Din avgränsning ger 427 träffar.
-
2014:18 Evaluation of the Halden IFA-650 loss-of-coolant accident experiments 2, 3 and 4
The analytical tools, which are fuel rod computer codes, that Quantum Technologies AB use and develop, contain models of several of the phenomena that are acting on the nuclear fuel (cladding temperature, fission gas driven pressure, strain and stress in the cladding, rod rupture, etc.) and how the separate effects interact in the complex integrated manner. The codes are under constant...
Innehållstyp: Publikationer -
2015:09 PROSIR - Probabilistic Structural Integrity of a PWR Reactor Pressure Vessel
Following an OCDE round robin proposal, 16 participants from 9 countries (USA, Japan, Korea (6 participants), Sweden, Germany, Czech Republic, Spain, EC and France (3 participants)) have been involved in a round robin study called PROSIR, Probabilistic Structural Integrity of a PWR Reactor Pressure Vessel. The PROSIR project started already in 2003 and a final draft version of the main report...
Innehållstyp: Publikationer -
2014:09 Further Development of the Core Simulator CORE SIM: Extension to coupled capabilities for BWRs
The developed tool is fully MatLab based and requires a set of input data from a commercial static core simulator. The driving perturbation can be specified both as a perturbation in thermo-hydraulic parameters or directly as a perturbation in macroscopic cross-sections. As output, the 3-dimensional spatial distribution of the noise in coolant density, pressure, enthalpy, inlet velocity, fuel...
Innehållstyp: Publikationer -
2011:17 Structural Health Monitoring of Piping in Nuclear Power Plants – A Review of Efficiency of Existing Methods
SSM needs to acquire knowledge about new applied Non-Destructive Engineering (NDE) techniques and their efficiency. One area that is discussed more frequently is Structural Health Monitoring (SHM). SSM needs to investigate the international experiences of SHM from the nuclear industry. SSM also wants to have more information about the capabilities and the limitations of NDE methods The first...
Innehållstyp: Publikationer -
2010:46 Development of the PRO-LOCA Probabilistic Fracture Mechanics Code, MERIT Final Report
The MERIT project has been an internationally financed program with the main purpose of developing probabilistic models for piping failure of nuclear components and to include these models in a probabilistic code named PRO-LOCA. The principal objective of the project has been to develop probabilistic models for piping failure of nuclear components and to include these models in a...
Innehållstyp: Publikationer -
2012:11 Issues in the corrosion of copper in a Swedish high level nuclear waste repository
The objective with this research project was to increase knowledge in the area of copper corrosion in the planned repository environment and obtain information on how copper corrosion evolves during the assessment period of 100 000 years. The equilibrium chemical composition of groundwater close to the canister as a function of temperature has been calculated by use of a thermodynamics code...
Innehållstyp: Publikationer -
2011:12 Analysis of Barrier Performance: Modelling of Copper corrosion scenarios with and without buffer erosion
The purpose of this project was to develop a numerical modelling capacity to address the corrosion of the copper canister under gradually changing transport conditions caused by buffer erosion and removal of buffer mass. Due to the complexity of this task, such a model cannot be realistic in all respects, but the present effort should address the feasibility of solving numerical and...
Innehållstyp: Publikationer -
2011:11 Handling Interfaces and Time-varying Properties in Radionuclide Transport Models
Quintessa’s QPAC code has been used to investigate the Qeq approach. The conclusions from this simulation study are the following. The basic approach to calculating Qeq values is sound, however, narrow channels could lead to the same release as larger fractures with the same pore velocity, so a channel enhancement factor of √10 should be considered. A spalling zone that increases the area of...
Innehållstyp: Publikationer -
2006:36 Mechanical Integrity of Canisters Using a Fracture Mechanics Approach
This report presents the methods and results of a research project for Swedish Nuclear Power Inspectorate (SKI) about numerical modeling of mechanical integrity of cast-iron canisters for the final disposal of spent nuclear fuel in Sweden, using combined boundary element (BEM) and finite element (FEM) methods The objectives of the project are: 1) to investigate the possibility of initiation...
Innehållstyp: Publikationer -
2007:17 Spent Fuel Dissolution and Source Term Modelling in Safety Assessment
SKI is preparing to review the license applications being developed by the Swedish Nuclear Fuel and Waste Management Company (SKB) for a final repository for the geological disposal of spent nuclear fuel (SFL-2) in the year 2009. As part of its preparation, SKI is conducting a series of technical workshops on key aspects of the Engineered Barrier System (EBS) and spent fuel. This workshop...
Innehållstyp: Publikationer