Sök

Din avgränsning ger 168 träffar.

• 2016:30 Measurement of Parameter Values for Predicting Corrosion Phenomena on Copper in Swedish HLNW Repositories

  Passivity breakdown and pitting on pure copper, the assumed material for the canisters for the isolation of high-level nuclear waste in Sweden, has been studied in simulated, sulphide- and chloride containing granitic rock groundwater and the data are interpreted in terms of the Point Defect Model (PDM). The results indicated that a sulphide barrier layer forms on the copper surface, and that...

  Innehållstyp: Publikationer

• 2016:08 SSM’s external experts’ reviews of SKB’s safety assessment SR-PSU – hydrogeological and chemical aspects

  Initial review phase...

  Innehållstyp: Publikationer

• 2015:52 Technical Note, Review of SKB’s creep model, its implementation into ABAQUS and an evaluation of SKB’s analyses of theevaluation of SKB’s analyses of the copper canister

  Bakgrund Strålsäkerhetsmyndigheten (SSM) granskar Svensk Kärnbränslehantering AB:s (SKB) ansökningar enligt lagen (1984:3) om kärnteknisk verksamhet om uppförande, innehav och drift av ett slutförvar för använt kärnbränsle och av en inkapslingsanläggning. Som en del i granskningen ger SSM konsulter uppdrag för att inhämta...

  Innehållstyp: Publikationer

• 2015:49 Technical Note, Independent Modelling of Engineered Barrier Evolution and Coupled THMC: Canister Corrosion Calculations in SR-Site

  Projektets syfte Projektet syftar till att granska olika beräkningsfall för korrosion av kopparkapseln som rapporterats i SKB TR-10-66 och som sammanfattas i SKB TR-11-01. Arbetet omfattar en analys av beräkningsfall relaterade till korrosionshastigheten för intakt buffert, delvis eroderad buffert och för advektiva förhållanden i bufferten. Målsättningen...

  Innehållstyp: Publikationer

• 2015:47 GEMA-Site 1: Model description and example application

  Background In 2011 the Swedish Nuclear Fuel and Waste Management Company (SKB) submitted an assessment of the long-term safety of a KBS-3 geological disposal facility for spent nuclear fuel in Forsmark, Sweden. This assessment, the SR-Site project, supports the licence application of SKB to build such a final disposal facility. The biosphere dose assessment carried out as part of SR-Site...

  Innehållstyp: Publikationer

• 2017:18 FEM analysis of the mechanical integrity for the canister intended for storage of spent nuclear fuel with regard to copper creep ductility

  Background For final storage of spent nuclear fuel it is suggested by the Swedish nuclear fuel and waste management company (SKB) to emplace the nuclear fuel into copper canisters which are surrounded by bentonite clay at approximately 500 meters’ depth into granitic rock. After emplacement of the canisters Bentonite swelling due to water saturation and hydrostatic pressure build up the...

  Innehållstyp: Publikationer

• 2017:02 Slow strain rate testing of copper in sulfide rich chloride containing deoxygenated water at 90 °C

  Background Stress corrosion cracking (SCC) can occur in materials from the combined influence of tensile stress and a corrosive environment. It has previously been shown in the literature, that copper can be sensitive to SCC in the presence of sulfide containing water. Since both tensile...

  Innehållstyp: Publikationer

• 2014:54 Technical Note, Further Modelling Comparison of Simple Reference Biosphere Models with the LDF Modelling Approach – Main Review Phase

  This Technical Note describes further use of simple reference biosphere models for SSM’s review of the Landscape Dose Factor (LDF) approach adopted by SKB in the SR‑Site safety assessment for the proposed final disposal of spent nuclear fuel at the Forsmark site. Simple biosphere models for the Forsmark site under temperate climate conditions were previously developed for SSM’s review and are...

  Innehållstyp: Publikationer

• 2014:58 Technical Note, Rock Mechanics - Assessing probability and extent of blind faults and fault-end growth around the KBS-3 repository at Forsmark – Main Review Phase

  To get a general understanding of the stability conditions of the fault and deformation zone inventory at Forsmark a reactivation potential analysis was carried out. At present-day stress conditions the deformation zones are stable and show no large deformations or detected seismicity. Any changes in stress, and in particular increase of differential stress on deformation zones, might cause...

  Innehållstyp: Publikationer

• 2014:47 Technical Note, Assessment of groundwater salinity evolution at repository depth and especially the impact of dilute water infiltration

  Groundwater compositions entering deposition holes in the repository will be progressively diluted over time because of expected changes of topographic and climatic conditions at Forsmark. This is a long-term safety issue because very dilute water could destabilise compacted bentonite and erode buffer, leading to advective movement of sulphide-containing water to the canister surface. SKB’s...

  Innehållstyp: Publikationer