Din avgränsning ger 426 träffar.
-
2016:30 Measurement of Parameter Values for Predicting Corrosion Phenomena on Copper in Swedish HLNW Repositories
Passivity breakdown and pitting on pure copper, the assumed material for the canisters for the isolation of high-level nuclear waste in Sweden, has been studied in simulated, sulphide- and chloride containing granitic rock groundwater and the data are interpreted in terms of the Point Defect Model (PDM). The results indicated that a sulphide barrier layer forms on the copper surface, and that...
Innehållstyp: Publikationer -
2017:18 FEM analysis of the mechanical integrity for the canister intended for storage of spent nuclear fuel with regard to copper creep ductility
Background For final storage of spent nuclear fuel it is suggested by the Swedish nuclear fuel and waste management company (SKB) to emplace the nuclear fuel into copper canisters which are surrounded by bentonite clay at approximately 500 meters’ depth into granitic rock. After emplacement of the canisters Bentonite swelling due to water saturation and hydrostatic pressure build up the...
Innehållstyp: Publikationer -
2017:02 Slow strain rate testing of copper in sulfide rich chloride containing deoxygenated water at 90 °C
Background Stress corrosion cracking (SCC) can occur in materials from the combined influence of tensile stress and a corrosive environment. It has previously been shown in the literature, that copper can be sensitive to SCC in the presence of sulfide containing water. Since both tensile...
Innehållstyp: Publikationer -
2019:04 Dosimetry in environments surrounding a laser-plasma accelerator
SSM perspective Background Modern laser technology makes it possible to generate ultrashort pulses with a very high peak power. At the Lund Laser Centre, a high-power laser facility in Lund, Sweden, laser pulses having a duration of approximately 30 femtoseconds are generated with a maximum peak power of up to 40 terawatts. When these pulses are focused, extreme light intensity is achieved.
Innehållstyp: Publikationer -
2011:26 The influence of temperature and fluid pressure on the fracture network evolution around deposition holes of a KBS-3V concept at Forsmark, Sweden
In preparation for the review of SKB’s license application for disposal of spent nuclear fuel, SSM is conducting studies to evaluate the performance of the multi-barrier principle on which the KBS-3 concept is based. Copper canisters containing the spent nuclear fuel are placed into granitic bedrock at about 500 m depth and embedded in clay. Thus, the rock, the clay and the copper canister...
Innehållstyp: Publikationer -
2012:11 Issues in the corrosion of copper in a Swedish high level nuclear waste repository
The objective with this research project was to increase knowledge in the area of copper corrosion in the planned repository environment and obtain information on how copper corrosion evolves during the assessment period of 100 000 years. The equilibrium chemical composition of groundwater close to the canister as a function of temperature has been calculated by use of a thermodynamics code...
Innehållstyp: Publikationer -
2013:07 Corrosion of copper in distilled water without molecular oxygen and the detection of produced hydrogen
In this report, results are presented for copper which has been exposed to pure anoxic water in the temperature interval of 21 °C to 55 °C up to a total of 19 000 hours. Characterisations of copper surfaces after exposure have been performed ex-situ, meaning after termination of the experiment and exposing the specimen to normal atmospheric environment. Ideally characterisation of surfaces...
Innehållstyp: Publikationer -
2010:41 Rock-block configuration in Uppland and the Ålands-hav basin, the regional surroundings of the SKB site in Forsmark, Sea and land areas, eastern Sweden
This report concerns a study which was initially conducted for the Swedish Nuclear Power Inspectorate (SKI), which is now merged into the Swedish Radiation Safety Authority (SSM). The conclusions and viewpoints presented in the report are those of the authors and do not necessarily coincide with those of the SSM. The topography in Uppland is more broken in the sea area east and northeast of...
Innehållstyp: Publikationer -
2010:40 Rock-block characterization on regional to local scales for two SKB sites in Forsmark – Uppland and Laxemar – eastern Småland, south-eastern Sweden
To get an overall impression of the general structural setting of a landscape, a remote study of bedrock structures should include studies of the geomorphology at various scales. Thematic maps improve the general understanding of an area. Digital elevation data in 500m, 50m and 10m grids were used for rock-block interpretations at regional, semi-regional and local scales of areas around the...
Innehållstyp: Publikationer -
2010:38 The feasibility of Backfilling a Repository of Spent Fuel: An Assessment of Recent Developments by SKB
In the Review Statement and Evaluation of SKB’s RD & D programme 2007 (SKI Report 2008:48E), the former Swedish Nuclear Power Inspectorate (SKI) commented that considerable work remained to be done for knowledge of both practical management issues on backfilling and analysis of long-term backfill evolution to reach the same level as for the canister and the buffer. SKI considered that the...
Innehållstyp: Publikationer