Din avgränsning ger 1311 träffar.
-
2004:02 Strengthening the Radiation Protection System in Cuba (SRPS – Cuba)
This project results from the co-operation between a number of Cuban and Swedish institutions. It started in February 2001 and ended in June 2003 and was made possible thanks to the contributions of the Swedish International Development Co-operation Agency (SIDA), the Centro de Protección e Higiene de las Radiaciones, Cuba (CPHR), and the Swedish Radiation Protection Authority (SSI). The...
Innehållstyp: Publikationer -
2001:22 Work in Support of Biosphere Assessments for Solid Radioactive Waste Disposal. 2. Biosphere FEP List and Biosphere Modelling
In order to assist SSI in its reappraisal of the SFR safety case, QuantiSci has been appointed to develop a systematic framework within which to conduct the review of SKB’s post-closure performance assessment (PA). The biosphere FEP list presented here was developed for use as reference material in conducting the review. SSI wishes to develop an independent PA capability for a time-dependent...
Innehållstyp: Publikationer -
2003:22 Kartläggning av radioaktivt avfall från icke kärnteknisk verksamhet (IKA)
På SSI:s initiativ beslutade regeringen den 23 maj 2002 om Utredningen om radioaktivt avfall från icke kärnteknisk verksamhet (M 2002:03). Utredningen ska utreda och föreslå ett system för omhändertagande och slutförvaring av radioaktivt avfall från icke kärnteknisk verksamhet. Utredaren ska vidare lämna förslag till hur finansiering...
Innehållstyp: Publikationer -
2003:21 (SKI 2003:37) SSI:s och SKI:s granskning av SKB:s uppdaterade Slutlig Säkerhetsrapport för SFR 1. Granskningsrapport
SKI,SSI Svenska...
Innehållstyp: Publikationer -
2022:16 Recent Research on EMF and Health Risk
Sixteenth report from SSM’s Scientific Council on Electromagnetic Fields, 2021...
Innehållstyp: Publikationer -
2022:10 Internal dosimetry of radionuclides that can be released during an accident at the European Spallation Source (ESS)
Läs mer SSM perspective Background To strengthen the material science research in Europe, the European Spallation Source (ESS) is being built in Lund in the southern part of Sweden. In the spallation process, neutrons are generated when the accelerated protons hit the tungsten target. In addition, a broad range of radioactive by-products is produced that differs from the fission products...
Innehållstyp: Publikationer -
2023:11 Study of degradation of spent fuel’s structural material and core components under long-term wet storage
SSM perspective Background Sweden is managing the spent nuclear fuel and core components from its commercial nuclear reactors with a national strategic plan. The fuel and core components are initially stored at the reactor site. After an on-site storage period to comply with transportation limits on decay heat and radiation, these materials are shipped to the Clab (Central Interim Storage...
Innehållstyp: Publikationer -
2023:06 Instabila matrisdefekter i bestrålat reaktortankstål med höga nickel- och manganhalter
Strålsäkerhetsmyndighetens perspektiv Bakgrund Reaktortankstål påverkas av neutronbestrålning så att omslagstemperaturen, omslag från sprött till segt brott, ökar och att segheten i det sega området minskar med ökad grad av bestrålning. För att kunna prediktera framtida försprödningsgrader har så kallade trendkurvor...
Innehållstyp: Publikationer -
2022:09 Assessment of modelling approaches for axial gas flow inside LWR fuel rods
SSM perspective Background The fuel rod analysis program SCANAIR has been developed by IRSN (Institut de Radioprotection et de Sûreté Nucléaire) for analysis of reactivity initiated accidents (RIA) in light water reactors. The Swedish Radiation Safety Authority (SSM) has access to SCANAIR in exchange for annual contributions for its further development. The development...
Innehållstyp: Publikationer -
2018:20 Metodik för analys av skador i mekaniska anordningar i kärntekniska anläggningar
Sammanfattning Föreliggande utredning behandlar skador i kärntekniska anläggningar och hur man lämpligen bör analysera uppkomna skador. Dessutom behandlas vissa åldringsmekanismer och dess påverkan på materialegenskaper. Underlag för de bedömningar och rekommendationer som görs i utredningen kommer till största delen från forskningsprojekt.
Innehållstyp: Publikationer