Din avgränsning ger 1352 träffar.
-
01:34 Joint SKI and SSI review of SKB preliminary safety assessment of repository for long-lived low- and intermediate-level waste
Review report...
Innehållstyp: Publikationer -
01:44 Recharge-area Nuclear Waste Repository in Southeastern Sweden
Demonstration of Hydrogeologic Siting Concepts and Techniques...
Innehållstyp: Publikationer -
01:39 Utvärdering av utfrågningar
Resultat från genomlysningar av kärnavfallsfrågan i de svenska förstudiekommunerna.
Innehållstyp: Publikationer -
01:13 Genomgång av SKB:s förstudier och val av områden för platsundersökningar
Kjell Andersson, Sven Tirén SKI Svenska...
Innehållstyp: Publikationer -
2012:18 Technical Note, SR-Site Independent Modelling of Engineered Barrier Evolution and Coupled THMC: Contribution to the Initial Review Phase
This review has focussed mainly on the modelling of the Engineered Barrier System (EBS) evolution, which includes coupled thermal, hydraulic, mechanical and chemical (THMC) processes. Additionally, the role of the EBS in the wider safety case was reviewed, including its treatment in scenarios and its representation in conceptual models since this provided the motivation for the modelling work...
Innehållstyp: Publikationer -
2011:26 The influence of temperature and fluid pressure on the fracture network evolution around deposition holes of a KBS-3V concept at Forsmark, Sweden
In preparation for the review of SKB’s license application for disposal of spent nuclear fuel, SSM is conducting studies to evaluate the performance of the multi-barrier principle on which the KBS-3 concept is based. Copper canisters containing the spent nuclear fuel are placed into granitic bedrock at about 500 m depth and embedded in clay. Thus, the rock, the clay and the copper canister...
Innehållstyp: Publikationer -
2012:11 Issues in the corrosion of copper in a Swedish high level nuclear waste repository
The objective with this research project was to increase knowledge in the area of copper corrosion in the planned repository environment and obtain information on how copper corrosion evolves during the assessment period of 100 000 years. The equilibrium chemical composition of groundwater close to the canister as a function of temperature has been calculated by use of a thermodynamics code...
Innehållstyp: Publikationer -
2011:15 Beräkning av merkostnader 2011 för rivning av de svenska kärnkraftverken och omhändertagande av restprodukter
Denna rapport beskriver SSM:s beräkningar av framtida merkostnader inför avgiftsförslaget för 2012-2014. Beräkningen görs i enlighet med finansieringslagen och avser samtliga merkostnader fram till dess att restprodukterna från de svenska kärnkraftverken är slutligt förvarade. Enligt nuvarande beräkningar antas detta ske 2069. Uppskattningen...
Innehållstyp: Publikationer -
2011:12 Analysis of Barrier Performance: Modelling of Copper corrosion scenarios with and without buffer erosion
The purpose of this project was to develop a numerical modelling capacity to address the corrosion of the copper canister under gradually changing transport conditions caused by buffer erosion and removal of buffer mass. Due to the complexity of this task, such a model cannot be realistic in all respects, but the present effort should address the feasibility of solving numerical and...
Innehållstyp: Publikationer -
2011:11 Handling Interfaces and Time-varying Properties in Radionuclide Transport Models
Quintessa’s QPAC code has been used to investigate the Qeq approach. The conclusions from this simulation study are the following. The basic approach to calculating Qeq values is sound, however, narrow channels could lead to the same release as larger fractures with the same pore velocity, so a channel enhancement factor of √10 should be considered. A spalling zone that increases the area of...
Innehållstyp: Publikationer