Sök

Din avgränsning ger 112 träffar.

• 2011:09 Is Copper Immune to Corrosion When in Contact With Water and Aqueous Solutions?

  The KBS-3concept implies that spent nuclear fuel is placed in copper canisters surrounded by clay and finally placed approximately 500 m down from surface into granitic bedrock, in order to isolate the spent nuclear fuel from humans and environment for very long time scales (i.e. millions of years). The concept is based on the multi-barrier principle, in this respect the barriers are the...

  Innehållstyp: Publikationer

• 2011:34 Evolution of hydrogen by copper in ultrapure water without dissolved oxygen

  One result from this research was that the experimental difficulties of repeating Hultqvist and co-workers work are considerable and were initially underestimated. The main challenge was to obtain satisfactory tightness of all connectors involved in the experimental set-up. The problems with leakage resulted in that the research program originally planned for in this project had to be reduced...

  Innehållstyp: Publikationer

• 2011:08 Workshop on Copper Corrosion and Buffer Erosion Stockholm 15-17 September 2010

  In SSM:s preparation for reviewing SKB:s license application for disposal of spent nuclear fuel, a series of technical workshops have been conducted. The main purpose of this type of workshops is to get an overall understanding of the state of knowledge on interdisciplinary issues as well as of questions in the research front by inviting several experts. Previous workshops have addressed the...

  Innehållstyp: Publikationer

• 2012:61 Geochemical Constraints on Buffer Pore Water Evolution and Implications for Erosion

  Mineralogical data from the Forsmark Site show that smectite and calcite occur at all depths in Forsmark fractures, with no evidence for removal/dissolution by previous glacial episodes. This natural analogue information implies that these minerals may not have been eroded/dissolved during previous glacial episodes. Available thermodynamic data suggest that repository-depth Forsmark...

  Innehållstyp: Publikationer

• 2009:33 Workshop on spent fuel performance, radionuclide chemistry and geosphere transport parameters, Lidingö 2008: Overview and evaluation of recent SKB procedures

  The safety assessment for disposal of spent nuclear fuel canister in the Swedish bedrock should thoroughly address the time period after a containment failure. Such a failure could be expected as a result of corrosion damage or mechanical failure due to rock movement. This report mainly covers some issues connected to parameters used for radionuclide transport calculations in the areas of...

  Innehållstyp: Publikationer

• 2009:35 Evaluation of SKB/Posiva’s report on the horizontal alternative of the KBS-3 method

  The KBS-3 method, based on multiple barriers, is the proposed spent fuel disposal method both in Sweden and Finland. The method has two design alternatives: the vertical (KBS-3V) and the horizontal (KBS-3H). SKB and Posiva have conducted a joint research, development and demonstration (RD&D) programme in 2002-2007 with the overall aim of establishing whether the KBS-3H represents a...

  Innehållstyp: Publikationer

• 2014:20 An evaluation of high-temperature creep of zirconium alloys: data versus models

  In this report Dr Massih presents correlations for creep in different phases of zirconium alloys and also presents a general solution to the difficulty of accurately describing the material properties in phase transition for several zirconium alloys. Based upon superplasticity relations, models are adapted to fit with experimental data for materials in transition regions. The creep models are...

  Innehållstyp: Publikationer

• 2011:16 Modelling of ultrasonic testing of cracks in cladding

  During the last two decades, SSM has supported research to develop a model for the non-destructive test situation based on ultrasonic technique. Such a model is important in many ways, for example to supplement and plan experimental studies and to perform parametric studies in qualification situation. Modeling can be a useful tool when the inspection system shall be technically justified.

  Innehållstyp: Publikationer

• 2011:13 Investigation of Discrete-Fracture Network Conceptual Model Uncertainty at Forsmark

  Flow modelling using alternative assumptions regarding conceptual and parametric uncertainty in the spatial and structural relationships among fractures indicates elevated flow rates and groundwater velocities to deposition holes compared to SKB’s flow modelling results. Simulated sampling of fractures in boreholes does not indicate any reason to exclude the proposed spatial and structural...

  Innehållstyp: Publikationer

• 2008:10 User’s manual for Ecolego Toolbox and the Discretization Block

  The CLIMB modelling team (Catchment LInked Models of radiological effects in the Biosphere) was instituted in 2004 to provide SSI with an independent modelling capability when reviewing SKB’s assessment of long-term safety for a geological repository. Modelling in CLIMB covers all aspects of performance assessment (PA) from near-field releases to radiological consequences in the surface...

  Innehållstyp: Publikationer