Visar 1340 sökträffar på publikationer
-
2021:08 Recent Research on EMF and Health Risk, ifteenth report from SSM’s Scientific Council on Electromagnetic Fields, 2020
SSM perspective Background The Swedish Radiation Safety Authority’s (SSM) Scientifc Council on Electromagnetic Fields monitors current research on potential health risks in relation to exposure to electromagnetic fields and provides the authority with advice on assessing possible health risks. The Council gives guidance when the authority must give an opinion on policy matters when scientific...
Innehållstyp: Publikationer -
2021:07 Scenariourval i HFE-processen Arbetssätt och kriterier vid utvärdering av konstruktionens anpassning till människans förmåga
SSM perspektiv Bakgrund På en kärnteknisk anläggning genomförs under dess livstid så kallade anläggningsändringar i syfte att åtgärda identifierade brister, eller för att av andra skäl modernisera eller förbättra anläggningens konstruktion. Vid anläggningsändringar som påverkar arbetsuppgifter som har betydelse...
Innehållstyp: Publikationer -
2021:06 Quality Assurance Review of the Swedish Nuclear Fuel and Waste Management Company’s LOT Experiment (Phase S2 and A3) at the Äspö Facility in Sweden
SSM perspective Background This report presents a quality assurance (QA) review of the work done by SKB to retrieve the S2 and A3 parcels from the Long term test of buffer material (the LOT experiment) at the Äspö Hard Rock Laboratory. Each LOT parcel comprises a heated copper tube surrounded by bentonite, with a number of copper coupons and various other test and monitoring instruments...
Innehållstyp: Publikationer -
Årsredovisning 2020
Generaldirektören har ordet Så har ytterligare ett år gått. Ett år som blev helt annorlunda än någon kunnat förutse. För en tillsynsmyndighet som Strålsäkerhetsmyndigheten (SSM) har pandemin varit en utmaning eftersom en stor del av tillsynen måste bedrivas på plats hos tillståndshavarna. Tillsynsverksamheten har därför...
Innehållstyp: Publikationer -
2021:05 Cladding tube rupture under LOCA: Data and models for rupture opening size
SSM perspective Background The Swedish Radiation Safety Authority (SSM) follows the research on fuel performance closely. One aspect that is currently being studied in several research projects is the risk of release of fragmented fuel into the primary coolant in case of an accident. This risk depends on complex conditions were one is the possibility and size of a rupture of the fuel rod...
Innehållstyp: Publikationer -
2021:04 Calibration of models for cladding tube high-temperature creep and rupture in the FRAPTRAN-QT-1.5 program
SSM perspective Background The Swedish Radiation Safety Authority (SSM) follows the research on fuel performance closely. One aspect that is currently being studied in several research projects is the risk of release of fragmented fuel into the primary coolant in case of an accident. This risk depends on complex conditions where one is the possibility and size of a rupture of the fuel rod...
Innehållstyp: Publikationer -
2021:03 Updated radiological risk assessment for the “Radon” type surface disposal facility in Chisinau, Moldova
SSM perspective Background Bilateral cooperation between Sweden and the Republic of Moldova in nuclear and radiological safety and security has been ongoing since 2010, focusing on activities aimed at strengthening the institutional capacity of the National Agency for Regulation of Nuclear and Radiological Activities in Moldova (NARNRA) as well as infrastructure development in radioactive...
Innehållstyp: Publikationer -
2021:01 In situ NMR condition monitoring of cable insulations in Nuclear Power Plants
SSM perspective Background As the nuclear power plants are ageing, it is important to verify that every component installed can function safely in the intended environment. Cables are among the most common components in a nuclear power plant and are required to function during normal operation as well as in the event of an accident. There is a need within the nuclear industry for...
Innehållstyp: Publikationer -
2021:02 On Water Induced Sensitization of Ni (Fe,Cr) alloys towards Stress Corrosion Cracking in LWR Piping from 1st Principles Modelling
SSM perspective Background In Swedish Light Water Reactors (LWR), stress corrosion cracking of reactor components and welds occurs from time to time. As the nuclear power plants are ageing, it is essential to study and further understand the mechanism for environmentally induced sensitization. Natural cracking is a phenomenon that is difficult to predict and very hard to study since it occurs...
Innehållstyp: Publikationer -
2020:16 Estimates ofJ-integral and COD for circumferential through wall cracks under global bending including the effect of pipe end restraint
SSM perspective Background Leak-before-break (LBB) piping assessments have shown that piping systems can withstand long through-wall cracks before pipe rupture is expected. This is somewhat because pipe ends are restrained. In LBB assessments analyses are often performed for a pipe segment uncoupled from the piping system, as pipe ends are assumed unrestrained. This assumption is conservative...
Innehållstyp: Publikationer