Din avgränsning ger 426 träffar.
-
2013:09 An Application of the Functional Resonance Analysis Method (FRAM) to Risk Assessment of Organisational Change
The objective of this study was to demonstrate an alternative approach to risk assessment of organisational changes, based on the principles of resilience engineering. The approach in question was the Functional Resonance Analysis Method (FRAM). Whereas established approaches focus on risks coming from failure or malfunctioning of components, alone or in combination, resilience engineering...
Innehållstyp: Publikationer -
2012:70 Process Parameters Affecting Inhomogeneity of Material Microstructure
There’s been a tremendous change in the number, product types, locations, equipment, and manufacturing capabilities of stainless steel producers from the late 1960’s to present. This reconfiguration of the global steel industry occurred between the early 1970’s to the mid 1980’s and continues today. These changes have produced a loss in manufacturing flexibility, due to the inherent...
Innehållstyp: Publikationer -
2013:27 Numerical simulations of headed anchors break in reinforced and non-reinforced concrete structures
The design codes for anchorage of equipment in concrete structures have been developed since the time the Swedish power plants were designed. Furthermore, the design basis has been updated and in some cases new mechanical loads have been added. As a consequence, it can be difficult for some anchorages to meet the requirements of today. In the design of anchorage equipment the beneficial effect...
Innehållstyp: Publikationer -
2014:52 Beständiga förändringar av säkerhetskulturen
Projektet har genomförts dels som en litteraturstudie och dels som en intervjuserie vid svenska kärnkraftverk. Litteraturstudien resulterade i en beskrivning av viktiga komponenter inom området säkerhetskultur, faktorer som anses möjliggöra eller förhindra att en god säkerhetskultur uppnås samt metoder och arbetssätt för att utveckla och förbättra...
Innehållstyp: Publikationer -
2014:28 Numerical simulation of ductile crack growth in residual stress fields
The study has shown on the capability of the cell model in capturing the effects on ductile tearing from limited pre-load levels and a residual stress field. Some of the conclusions are as follows: No distinctive influence on the material fracture toughness is observed from pre-loading (work hardening), both tensile and compressive, at room temperature of 1.5 or 3 % total strain. The cell...
Innehållstyp: Publikationer -
2014:18 Evaluation of the Halden IFA-650 loss-of-coolant accident experiments 2, 3 and 4
The analytical tools, which are fuel rod computer codes, that Quantum Technologies AB use and develop, contain models of several of the phenomena that are acting on the nuclear fuel (cladding temperature, fission gas driven pressure, strain and stress in the cladding, rod rupture, etc.) and how the separate effects interact in the complex integrated manner. The codes are under constant...
Innehållstyp: Publikationer -
2014:09 Further Development of the Core Simulator CORE SIM: Extension to coupled capabilities for BWRs
The developed tool is fully MatLab based and requires a set of input data from a commercial static core simulator. The driving perturbation can be specified both as a perturbation in thermo-hydraulic parameters or directly as a perturbation in macroscopic cross-sections. As output, the 3-dimensional spatial distribution of the noise in coolant density, pressure, enthalpy, inlet velocity, fuel...
Innehållstyp: Publikationer -
2006:36 Mechanical Integrity of Canisters Using a Fracture Mechanics Approach
This report presents the methods and results of a research project for Swedish Nuclear Power Inspectorate (SKI) about numerical modeling of mechanical integrity of cast-iron canisters for the final disposal of spent nuclear fuel in Sweden, using combined boundary element (BEM) and finite element (FEM) methods The objectives of the project are: 1) to investigate the possibility of initiation...
Innehållstyp: Publikationer -
2007:17 Spent Fuel Dissolution and Source Term Modelling in Safety Assessment
SKI is preparing to review the license applications being developed by the Swedish Nuclear Fuel and Waste Management Company (SKB) for a final repository for the geological disposal of spent nuclear fuel (SFL-2) in the year 2009. As part of its preparation, SKI is conducting a series of technical workshops on key aspects of the Engineered Barrier System (EBS) and spent fuel. This workshop...
Innehållstyp: Publikationer -
2018:18 Procedure for Safety Assessment of Components with Defects
– Handbook Edition 5...
Innehållstyp: Publikationer