Sök

Din avgränsning ger 738 träffar.

• 2015:46 Assessment of data and criteria for cladding burst in loss-of-coolant accidents

  Ali R. Massih, Lars Olof Jernkvist SSM English...

  Innehållstyp: Publikationer

• 2009:16 Influence of Hardening Model on Weld Residual Stress Distribution

  Weld residual stresses have a large influence on the behavior of cracks growing under normal operation loads and on the leakage-flow from a through-wall crack. Accurate prediction of these events is important in order to arrive at proper conclusions when assessing detected flaws, for inspection planning and for assessment of leak-before-break margins. Therefore, it is very important to have...

  Innehållstyp: Publikationer

• 2009:38 Research and Development Program in Reactor Diagnostics and Monitoring with Neutron Noise Methods, Stages 14 and 15

  This report constitutes Stages 14 and 15 of a long-term research and development program concerning the development of diagnostics and monitoring methods for nuclear reactors. Stage 14 was a full one-year project, whereas Stage 15 consisted of a half-year project. Results up to Stage 13 were reported in SKI reports, as listed below and in the Summary. The results have also been published in...

  Innehållstyp: Publikationer

• 2011:04 Evaluation of the Technical Basis for New Proposals of Fatigue Design of Nuclear Components

  During the recent years fatigue analysis procedures for nuclear components have been investigated. The most common method so far has been the American code ASME III. The basis for the current design procedures in ASME III is quite old and has now been evaluated against modern data leading to the proposal of modified design curves. Also the effect of the environment has been the subject of...

  Innehållstyp: Publikationer

• 2010:45 Evaluation of models for cyclic plastic deformation – A literature study

  Analysis of nuclear components subjected to cyclic plastic deformation is normally based on the American standard ASME III. With the focus to improve the modeling of the stress-strain response under non-monotonic loading, several models for the analysis of cyclic plastic deformation have been developed in recent years. However, experience shows that the analysis and evaluation of plastic...

  Innehållstyp: Publikationer

• Inneslutningen i en tryckvattenreaktor

  Reaktorinneslutningen är en av de säkerhetsbarriärer som skyddar omgivningen från radioaktiva utsläpp vid en olycka.

  Innehållstyp: Artiklar

• Kompletteringar (SFR)

  Här listas de kompletteringar som SKB gjort till ansökan enligt kärntekniklagen, daterad 19 december 2014, indelade per tillfälle då de skickades in.

  Innehållstyp: Artiklar

• Strålsäkerhetsmyndighetens svar på regeringens remisser

  Regeringen fattade beslut om att godkänna ett slutförvar för använt kärnbränsle i januari 2022. Strålsäkerhetsmyndigheten svarade på regeringens remisser 2019–2021 inför beslutet. ...

  Innehållstyp: Artiklar

• 2015:48 Technical Note, Supplementary review of SKB’s further RFI response

  Bakgrund Strålsäkerhetsmyndigheten (SSM) granskar Svensk Kärnbränslehantering AB:s (SKB) ansökningar enligt lagen (1984:3) om kärnteknisk verksamhet om uppförande, innehav och drift av ett slutförvar för använt kärnbränsle och av en inkapslingsanläggning. Som en del i granskningen ger SSM konsulter uppdrag för att inhämta...

  Innehållstyp: Publikationer

• 2015:25 Design Guide for Nuclear Civil Structures (DNB)

  The Swedish Radiation Safety Authority (SSM) and the Swedish licensees have previously in a jointly funded research project developed a design guide for civil structures at Swedish nuclear facilities to be based on Eurocodes, DNB. The report was published in January 2014 as SSM Report 2014:06. To further improve DNB and to ensure that the fundamentals of the recommendations will be applied...

  Innehållstyp: Publikationer