Din avgränsning ger 81 träffar.
-
2015:25 Design Guide for Nuclear Civil Structures (DNB)
The Swedish Radiation Safety Authority (SSM) and the Swedish licensees have previously in a jointly funded research project developed a design guide for civil structures at Swedish nuclear facilities to be based on Eurocodes, DNB. The report was published in January 2014 as SSM Report 2014:06. To further improve DNB and to ensure that the fundamentals of the recommendations will be applied...
Innehållstyp: Publikationer -
2013:28 Brine intrusion by upconing for a high-level nuclear waste repository at Forsmark. Scoping calculations
The objective of this study is to evaluate the possibility of salt-water migration to the spent nuclear repository. This objective is motivated by the adverse impacts of water with too high salinity entering the repository and by the uncertainty of the relevant hydraulic and hydrogeochemical conditions at the Forsmark site at great depths. To analyse density dependent flow and salt transport...
Innehållstyp: Publikationer -
2010:43 Displacement along extensive deformation zones at the two SKB sites: Forsmark and Laxemar
The Fennoscandian shield is distinguished by that the exposed bedrock is mainly composed of Precambrian metamorphic and igneous rocks older than a billion or one and a half billion years with few easily distinguished testimonies for the younger history. Large parts of the present ground surface closely coincides with a late Precambrian denudation surface; the sub-Cambrian peneplain.
Innehållstyp: Publikationer -
2011:09 Is Copper Immune to Corrosion When in Contact With Water and Aqueous Solutions?
The KBS-3concept implies that spent nuclear fuel is placed in copper canisters surrounded by clay and finally placed approximately 500 m down from surface into granitic bedrock, in order to isolate the spent nuclear fuel from humans and environment for very long time scales (i.e. millions of years). The concept is based on the multi-barrier principle, in this respect the barriers are the...
Innehållstyp: Publikationer -
2010:33 Lineament interpretation Short review and methodology
This report concerns a study which was initially conducted for the Swedish Nuclear Power Inspectorate (SKI), which is now merged into the Swedish Radiation Safety Authority (SSM). The conclusions and viewpoints presented in the report are those of the author and do not necessarily coincide with those of the SSM. In the characterization of a site that may have potential for hosting a...
Innehållstyp: Publikationer -
2011:08 Workshop on Copper Corrosion and Buffer Erosion Stockholm 15-17 September 2010
In SSM:s preparation for reviewing SKB:s license application for disposal of spent nuclear fuel, a series of technical workshops have been conducted. The main purpose of this type of workshops is to get an overall understanding of the state of knowledge on interdisciplinary issues as well as of questions in the research front by inviting several experts. Previous workshops have addressed the...
Innehållstyp: Publikationer -
2010:31 Buffer erosion: An overview of concepts and potential safety consequences
In its safety analysis SR-Can, SKB reported preliminary results and conclusions on the mechanisms of bentonite colloid formation and stability, with a rough estimate of the consequences of loss of bentonite buffer by erosion. With the review of SR-Can the authorities (SKI and SSI) commented that erosion of the buffer had the greatest safety significance, that the understanding of the...
Innehållstyp: Publikationer -
2011:34 Evolution of hydrogen by copper in ultrapure water without dissolved oxygen
One result from this research was that the experimental difficulties of repeating Hultqvist and co-workers work are considerable and were initially underestimated. The main challenge was to obtain satisfactory tightness of all connectors involved in the experimental set-up. The problems with leakage resulted in that the research program originally planned for in this project had to be reduced...
Innehållstyp: Publikationer -
2011:16 Modelling of ultrasonic testing of cracks in cladding
During the last two decades, SSM has supported research to develop a model for the non-destructive test situation based on ultrasonic technique. Such a model is important in many ways, for example to supplement and plan experimental studies and to perform parametric studies in qualification situation. Modeling can be a useful tool when the inspection system shall be technically justified.
Innehållstyp: Publikationer -
2011:13 Investigation of Discrete-Fracture Network Conceptual Model Uncertainty at Forsmark
Flow modelling using alternative assumptions regarding conceptual and parametric uncertainty in the spatial and structural relationships among fractures indicates elevated flow rates and groundwater velocities to deposition holes compared to SKB’s flow modelling results. Simulated sampling of fractures in boreholes does not indicate any reason to exclude the proposed spatial and structural...
Innehållstyp: Publikationer