Visar 4685 sökträffar på ””
-
2015:07 TEM-lamella lift-out from the crack tip region of Alloy 600 for high resolution electron microscopy examination
This report contributes to the development of a method for high-quality TEM lamella preparation from crack tip regions of nuclear materials. A standard compact tension (CT) specimen of Alloy 600 previously tested for stress corrosion crack growth in simulated PWR primary water was used to demonstrate the benefit of the proposed method. This report describes the procedure for cutting the CT...
Innehållstyp: Publikationer -
2015:43 Robust structural verification of pressurized nuclear components subjected to ratcheting
Background Pressurized components in nuclear applications that are subjected to cyclic loading may exhibit progressive deformation, so called structural ratcheting. If the component is made out of a material that are deformation hardening, it may also exhibit material ratcheting. The combined effects of structural- and material ratcheting are not taken into account in the methods and material...
Innehållstyp: Publikationer -
2014:21 Effects of additives on uranium dioxide fuel behavior
This report will form a basis for the reviews that SSM does when the license holders applies for use of nuclear fuel with additives. The report is also intended as a reference to the models that Quantum Technologies AB has developed. The report and the models will be a valuable source of information for SSM and other parties when discussing the performance of doped fuel. Ali Massih SSM...
Innehållstyp: Publikationer -
2015:46 Assessment of data and criteria for cladding burst in loss-of-coolant accidents
Ali R. Massih, Lars Olof Jernkvist SSM English...
Innehållstyp: Publikationer -
2011:20 A Guidebook for Evaluating Organizations in the Nuclear Industry – an example of safety culture evaluation
Organizations in the nuclear industry need to maintain an overview on their vulnerabilities and strengths with respect to safety. Systematic periodical self- assessments are necessary to achieve this overview. This guidebook provides suggestions and examples to assist power companies but also external evaluators and regulators in carrying out organizational evaluations. Organizational...
Innehållstyp: Publikationer -
2012:12 APRI-7 Accident Phenomena of Risk Importance. En lägesrapport om forskningen inom området svåra haverier under åren 2009-2011
Kunskap om de fenomen som kan uppträda vid svåra haverier i en kärnkraftanläggning är en viktig förutsättning för att kunna förutse anläggningens beteende, för att kunna utforma rutiner och instruktioner för haverihantering, för beredskapsplaneringen samt för att få god kvalitet på haverianalyser och riskstudier. Sedan...
Innehållstyp: Publikationer -
2011:24 Utredning och kartläggning av tillfällen då människan räddat och förbättrat en situation där automatiken inte räckt till eller fungerat fel
ÅF har genomfört en litteraturstudie och beskrivit en aktuell bild över rådande automations-filosofier och på vilket sätt människan påverkas av olika nivåer av automation. De har även kartlagt och beskrivit tre händelser inom kärnkraftsindustrin där människan ingripit och räddat eller förbättrat en situation där...
Innehållstyp: Publikationer -
2011:16 Modelling of ultrasonic testing of cracks in cladding
During the last two decades, SSM has supported research to develop a model for the non-destructive test situation based on ultrasonic technique. Such a model is important in many ways, for example to supplement and plan experimental studies and to perform parametric studies in qualification situation. Modeling can be a useful tool when the inspection system shall be technically justified.
Innehållstyp: Publikationer -
2013:01 Validation of Weld Residual Stress Modeling in the NRC International Round Robin Study
Weld residual stresses (WRS) have a large influence on the behavior of cracks growing under normal operation loads and on the leakage flow from a through-wall crack. Accurate prediction on weld residual stresses is important to make proper decisions when cracks in weld joints are detected. During the latest years, there has been a strong development in both analytical procedures to...
Innehållstyp: Publikationer -
2012:66 Safety Leadership – the managerial art of balancing production pressure and safety
A substantial part of the project has been dedicated to investigating and characterizing ‘safety leadership’, set in the context of literature on safety leadership, safety culture and safety management, in order to build a solid theoretical basis. The authors have delved deeply into the theories and conceptualizations of leadership and analysed this area in order to further the understanding...
Innehållstyp: Publikationer