Din avgränsning ger 496 träffar.
-
2015:17 Kännetecken för välfungerande ledningssystem i säkerhetskritisk verksamhet
Studien omfattar en litteraturgenomgång kring ledningssystem och dess komponenter samt en intervjuundersökning för att få synpunkter från ett antal utvalda personer med erfarenhet av att arbeta med ledningssystem på olika nivåer. Av resultaten framkommer att erfarenheter från stora olyckor ofta visar på brister i ledningssystemet och att fungerande...
Innehållstyp: Publikationer -
2015:11 Investigation of the Distribution of Phosphorus in Copper
Two copper alloys containing different amounts of phosphorus, 6 and 80 wtppm, respectively, have been investigated. The matrix of both alloys was analysed using atom probe tomography (APT). The matrix P concentration in the 80 wtppm P mate- rial was about the same as the bulk concentration and it was therefore concluded that the majority of the P atoms resides in the matrix. Grain boundaries...
Innehållstyp: Publikationer -
2014:20 An evaluation of high-temperature creep of zirconium alloys: data versus models
In this report Dr Massih presents correlations for creep in different phases of zirconium alloys and also presents a general solution to the difficulty of accurately describing the material properties in phase transition for several zirconium alloys. Based upon superplasticity relations, models are adapted to fit with experimental data for materials in transition regions. The creep models are...
Innehållstyp: Publikationer -
2015:07 TEM-lamella lift-out from the crack tip region of Alloy 600 for high resolution electron microscopy examination
This report contributes to the development of a method for high-quality TEM lamella preparation from crack tip regions of nuclear materials. A standard compact tension (CT) specimen of Alloy 600 previously tested for stress corrosion crack growth in simulated PWR primary water was used to demonstrate the benefit of the proposed method. This report describes the procedure for cutting the CT...
Innehållstyp: Publikationer -
2015:43 Robust structural verification of pressurized nuclear components subjected to ratcheting
Background Pressurized components in nuclear applications that are subjected to cyclic loading may exhibit progressive deformation, so called structural ratcheting. If the component is made out of a material that are deformation hardening, it may also exhibit material ratcheting. The combined effects of structural- and material ratcheting are not taken into account in the methods and material...
Innehållstyp: Publikationer -
2014:21 Effects of additives on uranium dioxide fuel behavior
This report will form a basis for the reviews that SSM does when the license holders applies for use of nuclear fuel with additives. The report is also intended as a reference to the models that Quantum Technologies AB has developed. The report and the models will be a valuable source of information for SSM and other parties when discussing the performance of doped fuel. Ali Massih SSM...
Innehållstyp: Publikationer -
2010:06 Upphandling inom kärnkraftsindustrin, kvalitet, säkerhet och beslutsfattande
Upphandling av tjänster eller annan inhyrd personal eller utrustning såsom byggnadsdelar, komponenter, system är att betrakta som en del av den kärntekniska verksamheten och ska därmed omfattas av ledningssystemet med tillhörande nödvändiga instruktioner (Strålsäkerhetsmyndighetens föreskrifter om säkerhet i kärntekniska anläggningar,...
Innehållstyp: Publikationer -
2009:16 Influence of Hardening Model on Weld Residual Stress Distribution
Weld residual stresses have a large influence on the behavior of cracks growing under normal operation loads and on the leakage-flow from a through-wall crack. Accurate prediction of these events is important in order to arrive at proper conclusions when assessing detected flaws, for inspection planning and for assessment of leak-before-break margins. Therefore, it is very important to have...
Innehållstyp: Publikationer -
2009:17 Effect of Welding Residual Stresses on Crack Opening Displacement and Crack-Tip Parameters
Weld residual stresses have a large influence on the behavior of cracks growing under normal operation loads and on the leakage-flow from a through-wall crack. Accurate prediction of these events is important in order to arrive at proper conclusions when assessing detected flaws, for inspection planning and for assessment of leak-before-break margins. The fracture mechanical treatment of weld...
Innehållstyp: Publikationer -
2009:38 Research and Development Program in Reactor Diagnostics and Monitoring with Neutron Noise Methods, Stages 14 and 15
This report constitutes Stages 14 and 15 of a long-term research and development program concerning the development of diagnostics and monitoring methods for nuclear reactors. Stage 14 was a full one-year project, whereas Stage 15 consisted of a half-year project. Results up to Stage 13 were reported in SKI reports, as listed below and in the Summary. The results have also been published in...
Innehållstyp: Publikationer