addition, the...

  Innehållstyp: Publikationer

• 2017:32 COMRAD – Comprehensive investigation of the performance of computed and digital radiography

  Background Within the industry, there has long been a need to replace the traditional X-ray film and its handling. These both for economic and environmental considerations. Both computed radiography and digital radiography offer many advantages over the traditional use of x-ray with film. However, the transition from film-based radiography requires in-depth knowledge of the relationship...

  Innehållstyp: Publikationer

• 2017:36 Topical Peer Review 2017 Ageing Management Swedish National Assessment Report

  Executive summary The European Union’s Nuclear Safety Directive 2014/87/EURATOM (NSD) requires the member states to undertake topical peer reviews (TPR) every 6 years with the first starting in 2017. The member states, acting through the European Nuclear Safety Regulators Group (ENSREG), have decided that the topic for the first topical peer review is ageing management. The Swedish Radiation...

  Innehållstyp: Publikationer