Sök

Din avgränsning ger 484 träffar.

• 2013:24 Modelling of nuclear fuel cladding under loss-of-coolant accident conditions

  We present a unified model for calculation of zirconium alloy fuel cladding rupture during a postulated loss-of-coolant accident in light water reactors. The model treats the Zr alloy solid-to-solid phase transformation kinetics, cladding creep deformation, oxidation and rupture as a function of temperature and time in an integrated fashion during the transient. The fuel cladding material...

  Innehållstyp: Publikationer

• 2013:04 Research and Development Program in Reactor Diagnostics and Monitoring with Neutron Noise Methods, Stage 18

  The program executed in Stage 18 consists of the following three parts: Application of CoreSim with a two-dimensional model of vibrating fuel assemblies, for the calculation of ex-core detector noise throughout a fuel cycle; An investigation of the neutron noise, induced by propagating perturbations, in various thermal and fast reactor systems, in two-group theory; A consistent derivation of...

  Innehållstyp: Publikationer

• 2015:46 Assessment of data and criteria for cladding burst in loss-of-coolant accidents

  Ali R. Massih, Lars Olof Jernkvist SSM English...

  Innehållstyp: Publikationer

• 2009:16 Influence of Hardening Model on Weld Residual Stress Distribution

  Weld residual stresses have a large influence on the behavior of cracks growing under normal operation loads and on the leakage-flow from a through-wall crack. Accurate prediction of these events is important in order to arrive at proper conclusions when assessing detected flaws, for inspection planning and for assessment of leak-before-break margins. Therefore, it is very important to have...

  Innehållstyp: Publikationer

• 2009:38 Research and Development Program in Reactor Diagnostics and Monitoring with Neutron Noise Methods, Stages 14 and 15

  This report constitutes Stages 14 and 15 of a long-term research and development program concerning the development of diagnostics and monitoring methods for nuclear reactors. Stage 14 was a full one-year project, whereas Stage 15 consisted of a half-year project. Results up to Stage 13 were reported in SKI reports, as listed below and in the Summary. The results have also been published in...

  Innehållstyp: Publikationer

• 2011:04 Evaluation of the Technical Basis for New Proposals of Fatigue Design of Nuclear Components

  During the recent years fatigue analysis procedures for nuclear components have been investigated. The most common method so far has been the American code ASME III. The basis for the current design procedures in ASME III is quite old and has now been evaluated against modern data leading to the proposal of modified design curves. Also the effect of the environment has been the subject of...

  Innehållstyp: Publikationer

• 2010:45 Evaluation of models for cyclic plastic deformation – A literature study

  Analysis of nuclear components subjected to cyclic plastic deformation is normally based on the American standard ASME III. With the focus to improve the modeling of the stress-strain response under non-monotonic loading, several models for the analysis of cyclic plastic deformation have been developed in recent years. However, experience shows that the analysis and evaluation of plastic...

  Innehållstyp: Publikationer

• Regelverk för slutna strålkällor

  I tabellen nedan finner du de lagar, förordningar och föreskrifter som berör slutna strålkällor. Under tabellen har vi lyft fram några viktiga punkter i våra föreskrifter som rör forskningsarbete med slutna strålkällor.

  Innehållstyp: Artiklar

• 2015:25 Design Guide for Nuclear Civil Structures (DNB)

  The Swedish Radiation Safety Authority (SSM) and the Swedish licensees have previously in a jointly funded research project developed a design guide for civil structures at Swedish nuclear facilities to be based on Eurocodes, DNB. The report was published in January 2014 as SSM Report 2014:06. To further improve DNB and to ensure that the fundamentals of the recommendations will be applied...

  Innehållstyp: Publikationer

• 2018:21 Research on Resaturation of Bentonite Buffer

  Background Resaturation processes in the bentonite buffer in a KBS-3 type repository for spent nuclear fuel are complicated and are often illustrated, analysed and modelled multi-disciplinarily as coupled thermal (T), hydrological (H) and mechanical (M) processes with multi-phase flow, elastoplastic evolution in a swelling porous medium. Previous THM-modelling showed that the re-saturation...

  Innehållstyp: Publikationer