Sök

Din avgränsning ger 27 träffar.

• 2011:09 Is Copper Immune to Corrosion When in Contact With Water and Aqueous Solutions?

  The KBS-3concept implies that spent nuclear fuel is placed in copper canisters surrounded by clay and finally placed approximately 500 m down from surface into granitic bedrock, in order to isolate the spent nuclear fuel from humans and environment for very long time scales (i.e. millions of years). The concept is based on the multi-barrier principle, in this respect the barriers are the...

  Innehållstyp: Publikationer

• 2011:08 Workshop on Copper Corrosion and Buffer Erosion Stockholm 15-17 September 2010

  In SSM:s preparation for reviewing SKB:s license application for disposal of spent nuclear fuel, a series of technical workshops have been conducted. The main purpose of this type of workshops is to get an overall understanding of the state of knowledge on interdisciplinary issues as well as of questions in the research front by inviting several experts. Previous workshops have addressed the...

  Innehållstyp: Publikationer

• 2011:03 On Decommissioning Cost for Nuclear Power Plants

  This research report summarizes what has changed over the latest 15 years concerning actual and estimated costs for the D&D of nuclear power plants that have been shut down permanently. It also reports on the availability of detailed information for actual nuclear power plant D&D cost breakdowns. The results will be one supporting document in the review of the estimates submitted for...

  Innehållstyp: Publikationer

• 2011:34 Evolution of hydrogen by copper in ultrapure water without dissolved oxygen

  One result from this research was that the experimental difficulties of repeating Hultqvist and co-workers work are considerable and were initially underestimated. The main challenge was to obtain satisfactory tightness of all connectors involved in the experimental set-up. The problems with leakage resulted in that the research program originally planned for in this project had to be reduced...

  Innehållstyp: Publikationer

• 2011:20 A Guidebook for Evaluating Organizations in the Nuclear Industry – an example of safety culture evaluation

  Organizations in the nuclear industry need to maintain an overview on their vulnerabilities and strengths with respect to safety. Systematic periodical self- assessments are necessary to achieve this overview. This guidebook provides suggestions and examples to assist power companies but also external evaluators and regulators in carrying out organizational evaluations. Organizational...

  Innehållstyp: Publikationer

• 2011:06 Reliability Data Handbook for Piping Components in Nordic Nuclear Power Plants – R Book, Phase 2

  The Nordic PSA Group (NPSAG) has undertaken to develop a piping reliability parameter handbook for use in risk-informed applications that involve the consideration of structural integrity of piping systems. The scope of the handbook is to establish high quality reliability parameters that account for the Nordic and worldwide service experience with safety-related and non-safety-related piping...

  Innehållstyp: Publikationer

• 2010:36 Guidance for the Definition and Application of Probabilistic Safety Criteria

  Safety goals are defined in different ways in different countries and also used differently. Many countries are presently developing them in connection to the transfer to risk-informed regulation of both operating nuclear power plants (NPP) and new designs. However, it is far from self-evident how probabilistic safety criteria should be defined and used. On one hand, experience indicates that...

  Innehållstyp: Publikationer

• 2011:16 Modelling of ultrasonic testing of cracks in cladding

  During the last two decades, SSM has supported research to develop a model for the non-destructive test situation based on ultrasonic technique. Such a model is important in many ways, for example to supplement and plan experimental studies and to perform parametric studies in qualification situation. Modeling can be a useful tool when the inspection system shall be technically justified.

  Innehållstyp: Publikationer

• 2011:05 Overview and Evaluation of the NESC Projects for Fracture Assessments of Nuclear Components

  The Network for Evaluation of Structural Components (NESC) was started in 1993 and since then six different projects have been carried out. A seventh NESC-project is still in progress. The overall objective of these projects has been to study the reliability of the entire process of structural integrity assessment within an international framework. The network is coordinated by the European...

  Innehållstyp: Publikationer

• 2011:13 Investigation of Discrete-Fracture Network Conceptual Model Uncertainty at Forsmark

  Flow modelling using alternative assumptions regarding conceptual and parametric uncertainty in the spatial and structural relationships among fractures indicates elevated flow rates and groundwater velocities to deposition holes compared to SKB’s flow modelling results. Simulated sampling of fractures in boreholes does not indicate any reason to exclude the proposed spatial and structural...

  Innehållstyp: Publikationer