Din avgränsning ger 300 träffar.
-
2007:19 An Applied Study of Implementation of the Advanced Decommissioning Costing Methodology for Intermediate Storage Facility for Spent Fuel in Studsvik, Sweden with special emphasis to the application of the Omega code
The aim of this applied study has been to describe in a systematic way an appropriate methodological sequence for cost estimation of crucial parameters in decontamination and decommission processes. The work has been limited to older nuclear installations and facilities. Furthermore, it may be envisaged that the process of estimating the parameters of decommissioning is one of the main issues...
Innehållstyp: Publikationer -
2019:15 3D Thermo-Mechanical Coupled Modelling of Thermo-Seismic Response of a Fractured Rock Mass related to the Final Disposal of Spent Nuclear Fuel and Nuclear Waste in Hard Rock
SSM perspective Background When assessing the long-term safety of a repository for spent nuclear fuel it is important to consider future earthquakes. Previous studies by Yoon et al. (2014, SSM Report 2014:59) and (2016, SSM Report 2016:23) investigated the fracture responses due to heat and earthquakes at major deformation zones using a 2D thermo-mechanical coupled model that uses a Particle...
Innehållstyp: Publikationer -
2014:52 Beständiga förändringar av säkerhetskulturen
Projektet har genomförts dels som en litteraturstudie och dels som en intervjuserie vid svenska kärnkraftverk. Litteraturstudien resulterade i en beskrivning av viktiga komponenter inom området säkerhetskultur, faktorer som anses möjliggöra eller förhindra att en god säkerhetskultur uppnås samt metoder och arbetssätt för att utveckla och förbättra...
Innehållstyp: Publikationer -
2014:28 Numerical simulation of ductile crack growth in residual stress fields
The study has shown on the capability of the cell model in capturing the effects on ductile tearing from limited pre-load levels and a residual stress field. Some of the conclusions are as follows: No distinctive influence on the material fracture toughness is observed from pre-loading (work hardening), both tensile and compressive, at room temperature of 1.5 or 3 % total strain. The cell...
Innehållstyp: Publikationer -
2015:04 DiD-PSA: Development of a Framework for Evaluation of the Defence-in-Depth with PSA
The project declares an interpretation of the definitions of Defence in Depth given by IAEA which outline a framework to meet PSA. For each level of defence and combinations of levels, methods to give estimates from a PSA perspective are presented and discussed. One important result is the discussion of the basic definitions and the basis for defence-in-depth, as defined by IAEA, leading to...
Innehållstyp: Publikationer -
2015:10 SafePhase: Safety culture challenges in design, construction, installation and commissioning phases of large nuclear power projects
Different lifecycle phases of a nuclear power plant present new human-technology- organization challenges to regulators and licensees. Organizational processes and practices that have evolved in one phase of development might be dysfunctional for the next phase, and the definition of “good safety culture” in practice might be unclear. The objective of the SafePhase study is to improve the...
Innehållstyp: Publikationer -
2015:03 Brottmekaniska K-lösningar för sprickor i massiv stång med icke-linjärt rotationssymmetriskt spänningstillstånd
Nya K-lösningar är framtagna för 0,0 ≤ a/R ≤ 1,0 och 0,0 ≤ a/b ≤ 1,0 där a är sprickdjupet, b är spricklängdsparameter och R är stångens radie. Lösningarna inkluderar utöver global membranlast och böjlast även rotationssymmetriska spänningsfält upp till och med femte ordningen. Anpassning av ett andragradspolynom utmed...
Innehållstyp: Publikationer -
2015:09 PROSIR - Probabilistic Structural Integrity of a PWR Reactor Pressure Vessel
Following an OCDE round robin proposal, 16 participants from 9 countries (USA, Japan, Korea (6 participants), Sweden, Germany, Czech Republic, Spain, EC and France (3 participants)) have been involved in a round robin study called PROSIR, Probabilistic Structural Integrity of a PWR Reactor Pressure Vessel. The PROSIR project started already in 2003 and a final draft version of the main report...
Innehållstyp: Publikationer -
2012:11 Issues in the corrosion of copper in a Swedish high level nuclear waste repository
The objective with this research project was to increase knowledge in the area of copper corrosion in the planned repository environment and obtain information on how copper corrosion evolves during the assessment period of 100 000 years. The equilibrium chemical composition of groundwater close to the canister as a function of temperature has been calculated by use of a thermodynamics code...
Innehållstyp: Publikationer -
2010:32 Fingerprints of zones in boreholes An approach to identify the characteristics of structures
This report concerns a study which was initially conducted for the Swedish Nuclear Power Inspectorate (SKI), which is now merged into the Swedish Radiation Safety Authority (SSM). The conclusions and viewpoints presented in the report are those of the authors and do not necessarily coincide with those of the SSM. The Swedish Nuclear Fuel and Waste Management Co (SKB) has published Site...
Innehållstyp: Publikationer