Sök

Din avgränsning ger 18 träffar.

• 2011:07 Workshop on Regulatory Review and Safety Assessment Issues in Repository Licensing

  The Swedish Radiation safety Authority (SSM) is currently developing project plans for the review of the Swedish Nuclear Fuel and Waste Management Co’s (SKB) planned license application for a spent nuclear fuel repository in Forsmark and an encapsulation plant in Oskarshamn. In support of the development of these project plans, SSM has carried out several international workshops during 2010...

  Innehållstyp: Publikationer

• 2011:22 Infiltration of dilute groundwaters and resulting groundwater compositions at repository depth

  The planned Swedish concept for final disposal of spent nuclear fuel includes copper canisters placed in deposition holes at about 500 m depth in granitic bedrock. The copper canisters will be surrounded by bentonite buffer with the objective of inhibiting groundwater flow adjacent to the canister. It has been discovered that dilute glacial melt-water may induce erosion of the buffer material.

  Innehållstyp: Publikationer

• 2011:09 Is Copper Immune to Corrosion When in Contact With Water and Aqueous Solutions?

  The KBS-3concept implies that spent nuclear fuel is placed in copper canisters surrounded by clay and finally placed approximately 500 m down from surface into granitic bedrock, in order to isolate the spent nuclear fuel from humans and environment for very long time scales (i.e. millions of years). The concept is based on the multi-barrier principle, in this respect the barriers are the...

  Innehållstyp: Publikationer

• 2011:34 Evolution of hydrogen by copper in ultrapure water without dissolved oxygen

  One result from this research was that the experimental difficulties of repeating Hultqvist and co-workers work are considerable and were initially underestimated. The main challenge was to obtain satisfactory tightness of all connectors involved in the experimental set-up. The problems with leakage resulted in that the research program originally planned for in this project had to be reduced...

  Innehållstyp: Publikationer

• 2011:10e Review and evaluation of the Swedish Nuclear Fuel and Waste Management Company’s RD&D Programme 2010. Statement to the Government and summary of the review report

  In accordance with Section 25 of the Ordinance (1984:14) on Nuclear Activities (Nuclear Activities Ordinance), the Swedish Radiation Safety Authority (SSM) shall review and assess the research, development and demonstration programme (RD&D programme) that the reactor licensees are obligated to establish in accordance with the Act (1984:3) on Nuclear Activities (Nuclear Activities Act).

  Innehållstyp: Publikationer

• 2011:08 Workshop on Copper Corrosion and Buffer Erosion Stockholm 15-17 September 2010

  In SSM:s preparation for reviewing SKB:s license application for disposal of spent nuclear fuel, a series of technical workshops have been conducted. The main purpose of this type of workshops is to get an overall understanding of the state of knowledge on interdisciplinary issues as well as of questions in the research front by inviting several experts. Previous workshops have addressed the...

  Innehållstyp: Publikationer

• 2011:31 Allocation of Decommissioning and Waste Liabilities

  A crucial task for the present generations is to ensure that environmental liabilities are identified sufficiently well so that it may be possible to accumulate the corresponding necessary financial assets in the Swedish Nuclear Waste Fund. Adequate funding will provide forthcoming generation’s with the financial means to decommission and dismantle older nuclear facilities that are part of...

  Innehållstyp: Publikationer

• 2011:21 Workshop on spent fuel performance and radionuclide chemistry -Rånäs 2010: Assessment of some outstanding issues

  The safety assessment for final disposal of spent nuclear fuel has to comprehensively address the stage when containment barriers have failed and when radionuclide releases occur to the surrounding groundwater at repository depth. Essential processes for estimating risk/dose related to this scenario involve the release of radionuclide from the spent fuel surfaces due to radio-lytic oxidative...

  Innehållstyp: Publikationer

• 2011:16 Modelling of ultrasonic testing of cracks in cladding

  During the last two decades, SSM has supported research to develop a model for the non-destructive test situation based on ultrasonic technique. Such a model is important in many ways, for example to supplement and plan experimental studies and to perform parametric studies in qualification situation. Modeling can be a useful tool when the inspection system shall be technically justified.

  Innehållstyp: Publikationer

• 2011:13 Investigation of Discrete-Fracture Network Conceptual Model Uncertainty at Forsmark

  Flow modelling using alternative assumptions regarding conceptual and parametric uncertainty in the spatial and structural relationships among fractures indicates elevated flow rates and groundwater velocities to deposition holes compared to SKB’s flow modelling results. Simulated sampling of fractures in boreholes does not indicate any reason to exclude the proposed spatial and structural...

  Innehållstyp: Publikationer