Sök

Din avgränsning ger 21 träffar.

• 2011:34 Evolution of hydrogen by copper in ultrapure water without dissolved oxygen

  One result from this research was that the experimental difficulties of repeating Hultqvist and co-workers work are considerable and were initially underestimated. The main challenge was to obtain satisfactory tightness of all connectors involved in the experimental set-up. The problems with leakage resulted in that the research program originally planned for in this project had to be reduced...

  Innehållstyp: Publikationer

• 2011:03 On Decommissioning Cost for Nuclear Power Plants

  This research report summarizes what has changed over the latest 15 years concerning actual and estimated costs for the D&D of nuclear power plants that have been shut down permanently. It also reports on the availability of detailed information for actual nuclear power plant D&D cost breakdowns. The results will be one supporting document in the review of the estimates submitted for...

  Innehållstyp: Publikationer

• 2011:30 A fatigue analysis including environmental effects for a pipe system in a Swedish BWR

  The effect of the environment on fatigue design has been the subject of intense study in USA, Japan and elsewhere. Several reports indicate a potentially large influence of the environment, leading to the proposal of entirely new analysis procedures. SSM has in an earlier project sponsored research to evaluate the technical basis for these proposals, see SSM Research Report 2011:04. In the...

  Innehållstyp: Publikationer

• 2011:24 Utredning och kartläggning av tillfällen då människan räddat och förbättrat en situation där automatiken inte räckt till eller fungerat fel

  ÅF har genomfört en litteraturstudie och beskrivit en aktuell bild över rådande automations-filosofier och på vilket sätt människan påverkas av olika nivåer av automation. De har även kartlagt och beskrivit tre händelser inom kärnkraftsindustrin där människan ingripit och räddat eller förbättrat en situation där...

  Innehållstyp: Publikationer

• 2011:20 A Guidebook for Evaluating Organizations in the Nuclear Industry – an example of safety culture evaluation

  Organizations in the nuclear industry need to maintain an overview on their vulnerabilities and strengths with respect to safety. Systematic periodical self- assessments are necessary to achieve this overview. This guidebook provides suggestions and examples to assist power companies but also external evaluators and regulators in carrying out organizational evaluations. Organizational...

  Innehållstyp: Publikationer

• 2011:16 Modelling of ultrasonic testing of cracks in cladding

  During the last two decades, SSM has supported research to develop a model for the non-destructive test situation based on ultrasonic technique. Such a model is important in many ways, for example to supplement and plan experimental studies and to perform parametric studies in qualification situation. Modeling can be a useful tool when the inspection system shall be technically justified.

  Innehållstyp: Publikationer

• 2011:13 Investigation of Discrete-Fracture Network Conceptual Model Uncertainty at Forsmark

  Flow modelling using alternative assumptions regarding conceptual and parametric uncertainty in the spatial and structural relationships among fractures indicates elevated flow rates and groundwater velocities to deposition holes compared to SKB’s flow modelling results. Simulated sampling of fractures in boreholes does not indicate any reason to exclude the proposed spatial and structural...

  Innehållstyp: Publikationer

• 2011:06 Reliability Data Handbook for Piping Components in Nordic Nuclear Power Plants – R Book, Phase 2

  The Nordic PSA Group (NPSAG) has undertaken to develop a piping reliability parameter handbook for use in risk-informed applications that involve the consideration of structural integrity of piping systems. The scope of the handbook is to establish high quality reliability parameters that account for the Nordic and worldwide service experience with safety-related and non-safety-related piping...

  Innehållstyp: Publikationer

• 2011:05 Overview and Evaluation of the NESC Projects for Fracture Assessments of Nuclear Components

  The Network for Evaluation of Structural Components (NESC) was started in 1993 and since then six different projects have been carried out. A seventh NESC-project is still in progress. The overall objective of these projects has been to study the reliability of the entire process of structural integrity assessment within an international framework. The network is coordinated by the European...

  Innehållstyp: Publikationer

• 2011:04 Evaluation of the Technical Basis for New Proposals of Fatigue Design of Nuclear Components

  During the recent years fatigue analysis procedures for nuclear components have been investigated. The most common method so far has been the American code ASME III. The basis for the current design procedures in ASME III is quite old and has now been evaluated against modern data leading to the proposal of modified design curves. Also the effect of the environment has been the subject of...

  Innehållstyp: Publikationer