Din avgränsning ger 565 träffar.
-
2010:22 Research and Development Program in Reactor Diagnostics and Monitoring with Neutron Noise Methods, Stage 16
This report constitutes Stage 16 of a long-term research and development program concerning the development of diagnostics and monitoring methods for nuclear reactors. Results up to Stage 15 were reported in SKI and SSM reports, as listed below and in the Summary. The results have also been published in international journals and have been included in both licentiate- and doctor’s degrees.
Innehållstyp: Publikationer -
2022:14 Weld residual stress and strain measurements on a mock-up with single layer strip cladding common in reactor pressure vessels
SSM perspektiv Bakgrund Reaktortryckkärl tillverkas vanligtvis av låglegerade ferritiska stål som på insidan beläggs med ett eller flera lager av rostfritt stål, så kallad plätering eller på engelska cladding. Den rostfria pläteringen påverkar den strukturella integriteten på flera sätt, dels har pläteringen annorlunda materialegenskaper...
Innehållstyp: Publikationer -
2021:25 Simulering av BWR normalvattenkemi
SSM perspektiv Bakgrund Primärsystemet i en kokvattenreaktor (BWR) såsom rörledningar och komponenter utgörs bland annat av rostfria stål och nickelbaslegeringar. Dessa material har påvisats att i olika grad kunna drabbas av interkristallin spänningskorrosionssprickning under de förutsättningar som råder i en BWR. Väl underbyggda samband mellan...
Innehållstyp: Publikationer -
02:4 Qualification of Electrical Components in Nuclear Power Plants. Management of Ageing
The work was finished and reported in Swedish in a limited publication 2000, Ingemansson Rapport H-14061-r-I. As the performed work was regarded to be of more general interest it is published again as a research report by the Swedish Nuclear Power Inspectorate. To be used in the international cooperation in nuclear safety it was also translated into English by the inspectorate, which is this...
Innehållstyp: Publikationer -
2005:60 Research and Service Experience with Environmentally-Assisted Cracking in Carbon and Low-Alloy Steels in High-Temperature Water
In this report, the most relevant aspects of research and service experience with environmentally assisted cracking of carbon and low-alloy steels in high-temperature water are reviewed, with special emphasis on the primary pressure-boundary components of boiling water reactors. The main factors controlling the susceptibility to environmentally assisted cracking under light water reactor...
Innehållstyp: Publikationer -
2008:17 Review of SR-Can: Evaluation of SKB’s handling of spent fuel performance, radionuclide chemistry and geosphere transport parameters
External review contribution in support of SKI’s and SSI’s review of SR-Can. The work presented in this report is part of the Swedish Nuclear Power Inspectorate’s (SKI) and the Swedish Radiation Protection Authority’s (SSI) SR-Can review project. The Swedish Nuclear Fuel and Waste Management Co (SKB) plans to submit a license application for the construction of a repository for spent nuclear...
Innehållstyp: Publikationer -
2010:18 Radionuclide Transport: Preparation During 2009 for the SR-Site Review
Post-closure safety assessments for nuclear waste repositories involve radioecological modelling for an underground source term. Following several decades of research and development, the Swedish Nuclear Waste Management Company (SKB) is approaching a phase of license application. According to SKB’s plans, an application to construct a geological repository will be submitted by the end of...
Innehållstyp: Publikationer -
2010:28 GEMA3D – landscape modelling for dose assessments
Post-closure safety assessments for nuclear waste repositories involve radioecological modelling for an underground source term. Following several decades of research and development, the Swedish Nuclear Waste Management Company (SKB) is approaching a phase of license application. According to SKB’s plans, an application to construct a geological repository will be submitted by the end of...
Innehållstyp: Publikationer -
2012:13 Technical Note, A review of the creep ductility of copper for nuclear waste canister application
SKB has presented insufficient evidence to justify their position that the OFP copper has an adequate creep ductility during long term storage. Their large body of experiments only serves to prove that the creep ductility is sufficient for much shorter time spans than the intended storage times. There is a clear need for a credible theory of creep brittleness of OFP copper which will permit...
Innehållstyp: Publikationer -
2011:21 Workshop on spent fuel performance and radionuclide chemistry -Rånäs 2010: Assessment of some outstanding issues
The safety assessment for final disposal of spent nuclear fuel has to comprehensively address the stage when containment barriers have failed and when radionuclide releases occur to the surrounding groundwater at repository depth. Essential processes for estimating risk/dose related to this scenario involve the release of radionuclide from the spent fuel surfaces due to radio-lytic oxidative...
Innehållstyp: Publikationer