Din avgränsning ger 496 träffar.
-
2011:16 Modelling of ultrasonic testing of cracks in cladding
During the last two decades, SSM has supported research to develop a model for the non-destructive test situation based on ultrasonic technique. Such a model is important in many ways, for example to supplement and plan experimental studies and to perform parametric studies in qualification situation. Modeling can be a useful tool when the inspection system shall be technically justified.
Innehållstyp: Publikationer -
2013:01 Validation of Weld Residual Stress Modeling in the NRC International Round Robin Study
Weld residual stresses (WRS) have a large influence on the behavior of cracks growing under normal operation loads and on the leakage flow from a through-wall crack. Accurate prediction on weld residual stresses is important to make proper decisions when cracks in weld joints are detected. During the latest years, there has been a strong development in both analytical procedures to...
Innehållstyp: Publikationer -
2011:13 Investigation of Discrete-Fracture Network Conceptual Model Uncertainty at Forsmark
Flow modelling using alternative assumptions regarding conceptual and parametric uncertainty in the spatial and structural relationships among fractures indicates elevated flow rates and groundwater velocities to deposition holes compared to SKB’s flow modelling results. Simulated sampling of fractures in boreholes does not indicate any reason to exclude the proposed spatial and structural...
Innehållstyp: Publikationer -
2011:30 A fatigue analysis including environmental effects for a pipe system in a Swedish BWR
The effect of the environment on fatigue design has been the subject of intense study in USA, Japan and elsewhere. Several reports indicate a potentially large influence of the environment, leading to the proposal of entirely new analysis procedures. SSM has in an earlier project sponsored research to evaluate the technical basis for these proposals, see SSM Research Report 2011:04. In the...
Innehållstyp: Publikationer -
2013:04 Research and Development Program in Reactor Diagnostics and Monitoring with Neutron Noise Methods, Stage 18
The program executed in Stage 18 consists of the following three parts: Application of CoreSim with a two-dimensional model of vibrating fuel assemblies, for the calculation of ex-core detector noise throughout a fuel cycle; An investigation of the neutron noise, induced by propagating perturbations, in various thermal and fast reactor systems, in two-group theory; A consistent derivation of...
Innehållstyp: Publikationer -
2016:39 Recommended residual stress profiles for stainless steel pipe welds
Background The Swedish Radiation Safety Authority (SSM) and the Swedish nuclear power plant owners have financed Inspecta Technology in Sweden to analyze stainless steel pipe welds to obtain good estimations of weld residual stress (WRS) distributions. Detailed knowledge of the residual stress field in different types of welds is important since they can have substantial influence on...
Innehållstyp: Publikationer -
2013:29 Regulatory Approaches in Nuclear Power Supervision
The objective of this follow-up study was to support SSM in further understanding regulatory approaches and how they can be combined as part of effective strategies. The survey was intended to assist SSM in identifying current standards, experiences, and practices in the regulation of nuclear power plants. The results will also be valuable for the participating authorities as well as other...
Innehållstyp: Publikationer -
2015:44 Krav på funktion, konstruktion och provning av reaktorinneslutningar
Bakgrund I Sverige behöver SSM skaffa vidare kunskap inom olika områden inom nukleära byggnadskonstruktioner bl.a. reaktorinneslutningar. Syfte Syftet med projektet "Krav på funktion, konstruktion och provning av reaktorinneslutningar" är att sammanställa information för att belysa viktiga reaktorinneslutningsfrågor vid byggnation. Den sammanställda...
Innehållstyp: Publikationer -
2014:13 Förutsättningar för att upprätthålla och utveckla en välfungerande verksamhet kring erfarenhetsåterföring
Studien har bland annat omfattat att utreda eventuella hinder för tillståndshavarna att upprätthålla och utveckla en effektiv verksamhet kring erfarenhetsåterföring. Studien visade att de största hindren inom de studerade kärnkraftverken ligger i tids- och resursbrist samt i avsaknad av systemstöd och metoder för utvärdering. Processerna förefaller...
Innehållstyp: Publikationer -
2013:24 Modelling of nuclear fuel cladding under loss-of-coolant accident conditions
We present a unified model for calculation of zirconium alloy fuel cladding rupture during a postulated loss-of-coolant accident in light water reactors. The model treats the Zr alloy solid-to-solid phase transformation kinetics, cladding creep deformation, oxidation and rupture as a function of temperature and time in an integrated fashion during the transient. The fuel cladding material...
Innehållstyp: Publikationer