Visar 3230 sökträffar på ”SSM’s Scientific Council on Electromagnetic Fields”
-
2001:33 Sweden and the Bomb. The Swedish Plans to Acquire Nuclear Weapons, 19451972
ratification is going on with the intention that the protocol should be implemented simultaneously in all member states. In ratifying the agreement in May 2000, Sweden changed its Act on Nuclear Activities ... this area up until today. Dr Jonter has previously done similar work for SKI and this report is based on archives that are no longer classified. Since Sweden had plans in the nuclear weapons area it is important...
Innehållstyp: Dokument -
2008:16 Review of SKB:s Safety Assessment SR-Can: Contributions in Support of SKI:s and SSI:s Review by External Consultants
presented in this report is part of the Swedish Nuclear Power Inspectorate’s (SKI) and the Swedish Radiation Protection Authority’s (SSI) SR-Can review project. The Swedish Nuclear Fuel and Waste Management ... in Sweden 2010. In support of this application SKB will present a safety report, SR-Site, on the repository’s long-term safety and radiological consequences. As a preparation for SR-Site, SKB published...
Innehållstyp: Publikationer -
2014:29 Technical Note, Independent Modelling of Radionuclide Transport, Evaluation of Colloid Transport Modelling – Main Review Phase
Review Phase Authors: Osvaldo Pensado Sitakanta Mohanty Budhi Sagar SSM perspektiv Bakgrund Strålsäkerhetsmyndigheten (SSM) granskar Svensk Kärnbränslehantering AB:s (SKB) ansökningar enligt lagen ... slutförvar för använt kärn- bränsle och av en inkapslingsanläggning. Som en del i granskningen ger SSM konsulter uppdrag för att inhämta information och göra expertbe- dömningar i avgränsade frågor. I SSM:s...
Innehållstyp: Dokument -
2015:37 Models for axial relocation of fragmented and pulverized fuel pellets in distending fuel rods and its effects on fuel rod heat load
pellets in distending fuel rods and its effects on fuel rod heat load 2015:37 Author: Lars Olof Jernkvist Ali Massih SSM 2015:37 SSM 2015:37 SSM perspective Background At high burnups the components ... how the temperature and oxidation at the hot spot is affected and the time to burst is reduced. SSM 2015:37 Need for further research Continued improvement of calculation tools are needed to accurately...
Innehållstyp: Dokument -
2012:44 Technical Note, Review of Matrix Diffusion and related properties of intact rock in SKB’s Licence Application for a Spent Nuclear Fuel Repository in Forsmark, Sweden
This report summarizes a review of SKB’s theoretical development of matrix diffusion, its associated processes and parameters, and the data supporting calculations of matrix diffusion. In addition to diffusion ... have been some of the most important in the field. Consequently, the process is well understood both theoretically and practically. As a result of extensive field and laboratory testing, the average value...
Innehållstyp: Publikationer -
2012:56 Technical Note, Biosphere Dose Assessment: Review of Dose Consequence of Radionuclides in the Uranium-238 Series Decay Chain
Uranium-238 Series Decay Chain Authors: Roland Benke Patrick LaPlante SSM perspektiv Bakgrund Strålsäkerhetsmyndigheten (SSM) granskar Svensk Kärnbränslehantering AB:s (SKB) ansökningar enligt lagen ... slutförvar för använt kärnbränsle och av en inkapslingsanläggning. Som en del i granskningen ger SSM konsulter uppdrag för att inhämta information i avgränsade frågor. I SSM:s Technical note-serie rapporteras...
Innehållstyp: Dokument -
2014:46 Technical Note, QA in SKB’s Groundwater Flow Modelling
provide review comments on SKB’s postclosure safety analysis, SR-Site, for the proposed repository at Forsmark. The specific objective is to get an understanding and an assessment of SKB’s quality assurance ... connection to SR-Site. The reliability of the results of the groundwater flow modelling depends inter alia on the quality assurance, in particular in such a complex modelling work that SKB has performed in connection...
Innehållstyp: Publikationer -
2009:15 Improvement and Validation of Weld Residual Stress Modelling Procedure
Weld residual stresses have a large influence on the behavior of cracks growing under normal operation loads and on the leakage-flow from a through-wall crack. Accurate prediction of these events is important ... research results in the field of WRS. The major changes applied in the new weld residual stress modelling procedure are: Improved procedure for heat source calibration based on use of analytical solutions...
Innehållstyp: Publikationer -
2023:13 TPR 2023 Fire Protection Swedish National Assessment Report
Executive Summary The European Union’s Nuclear Safety Directive 2014/87/EURATOM (NSD) requires the member states to undertake topical peer reviews (TPR) every 6 years. The first topical peer review concerned ... examine how well Fire safety Programmes in participating countries meet international requirements on fire safety (in particular WENRA Safety Reference Levels – (SRLs) and the IAEA Safety Standards ).
Innehållstyp: Publikationer -
2005:33 Groundwater Flow and Radionuclide Transport in Fault Zones in Granitic Rock, Chapters 1-2
directly from a detailed fracture map from a site in southern Sweden, and a synthetic geometry based on statistics of maps. For both cases, diffusion into stagnant branches increases retardation of solute ... combined with matrix diffusion. This surprising result is interpreted as due to the interaction of flow-field heterogeneity and through-diffusion across fracture blocks. Where through- diffusion occurs, in some...
Innehållstyp: Dokument