Sök

Din avgränsning ger 64 träffar.

• 2014:10 Technical Note, Rock Mechanics - Confidence of SKB’s models for predicting the occurrence of spalling – Main Review Phase

  This review study is placed in the context of SSM’s Main Review Phase for SKB’s safety assessment SR-Site. The assignment is titled “Rock Mechanics – Confidence of SKB’s models for predicting the occurrence of spalling”. The report presents the authors’ assessment in response to the questions raised by SSM. The review concentrated on two main issues: (1) the analysis of the assumptions made...

  Innehållstyp: Publikationer

• 2014:08 Technical Note, Review of Long-Term Redox Evolution of Groundwater and Potential Influence of Oxygenated Glacial Meltwater in SR-Site

  The Swedish Radiation Safety Authority (SSM) is reviewing an application submitted by the Swedish Nuclear Fuel and Waste Management Company (SKB) in 2011 to construct, possess, and operate a deep geologic repository for spent nuclear fuel at the Forsmark site in the municipality of Östhammar, Sweden. SKB has presented details of its long-term safety assessment, SR-Site, in a main report...

  Innehållstyp: Publikationer

• 2014:49 Samhällskostnader för hudcancer 2011

  I denna rapport presenteras förekomsten av olika hudcancerdiagnoser i Sverige 2011 samt samhällskostnaderna relaterat till dessa diagnoser. Dessutom redovisas en sammanställning av genomförda hälsoekonomiska utvärderingar av preventiva insatser mot hudcancer som finns publicerat internationellt. De totala kostnaderna för hudcancer i Sverige år 2011 beräknas...

  Innehållstyp: Publikationer

• 2014:02 Värdering av strålskydd och säkerhet vid universitetssjukhusens strålbehandling

  Strålsäkerhet är ett samlingsbegrepp som för medicinska verksamheter innefattar strålskydd, säkerhet och fysiskt skydd. Strålskydd avser skydd av människa och miljö mot skadlig verkan av strålning genom att endast utföra berättigade och optimerade undersökningar och behandlingar och att använda sig av dosgränser för...

  Innehållstyp: Publikationer

• 2014:03 Report from SSM’s scientific council on ionizing radiation within oncology, 2012

  In this report, a finalized version of a radiotherapy protocol template for external beam radiotherapy is presented. The focus is on procedural aspects, while issues regarding clinical evaluation during and after treatment are not dealt with. The use of this radiotherapy template is encouraged for structured description of contemporary radiotherapy in care programs and clinical trial...

  Innehållstyp: Publikationer

• 2014:52 Beständiga förändringar av säkerhetskulturen

  Projektet har genomförts dels som en litteraturstudie och dels som en intervjuserie vid svenska kärnkraftverk. Litteraturstudien resulterade i en beskrivning av viktiga komponenter inom området säkerhetskultur, faktorer som anses möjliggöra eller förhindra att en god säkerhetskultur uppnås samt metoder och arbetssätt för att utveckla och förbättra...

  Innehållstyp: Publikationer

• 2014:28 Numerical simulation of ductile crack growth in residual stress fields

  The study has shown on the capability of the cell model in capturing the effects on ductile tearing from limited pre-load levels and a residual stress field. Some of the conclusions are as follows: No distinctive influence on the material fracture toughness is observed from pre-loading (work hardening), both tensile and compressive, at room temperature of 1.5 or 3 % total strain. The cell...

  Innehållstyp: Publikationer

• 2014:27 Regulation applying to welding of pressure equipment – a comparative study

  The PED was in force in November 1999 and has been mandatory in European Union Member States since May 2002. Most of the standards referred to in the PED are relatively new although some of the standards were adopted in the early 1990s. On the other hand, the ASME B&PV Code has been used for a long time now and is the result of several decades of industrial experiences. The authors present...

  Innehållstyp: Publikationer

• 2014:18 Evaluation of the Halden IFA-650 loss-of-coolant accident experiments 2, 3 and 4

  The analytical tools, which are fuel rod computer codes, that Quantum Technologies AB use and develop, contain models of several of the phenomena that are acting on the nuclear fuel (cladding temperature, fission gas driven pressure, strain and stress in the cladding, rod rupture, etc.) and how the separate effects interact in the complex integrated manner. The codes are under constant...

  Innehållstyp: Publikationer

• 2014:09 Further Development of the Core Simulator CORE SIM: Extension to coupled capabilities for BWRs

  The developed tool is fully MatLab based and requires a set of input data from a commercial static core simulator. The driving perturbation can be specified both as a perturbation in thermo-hydraulic parameters or directly as a perturbation in macroscopic cross-sections. As output, the 3-dimensional spatial distribution of the noise in coolant density, pressure, enthalpy, inlet velocity, fuel...

  Innehållstyp: Publikationer