Din avgränsning ger 419 träffar.
-
2018:18 Procedure for Safety Assessment of Components with Defects
– Handbook Edition 5...
Innehållstyp: Publikationer -
2017:20 Assessment of inertia effects on transient clad-to-coolant heat transfer and coolant flow under reactivity initiated accidents
In this report, simple hydrodynamic models are used for studying the effects of coolant inertia on fuel-to-coolant heat transfer and coolant flow under reactivity initiated accidents in light water reactors. The objective is to assess if the inertia effects are important enough to warrant modification of QT-COOL, a coolant channel module for two-phase flow that has recently been implemented as...
Innehållstyp: Publikationer -
2017:16 Stress intensity factor solutions for circumferential cracks in cylindrical bars under axisymmetric loading and global bending
Background The case of a circumferential crack in a cylindrical bar has not been available in the ProSACC code. The need for such a geometry, especially considering nonlinear axisymmetric loading and global bending, has motivated the development of new stress intensity factor solutions, also known as K-solutions. These new K-solutions will be available in ISAAC, the successor to ProSACC.
Innehållstyp: Publikationer -
2015:13 Samband mellan anrikning av uran och andra ämnen – en studie från ett icke-spridningsperspektiv
Även om anrikning av uran inte är strikt nödvändigt för att producera kärnvapen har alla kända kärnvapenprogram innehållit anrikning i någon form. Den utrustning som behövs för anrikning av uran är exportkontrollerad och den svenska lagstiftningen kräver tillstånd för export av all utrustning och teknik som är...
Innehållstyp: Publikationer -
2019:13 Organisatoriska risker avseende strålsäkerhet i ekonomiskt pressade lägen
SSM perspektiv Bakgrund Kärnkraftsbranschen befinner sig i en ekonomiskt pressad situation. Höjda säkerhetskrav, åldrade anläggningar som kräver mer underhåll och låga elpriser leder till att resursanvändningen måste maximeras. Stora projekt pågår hos tillståndshavarna i syfte att effektivisera organisationerna. Nedskärningar...
Innehållstyp: Publikationer -
2019:04 Dosimetry in environments surrounding a laser-plasma accelerator
SSM perspective Background Modern laser technology makes it possible to generate ultrashort pulses with a very high peak power. At the Lund Laser Centre, a high-power laser facility in Lund, Sweden, laser pulses having a duration of approximately 30 femtoseconds are generated with a maximum peak power of up to 40 terawatts. When these pulses are focused, extreme light intensity is achieved.
Innehållstyp: Publikationer -
2020:12 Assessment of the QT-COOL coolant channel module against the PBF RIA 1-2 experiment
SSM perspective Background The fuel rod analysis program SCANAIR has been developed by IRSN (Institut de Radioprotection et de Sûreté Nucléaire) for analysis of reactivity initiated accidents (RIA) in light water reactors. The Swedish Radiation Safety Authority (SSM) has access to SCANAIR in exchange for annual contributions for its further development. This ensures a possibility...
Innehållstyp: Publikationer -
2011:12 Analysis of Barrier Performance: Modelling of Copper corrosion scenarios with and without buffer erosion
The purpose of this project was to develop a numerical modelling capacity to address the corrosion of the copper canister under gradually changing transport conditions caused by buffer erosion and removal of buffer mass. Due to the complexity of this task, such a model cannot be realistic in all respects, but the present effort should address the feasibility of solving numerical and...
Innehållstyp: Publikationer -
2011:11 Handling Interfaces and Time-varying Properties in Radionuclide Transport Models
Quintessa’s QPAC code has been used to investigate the Qeq approach. The conclusions from this simulation study are the following. The basic approach to calculating Qeq values is sound, however, narrow channels could lead to the same release as larger fractures with the same pore velocity, so a channel enhancement factor of √10 should be considered. A spalling zone that increases the area of...
Innehållstyp: Publikationer -
2007:12 Development of a constitutive model for the plastic deformation and creep of copper and its use in the estimate of the creep life of the copper canister
The copper-iron canister for disposal of nuclear waste in the Swedish Programme has a design life exceeding 100,000 years. Whilst the operating temperature and operating stress are modest, the very long design life does require that the likely creep performance of the canister should be investigated. Many studies have been carried out by SKB but these have all involved very short duration...
Innehållstyp: Publikationer