Sök

Visar 3268 sökträffar på ”SSM’s Scientific Council on Electromagnetic Fields”

Sortera på:

Relevans Datum
  • 2004:02 Strengthening the Radiation Protection System in Cuba (SRPS – Cuba)

    reduction of risks to man and the envi- ronment from exposures to ionizing radiation. The project focused on four priority areas: 1) Protection of workers and patients exposed to radiation in radiation practi- ... reduction of risks to man and the environment from expo- sures to ionizing radiation. The project focused on four priority areas, with case studies underpinning each theme. 1. Protection of workers and patients...

    Innehållstyp: Dokument
  • 2008:17 Review of SR-Can: Evaluation of SKB’s handling of spent fuel performance, radionuclide chemistry and geosphere transport parameters

    support of SKI’s and SSI’s review of SR-Can. The work presented in this report is part of the Swedish Nuclear Power Inspectorate’s (SKI) and the Swedish Radiation Protection Authority’s (SSI) SR-Can review ... in Sweden 2010. In support of this application SKB will present a safety report, SR-Site, on the repository’s longterm safety and radiological consequences. As a preparation for SR-Site, SKB published...

    Innehållstyp: Publikationer
  • 2012:35 Technical Note, Review of SKB’s Code Documentation and QA for the SR-Site Safety Assessment

    processes applied to those codes. The review to determine whether SKB’s code documentation and quality assurance is adequate focused on SKB’s model summary report (MSR) and other documents that are identified ... which if followed would assure that they perform properly. Robert D. Brient and Thomas R. Trbovich SSM English This initial review examined the Swedish Nuclear Fuel and Waste Management Company (SKB) code...

    Innehållstyp: Publikationer
  • 2014:39 Technical Note, “Wormhole” and Multiple Loss of Buffer Safety Function Scenarios

    safety functions. The “wormhole” scenario was hypothesized during the SSM Workshop on “What-if” Canister Corrosion and was based on FEP BU07 “piping and erosion of the bentonite buffer” scenario. The subsequent ... subsequent analysis found that the penetration time of the copper canister based on hypothetical size and location of the pipe is shorter than previously predicted. Note that the corrosion analysis was...

    Innehållstyp: Publikationer
  • 2014:01 Cost Estimating for Decommissioning Nuclear Reactors in Sweden

    formally submitted to the Swedish Radiation Safety Authority (SSM), which reviews the estimates and then makes recommendations to the government on the appropriate level of fees required. In recent years, there ... shift by licensees away from generic decommissioning cost estimates for nuclear power reactors based on reference facilities and inventories, to site specific cost estimates. Site specific decommissioning...

    Innehållstyp: Publikationer
  • National Report Presentation – 7th CNS Review Meeting.pdf

    of the Convention on Nuclear Safety SWEDEN Country Group 2 National Report Presentation Vienna, March 31, 2017 Presentation Outline (1)  Summary of Basic Information on the National Program ... Safety Authority (SSM)  Reports to the Minister of Environment  Staff 300  Budget 500 MSEK (≈ 55 M€) 7 The Swedish Radiation Safety Authority 8 Related to operating NPP:s SSM regulatory functions...

    Innehållstyp: Dokument
  • 2011:16 Modelling of ultrasonic testing of cracks in cladding

    Anders Boström Research SSM perspective Background During the last two decades, SSM has supported research to develop a model for the non-destructive test situation based on ultrasonic techni- que. ... often equipped with a cladding material to prevent material degradation by the influence of media on the surface. This cladding material, often anisotropic, makes the ultrasonic examination more difficult...

    Innehållstyp: Dokument
  • 2009:15 Improvement and Validation of Weld Residual Stress Modelling Procedure

    Radiation Safety Authority, SSM. The conclusions and viewpoints pre- sented in the report are those of the author/authors and do not neces- sarily coincide with those of the SSM. Background Weld residual ... residual stresses have a large influence on the behavior of cracks growing under normal operation loads and on the leakage-flow from a through-wall crack. Accurate prediction of these events is important in...

    Innehållstyp: Dokument
  • 2010:08 Development of COLLAGE 3

    Radiation Safety Authority, SSM. The conclusions and viewpoints presented in the report are those of the author/authors and do not necessarily coin- cide with those of the SSM. SSM Perspective Background ... (CFRT) was last addressed by the Swedish nuclear regulators (SKI at that time, now in- tegrated into SSM) in 2001 – 2002. SKI had commissioned the Collage code with subsequent development as Collage 2. This...

    Innehållstyp: Dokument
  • Radionuclide transport report TR-14-09.pdf

    calculations for the safety assessment (2) SDM-PSU Forsmark Site description of the SFR area at Forsmark on completion of the site investigation Bilaga BAT Utbyggnad av SFR ur ett BAT-perspektiv Bilaga ... evaluation in the Main report. It is hence difficult to draw conclusions on fulfilling requirements on radiological safety solely on the results given in this report. The results are summarised and discussed...

    Innehållstyp: Dokument