Din avgränsning ger 426 träffar.
-
2007:19 An Applied Study of Implementation of the Advanced Decommissioning Costing Methodology for Intermediate Storage Facility for Spent Fuel in Studsvik, Sweden with special emphasis to the application of the Omega code
The aim of this applied study has been to describe in a systematic way an appropriate methodological sequence for cost estimation of crucial parameters in decontamination and decommission processes. The work has been limited to older nuclear installations and facilities. Furthermore, it may be envisaged that the process of estimating the parameters of decommissioning is one of the main issues...
Innehållstyp: Publikationer -
2011:26 The influence of temperature and fluid pressure on the fracture network evolution around deposition holes of a KBS-3V concept at Forsmark, Sweden
In preparation for the review of SKB’s license application for disposal of spent nuclear fuel, SSM is conducting studies to evaluate the performance of the multi-barrier principle on which the KBS-3 concept is based. Copper canisters containing the spent nuclear fuel are placed into granitic bedrock at about 500 m depth and embedded in clay. Thus, the rock, the clay and the copper canister...
Innehållstyp: Publikationer -
2012:11 Issues in the corrosion of copper in a Swedish high level nuclear waste repository
The objective with this research project was to increase knowledge in the area of copper corrosion in the planned repository environment and obtain information on how copper corrosion evolves during the assessment period of 100 000 years. The equilibrium chemical composition of groundwater close to the canister as a function of temperature has been calculated by use of a thermodynamics code...
Innehållstyp: Publikationer -
2011:12 Analysis of Barrier Performance: Modelling of Copper corrosion scenarios with and without buffer erosion
The purpose of this project was to develop a numerical modelling capacity to address the corrosion of the copper canister under gradually changing transport conditions caused by buffer erosion and removal of buffer mass. Due to the complexity of this task, such a model cannot be realistic in all respects, but the present effort should address the feasibility of solving numerical and...
Innehållstyp: Publikationer -
2011:11 Handling Interfaces and Time-varying Properties in Radionuclide Transport Models
Quintessa’s QPAC code has been used to investigate the Qeq approach. The conclusions from this simulation study are the following. The basic approach to calculating Qeq values is sound, however, narrow channels could lead to the same release as larger fractures with the same pore velocity, so a channel enhancement factor of √10 should be considered. A spalling zone that increases the area of...
Innehållstyp: Publikationer -
2018:12 Upparbetning av använt kärnbränsle med icke-vätskebaserade metoder
Bakgrund Sverige har en exportlagstiftning för kontroll av utförsel av speciellt känslig utrustning som kan användas för bl.a. tillverkning av kärnvapen. Syftet är att förhindra att någon stat eller organisation införskaffar sådana vapen. Utrustningen det är frågan om har ofta en legitim användning i civil industri men kan ha...
Innehållstyp: Publikationer -
2018:16 APRI 9 – Accident Phenomena of Risk Importance
En lägesrapport om forskningen inom området svåra haverier under åren 2015-2017.
Innehållstyp: Publikationer -
2013:09 An Application of the Functional Resonance Analysis Method (FRAM) to Risk Assessment of Organisational Change
The objective of this study was to demonstrate an alternative approach to risk assessment of organisational changes, based on the principles of resilience engineering. The approach in question was the Functional Resonance Analysis Method (FRAM). Whereas established approaches focus on risks coming from failure or malfunctioning of components, alone or in combination, resilience engineering...
Innehållstyp: Publikationer -
2018:17 Assessment of structures subject to concrete pathologies (ASCET), phase 2
Background ASCET is an international research project initiated by WGIAGE1 OECD2 / NEA3. WGIAGE4 Concrete subgroup is a working group within the OECD / NEA whose task is to address issues concerning the maintenance of the integrity of concrete structures, proposals for general principles to optimally handle the challenges of integrity, especially with regard to aging of concrete structures.
Innehållstyp: Publikationer -
2012:70 Process Parameters Affecting Inhomogeneity of Material Microstructure
There’s been a tremendous change in the number, product types, locations, equipment, and manufacturing capabilities of stainless steel producers from the late 1960’s to present. This reconfiguration of the global steel industry occurred between the early 1970’s to the mid 1980’s and continues today. These changes have produced a loss in manufacturing flexibility, due to the inherent...
Innehållstyp: Publikationer