Din avgränsning ger 491 träffar.
-
1999:13 Determination of the Neutron and Photon Dose Equivalent at Work Places in Nuclear Facilities of Sweden
Various mixed neutron-photon fields at workplaccs in the containment of pressurised water reactors and in the vicinity of transport containers with spent fuel elements were investigated with spectrometers and dosimeters.The spectral neutron fluences evaluated from measurements with multisphere systems were recommended to be used for the calculation of dosimetric reference values for...
Innehållstyp: Publikationer -
1993:11 Methods for determination of strontium -90 in food and environmental samples by Cerenkov counting
The procedure for determination of strontuim-90 (=yttrium-90) by HDEHPextraction of yttrium-90 and counting the Cerenkov radiation in a liquid scintillation counter, is applicable for all kind of samples. Prior to analyses liquid samples are evaporated to dryness and ashed. Environmental and food samples are oven dried and ashed. The ash is dissolved in 1 molar hydrochloric acid and, at pH...
Innehållstyp: Publikationer -
2020:11 Competency based assessments of Nuclear Power Plant controlroom operators
Experiences of development and first operational methodological and technical demonstrator application...
Innehållstyp: Publikationer -
2020:12 Assessment of the QT-COOL coolant channel module against the PBF RIA 1-2 experiment
SSM perspective Background The fuel rod analysis program SCANAIR has been developed by IRSN (Institut de Radioprotection et de Sûreté Nucléaire) for analysis of reactivity initiated accidents (RIA) in light water reactors. The Swedish Radiation Safety Authority (SSM) has access to SCANAIR in exchange for annual contributions for its further development. This ensures a possibility...
Innehållstyp: Publikationer -
2020:07 Fibre Clogging in Nuclear Power Plants
SSM perspective Background Emergency core cooling systems in boiling- and pressurized water reactors use strainers. Their purpose is to out foreign material suspended in the cooling water so this material does not reach the reactor. After the 1992 event at Barsebäck nuclear power plant when the strainers of the emergency cooling system was clogged due to fibers in the cooling water, all...
Innehållstyp: Publikationer -
2021:12 Magnetfält runt nätstationer
SSM perspektiv Bakgrund Transformatorstationer (TRAFO) kan i sitt närområde ge starkt förhöjda magnetfält. Ibland placeras sådana stationer relativt nära bostadsmiljöer och även stationer placerade i bostadshus förekommer. De stationer som placeras på detta sätt är stationer som ger en spänningstransformation från ca 11...
Innehållstyp: Publikationer -
2021:21 Region-specific radioecological evaluation of accidental releases of radionuclides from ESS
SSM perspective Background To strengthen the material science research in Europe, the European Spallation Source (ESS) is being built in Lund in the southern part of Sweden. In the spallation process, neutrons are generated when the accelerated protons hit the tungsten target. In addition, a broad range of radioactive by-products are produced that differs from the fission products produced in...
Innehållstyp: Publikationer -
2021:01 In situ NMR condition monitoring of cable insulations in Nuclear Power Plants
SSM perspective Background As the nuclear power plants are ageing, it is important to verify that every component installed can function safely in the intended environment. Cables are among the most common components in a nuclear power plant and are required to function during normal operation as well as in the event of an accident. There is a need within the nuclear industry for...
Innehållstyp: Publikationer -
2021:02 On Water Induced Sensitization of Ni (Fe,Cr) alloys towards Stress Corrosion Cracking in LWR Piping from 1st Principles Modelling
SSM perspective Background In Swedish Light Water Reactors (LWR), stress corrosion cracking of reactor components and welds occurs from time to time. As the nuclear power plants are ageing, it is essential to study and further understand the mechanism for environmentally induced sensitization. Natural cracking is a phenomenon that is difficult to predict and very hard to study since it occurs...
Innehållstyp: Publikationer -
2021:05 Cladding tube rupture under LOCA: Data and models for rupture opening size
SSM perspective Background The Swedish Radiation Safety Authority (SSM) follows the research on fuel performance closely. One aspect that is currently being studied in several research projects is the risk of release of fragmented fuel into the primary coolant in case of an accident. This risk depends on complex conditions were one is the possibility and size of a rupture of the fuel rod...
Innehållstyp: Publikationer