Sök

Din avgränsning ger 83 träffar.

• 2010:41 Rock-block configuration in Uppland and the Ålands-hav basin, the regional surroundings of the SKB site in Forsmark, Sea and land areas, eastern Sweden

  This report concerns a study which was initially conducted for the Swedish Nuclear Power Inspectorate (SKI), which is now merged into the Swedish Radiation Safety Authority (SSM). The conclusions and viewpoints presented in the report are those of the authors and do not necessarily coincide with those of the SSM. The topography in Uppland is more broken in the sea area east and northeast of...

  Innehållstyp: Publikationer

• 2011:12 Analysis of Barrier Performance: Modelling of Copper corrosion scenarios with and without buffer erosion

  The purpose of this project was to develop a numerical modelling capacity to address the corrosion of the copper canister under gradually changing transport conditions caused by buffer erosion and removal of buffer mass. Due to the complexity of this task, such a model cannot be realistic in all respects, but the present effort should address the feasibility of solving numerical and...

  Innehållstyp: Publikationer

• 2011:11 Handling Interfaces and Time-varying Properties in Radionuclide Transport Models

  Quintessa’s QPAC code has been used to investigate the Qeq approach. The conclusions from this simulation study are the following. The basic approach to calculating Qeq values is sound, however, narrow channels could lead to the same release as larger fractures with the same pore velocity, so a channel enhancement factor of √10 should be considered. A spalling zone that increases the area of...

  Innehållstyp: Publikationer

• 2017:18 FEM analysis of the mechanical integrity for the canister intended for storage of spent nuclear fuel with regard to copper creep ductility

  Background For final storage of spent nuclear fuel it is suggested by the Swedish nuclear fuel and waste management company (SKB) to emplace the nuclear fuel into copper canisters which are surrounded by bentonite clay at approximately 500 meters’ depth into granitic rock. After emplacement of the canisters Bentonite swelling due to water saturation and hydrostatic pressure build up the...

  Innehållstyp: Publikationer

• 2017:02 Slow strain rate testing of copper in sulfide rich chloride containing deoxygenated water at 90 °C

  Background Stress corrosion cracking (SCC) can occur in materials from the combined influence of tensile stress and a corrosive environment. It has previously been shown in the literature, that copper can be sensitive to SCC in the presence of sulfide containing water. Since both tensile...

  Innehållstyp: Publikationer

• 2018:15 Review of Geochemical Data Utilisation in SR-Site Safety Assessment

  The Swedish Radiation Safety Authority (SSM) reviews and follows associated research related to the Swedish Nuclear Fuel Company’s (SKB) work with establishing a repository for spent nuclear fuel and an encapsulation facility.

  Innehållstyp: Publikationer

• 2018:08 Calculated radiological consequences of applying European clearance levels to scrap metal from the decommissioning of Swedish nuclear facilities

  Background Many practices involving radioactive substances generate materials with potential or known radioactive contamination. Clearance of materials means a decision that such materials can be released from regulatory control and used or disposed of without restrictions from a radiation protection point of view. According to regulations issued by the SSM, such decisions must be based on...

  Innehållstyp: Publikationer

• 2013:32 Upparbetning av utbränt kärnbränsle - En studie med fokus på exportkontroll

  Rapporten beskriver principerna för upparbetning samt egenskaperna hos utbränt kärnbränsle där sammansättningen hos det i reaktorn bildade plutoniumet är av avgörande betydelse för kärnvapenframställning till skillnad från civil upparbetning. Rapporten går igenom ett antal upparbetningsmetoder, både äldre metoder samt nya,...

  Innehållstyp: Publikationer

• 2010:39 Beskrivning av Eurokoder för betongkonstruktioner

  Eurokoder, som är gemensamma europeiska standarder för utformning och dimensionering av bärande konstruktioner till byggnader och anläggningar, utarbetas av den Europeiska Standardiseringskommittén (CEN) och ges i Sverige ut av det svenska institutet för standarder (SIS). Sverige, liksom de andra CEN-medlemsländerna, är i färd med att ersätta sina...

  Innehållstyp: Publikationer

• 2021:03 Updated radiological risk assessment for the “Radon” type surface disposal facility in Chisinau, Moldova

  SSM perspective Background Bilateral cooperation between Sweden and the Republic of Moldova in nuclear and radiological safety and security has been ongoing since 2010, focusing on activities aimed at strengthening the institutional capacity of the National Agency for Regulation of Nuclear and Radiological Activities in Moldova (NARNRA) as well as infrastructure development in radioactive...

  Innehållstyp: Publikationer