Din avgränsning ger 2124 träffar.
-
01:35 Examination of Stress Corrosion Crack Tip Microstructures in Stainless Steel
4/960399;96082). Following this SKI commissioned AEA Technology to perform metallographic and analytical work on one of the specimens exposed in the experimental programme (14.4/960399;97129). The results of those ... hypothesis proposed by Hermansson. This work was presented at the Environmental Degradation conference held on Amelia Island in 1997, and also included in an SKI report (97:35). Sulphate entering the crack environment...
Innehållstyp: Dokument -
1996:08 Contamination and Radiation Exposure, Evaluation and Measures in the Nordic Countries after the Chernobyl Accident
a time period of 5 - 10 years after the accident 1986. There is information given and discussions on the emergency system at that time, the depo- sition in the Nordic countries, the dispersion in the ... early 60's. The two depositions were of the same order of magnitude e.g in Sweden 4.25 PBq of Cs-137 from Chernoby1 and 1.25 PBq from the atmospheric tests. However the fallout during the 60's-was rather...
Innehållstyp: Dokument -
00:11 Ph 2 Final Report. IAEA Safeguards: Implementation Blueprint of Commercial Satellite Imagery
Image Analysis and Interpretation..................................................................29 Field Inspection and Interpretation.................................................................29 Data ... - constitutes the second report from SSC Satellitbild giving a structured view and solid guidelines on how to proceed with a conceivable implementation of satellite imagery to support Safeguards activities...
Innehållstyp: Dokument -
2008:05 ULiAS 4 – Experimental validation of asoftware that models ultrasonic wavepropagation through an anisotropic weld
Properties in austenitic welds, ULAS Task 2 – Final Report, Force Institute, May 26, 2000. [6] P. Krarup, S Halkjaer. Ultrasonic Parameters in Austenitic Weldings, ULIAS Task 2 – Progress report 1. FORCE Institute ... Parameters in Austenitic Weldings, ULIAS Task 2 – Progress report 2. FORCE Institute, September 1999 [8] S Halkjaer. Ultrasonic Parameters in Austenitic Weldings, ULIAS Task 2 – Progress report 3. FORCE Institute...
Innehållstyp: Dokument -
Hantering av IAEA-krav i Clink F-PSAR.pdf
754 kB ... kapitel 3. I rapporten redovisas generellt sett endast de paragrafer som är formulerade som krav (d v s, som innehåller formuleringar som ”shall” eller liknande). Tabeller, figurer och fotnoter som ingår ... omfattar PD F re nd er in g: D ok um en tID 1 41 96 45 , V er sio n 1. 0, S ta tu s G od kä nt , S ek re te ss kla ss Ö pp en 1419645 - Projekt Clink - Anläggningskonfigurationsfas...
Innehållstyp: Dokument -
2008:11 Discrete-Feature Modelling of Groundwater Flow and Solute Transport for SR-Can Review
nuclear fuel in Sweden 2010. In support of this application SKB will present a safety report, SR-Site, on the repository’s long-term safety and radiological consequences. As a preparation for SR-Site, SKB ... work. An important objective of the authorities’ review of SR-Can is to provide guidance to SKB on the complete safety reporting for the license application. The authorities have engaged external experts...
Innehållstyp: Dokument -
Rapport om stärkt stöd och samarbete med Ukraina inom strålsäkerhetsområdet.PDF
ete 1 Inledning Med anledning av Rysslands invasion av Ukraina fick Strålsäkerhetsmyndigheten (SSM) i uppdrag av regeringen (M2022/01599) att redovisa hur stödet till och samarbetet med Ukraina inom ... senast den 28 februari 2024. 2 Bakgrund om SSM:s projektverksamhet i Ukraina Sverige har genom SSM bedrivit utvecklingssamarbete inom strålsäkerhetsområdet i Ukraina sedan 2005. Det har kunnat ske...
Innehållstyp: Dokument -
01:47 Operational Readiness Verification, Phase 1
Identification Of Human Originated Test And Maintenance Errors ............................ 7 3.3 Studies on Human Errors Related To NPP Maintenance Activities ............................ 7 3.4 Maintenance Errors ... .................................................. 41 13.4 Technical Solutions: Complex Influences on operators’ work .................................. 42 13.5 Quality of Testing.....................
Innehållstyp: Dokument -
2020:12 Assessment of the QT-COOL coolant channel module against the PBF RIA 1-2 experiment
Technologies AB, Uppsala Report number: 2020:12 ISSN: 2000-0456 Available at: www.ssm.se SSM 2020:12 SSM perspective Background The fuel rod analysis program SCANAIR has been developed by IRSN ... Swedish Radiation Safety Authority (SSM) has access to SCANAIR in exchange for annual contributions for its further development. This ensures a possibility for SSM to do own analysis of fuel rods in reactivity...
Innehållstyp: Dokument -
2005:55 Application of Master Curve Methodology for Structural Integrity Assessments of Nuclear Components
methodology and also based on this method develop a procedure for fracture assessments of nuclear components. The results of this study will be used for the SKI´s position on whether the Master curve ... components. Within the scope of this work, the theoretical background of the methodology and its validation on small and large specimens has been studied and presented to a sufficiently large extent, as well as...
Innehållstyp: Dokument