Din avgränsning ger 423 träffar.
-
2017:14 Kriterier för klinisk revision av strålbehandling
Bakgrund I rådets direktiv 2013/59/Euratom definieras klinisk revision som systematisk utvärdering av medicinska radiologiska förfaranden i syfte att förbättra kvaliteten och resultaten i patientvården genom strukturerad översyn, varigenom medicinska radiologiska verksamheter, förfaranden och resultat granskas mot vedertagna normer för goda medicinska...
Innehållstyp: Publikationer -
2017:13 Monte Carlo patient-specific pre-treatment QA system for volumetric modulated arc therapy
Background The clinical use of volumetric modulated arc therapy (VMAT) has augmented rapidly since it became commercially available. As a result, the need for comprehensive quality assurance (QA) has increased. Current practices in Sweden normally compare the delivered dose with the planned dose based on measurements with different methods, for instance: portal dosimetry, point dose...
Innehållstyp: Publikationer -
2011:04 Evaluation of the Technical Basis for New Proposals of Fatigue Design of Nuclear Components
During the recent years fatigue analysis procedures for nuclear components have been investigated. The most common method so far has been the American code ASME III. The basis for the current design procedures in ASME III is quite old and has now been evaluated against modern data leading to the proposal of modified design curves. Also the effect of the environment has been the subject of...
Innehållstyp: Publikationer -
2015:28 Utvärdering av materialdata för befintliga betongkonstruktioner - med inriktning på verifiering av förankringar vid kärntekniska anläggningar
Bakgrund I de Svenska kärnkraftverken finns ett stort antal fästplattor som är ingjutna alternativt eftermonterade. Fästplattan består av en förankringsplatta med tillhörande betonginfästning. Kapaciteten för flera av de viktigare brottmoderna för betonginfästningar styrs av hållfastheten hos omgivande betong. Betongens hållfasthet...
Innehållstyp: Publikationer -
2015:37 Models for axial relocation of fragmented and pulverized fuel pellets in distending fuel rods and its effects on fuel rod heat load
Haverifall med kylmedelsförlust (LOCA) i lättvattenreaktorer kan leda till överhettning av bränslestavar, utvidgning av stavarnas kapslingsrör, samt axiell omflyttning av bränslekutsfragment i de delar av stavarna som expanderat. Bränsleomflyttningen kan koncentrera värmebelastningen till en begränsad del av stavarna och därigenom öka risken...
Innehållstyp: Publikationer -
2015:24 Dimensionering av nukleära byggnadskonstruktioner (DNB)
Strålsäkerhetsmyndigheten (SSM) och de svenska tillståndshavarna har tidigare i ett samfinansierat forskningsprojekt tagit fram anvisningar för dimensionering av nukleära byggnadskonstruktioner, DNB. Rapporten som är baserad på Eurokoderna publicerades som SSM rapport 2014:06 För att ytterligare förbättra DNB och för att säkerställa...
Innehållstyp: Publikationer -
2015:25 Design Guide for Nuclear Civil Structures (DNB)
The Swedish Radiation Safety Authority (SSM) and the Swedish licensees have previously in a jointly funded research project developed a design guide for civil structures at Swedish nuclear facilities to be based on Eurocodes, DNB. The report was published in January 2014 as SSM Report 2014:06. To further improve DNB and to ensure that the fundamentals of the recommendations will be applied...
Innehållstyp: Publikationer -
2016:35 Säkerhetsvärdering mot plastisk kollaps vid skadetålighetsanalyser
Bakgrund Proceduren som används för brottmekanisk analys av defekter och inspektionsintervall för komponenter i svenska kärntekniska anläggningar utgår från den brittiska R6-metoden men är vidareutvecklad för att ha ett säkerhetsvärderingssystem som är kompatibelt med säkerhetskraven som uttrycks i den amerikanska tryckkärlsstandarden...
Innehållstyp: Publikationer -
2016:29 Evaluation of the Swedish participation in the Halden Reactor Project 2006–2014
This is a report on the evaluation of the Swedish participation in the Halden Reactor Project 2006-2014. The study has consisted in evaluating the types and extent of added value from the Swedish participation in the Halden Reactor Project, and to determine what additional added value the participation could supply for the Swedish authority. It can be concluded from the study that the impacts...
Innehållstyp: Publikationer -
2016:39 Recommended residual stress profiles for stainless steel pipe welds
Background The Swedish Radiation Safety Authority (SSM) and the Swedish nuclear power plant owners have financed Inspecta Technology in Sweden to analyze stainless steel pipe welds to obtain good estimations of weld residual stress (WRS) distributions. Detailed knowledge of the residual stress field in different types of welds is important since they can have substantial influence on...
Innehållstyp: Publikationer