Din avgränsning ger 571 träffar.
-
1995:15 Determination of the Neutron and Photon Dose Equivalent at Work Places in Nuclear Facilities of Sweden
The radiation fields in nuclear power plants consist of a mixture of photons and neutrons of various energies. A detector is usually constructed to respond to one type of radiation only and is usually useful in a limited energy range . .This is especially so for neutrons. Accurate descriptions of the radiation envirorunent are therefore very complicated to obtain. During the last decade great...
Innehållstyp: Publikationer -
1986:12 Chernobyl - its impact on Sweden
In case of a radiological emergency in Sweden, the Swedish National Institute of Radiation Protection (SSI) has the responsibility of organ1z1ng a special task force with experts both from SSI and from other authorities. Reports of increased radiation l evels reached SSI around 10 am on April 28, 1986, and the task force convened at 1030 am. A large number of measurements were made all over...
Innehållstyp: Publikationer -
2020:03 Extrautdelning och intag av jodtabletter för allmänheten i samband med en svensk kärnkraftsolycka
Sammanfattning Strålsäkerhetsmyndigheten (SSM) redovisar i denna rapport beräkningar av de högsta sköldkörteldoserna som barn och vuxna kan erhålla genom att andas in radioaktiv jod i samband med en svensk kärnkraftsolycka, samt avstånd där dessa doser kan uppstå givet att olika kombinationer av skyddsåtgärderna utrymning, inomhusvistelse...
Innehållstyp: Publikationer -
2020:13 Core data Research at Uppsala University
SSM perspective Background This project is to support a research group at Uppsala University in the research field of nuclear data for applications. Nuclear data research is about measuring microscopic cross-sections and developing theoretical nuclear models to create evaluated nuclear data libraries. These nuclear data libraries are used in different applications such as, nuclear technology,...
Innehållstyp: Publikationer -
2020:15 Strålskyddsåtgärder vid radiologiska nödsituationer
I den här rapporten redovisar Strålsäkerhetsmyndigheten (SSM) planeringsunderlag för strålskyddsåtgärder vid radiologiska nödsituationer i samband med händelser i beredskapskategori 4. Händelser i beredskapskategori 4 omfattar händelser i verksamheter med joniserande strålning som inte bedrivs på en bestämd plats samt antagonistiska...
Innehållstyp: Publikationer -
2020:02 Models for axial gas flow and mixing in LWR fuel rods
SSM perspective Background Fission gases inside a fuel rod plays an important role in the behaviour of the fuel, both during normal operation and during events and accidents. Fission gases are released from inside the fuel pellets to the gap between the pellet and the cladding tube and then flow to the plenum volume at the top of the fuel rod. In high burnup fuel, this axial flow to the...
Innehållstyp: Publikationer -
2020:05 General data in accordance with the requirements in Article 37 of the Euratom Treaty
Decommissioning of the nuclear reactors Ringhals 1 and Ringhals 2 in Sweden...
Innehållstyp: Publikationer -
2020:16 Estimates ofJ-integral and COD for circumferential through wall cracks under global bending including the effect of pipe end restraint
SSM perspective Background Leak-before-break (LBB) piping assessments have shown that piping systems can withstand long through-wall cracks before pipe rupture is expected. This is somewhat because pipe ends are restrained. In LBB assessments analyses are often performed for a pipe segment uncoupled from the piping system, as pipe ends are assumed unrestrained. This assumption is conservative...
Innehållstyp: Publikationer -
2021:04 Calibration of models for cladding tube high-temperature creep and rupture in the FRAPTRAN-QT-1.5 program
SSM perspective Background The Swedish Radiation Safety Authority (SSM) follows the research on fuel performance closely. One aspect that is currently being studied in several research projects is the risk of release of fragmented fuel into the primary coolant in case of an accident. This risk depends on complex conditions where one is the possibility and size of a rupture of the fuel rod...
Innehållstyp: Publikationer -
2021:09 Mechanisms important for material modelling in weld residual stress analysis
SSM perspective Background The prediction of weld residual stresses (WRS) is very complex as many mechanisms and phenomena influence the development of WRS during welding. For accurate prediction, the constitutive material models used are essential and must be able to describe the material response of the weldment constituents. For example, selection of a material model should only depend on...
Innehållstyp: Publikationer