Din avgränsning ger 302 träffar.
-
2014:18 Evaluation of the Halden IFA-650 loss-of-coolant accident experiments 2, 3 and 4
The analytical tools, which are fuel rod computer codes, that Quantum Technologies AB use and develop, contain models of several of the phenomena that are acting on the nuclear fuel (cladding temperature, fission gas driven pressure, strain and stress in the cladding, rod rupture, etc.) and how the separate effects interact in the complex integrated manner. The codes are under constant...
Innehållstyp: Publikationer -
2014:09 Further Development of the Core Simulator CORE SIM: Extension to coupled capabilities for BWRs
The developed tool is fully MatLab based and requires a set of input data from a commercial static core simulator. The driving perturbation can be specified both as a perturbation in thermo-hydraulic parameters or directly as a perturbation in macroscopic cross-sections. As output, the 3-dimensional spatial distribution of the noise in coolant density, pressure, enthalpy, inlet velocity, fuel...
Innehållstyp: Publikationer -
2019:15 3D Thermo-Mechanical Coupled Modelling of Thermo-Seismic Response of a Fractured Rock Mass related to the Final Disposal of Spent Nuclear Fuel and Nuclear Waste in Hard Rock
SSM perspective Background When assessing the long-term safety of a repository for spent nuclear fuel it is important to consider future earthquakes. Previous studies by Yoon et al. (2014, SSM Report 2014:59) and (2016, SSM Report 2016:23) investigated the fracture responses due to heat and earthquakes at major deformation zones using a 2D thermo-mechanical coupled model that uses a Particle...
Innehållstyp: Publikationer -
2014:52 Beständiga förändringar av säkerhetskulturen
Projektet har genomförts dels som en litteraturstudie och dels som en intervjuserie vid svenska kärnkraftverk. Litteraturstudien resulterade i en beskrivning av viktiga komponenter inom området säkerhetskultur, faktorer som anses möjliggöra eller förhindra att en god säkerhetskultur uppnås samt metoder och arbetssätt för att utveckla och förbättra...
Innehållstyp: Publikationer -
2015:04 DiD-PSA: Development of a Framework for Evaluation of the Defence-in-Depth with PSA
The project declares an interpretation of the definitions of Defence in Depth given by IAEA which outline a framework to meet PSA. For each level of defence and combinations of levels, methods to give estimates from a PSA perspective are presented and discussed. One important result is the discussion of the basic definitions and the basis for defence-in-depth, as defined by IAEA, leading to...
Innehållstyp: Publikationer -
2015:10 SafePhase: Safety culture challenges in design, construction, installation and commissioning phases of large nuclear power projects
Different lifecycle phases of a nuclear power plant present new human-technology- organization challenges to regulators and licensees. Organizational processes and practices that have evolved in one phase of development might be dysfunctional for the next phase, and the definition of “good safety culture” in practice might be unclear. The objective of the SafePhase study is to improve the...
Innehållstyp: Publikationer -
2015:03 Brottmekaniska K-lösningar för sprickor i massiv stång med icke-linjärt rotationssymmetriskt spänningstillstånd
Nya K-lösningar är framtagna för 0,0 ≤ a/R ≤ 1,0 och 0,0 ≤ a/b ≤ 1,0 där a är sprickdjupet, b är spricklängdsparameter och R är stångens radie. Lösningarna inkluderar utöver global membranlast och böjlast även rotationssymmetriska spänningsfält upp till och med femte ordningen. Anpassning av ett andragradspolynom utmed...
Innehållstyp: Publikationer -
2015:09 PROSIR - Probabilistic Structural Integrity of a PWR Reactor Pressure Vessel
Following an OCDE round robin proposal, 16 participants from 9 countries (USA, Japan, Korea (6 participants), Sweden, Germany, Czech Republic, Spain, EC and France (3 participants)) have been involved in a round robin study called PROSIR, Probabilistic Structural Integrity of a PWR Reactor Pressure Vessel. The PROSIR project started already in 2003 and a final draft version of the main report...
Innehållstyp: Publikationer -
2019:23 Participation in the European Committee for Standardization's workshop regarding civil structures
SSM perspective Background During the period 2014-2018, a CEN1 workshop (Phase 2 Prospective Group 3 civil works) have been carried out. The aim of the workshop is to provide a base founded on the French standard in order to be able to establish a possible future European standard for the design of civil structures at nuclear power plants. The workshop has identied which additional...
Innehållstyp: Publikationer -
2019:20 Assessment of structures subject to concrete pathologies (ASCET), phase 3
SSM perspective Background ASCET is an international research project initiated by WGIAGE1 OECD2 / NEA3. WGIAGE Concrete subgroup is a working group within the OECD / NEA whose task is to address issues concerning the maintenance of the integrity of concrete structures, proposals for general principles to optimally handle the challenges of integrity, especially with regard to ageing of...
Innehållstyp: Publikationer