Din avgränsning ger 378 träffar.
-
2018:05 Clab och inkapslingsanläggningen (Clink)
Beredning inför regeringens prövning Slutförvaring av använt kärnbränsle...
Innehållstyp: Publikationer -
1999:51 Kostnadsberäkning av diupförvaringav det använda kärnbränslet
Enligt finansieringslagen skall kärnkraftföretagen, i praktiken Svensk Kärnbränslehantering AB (SKB), årligen till Statens kärnkraftinspektion (SKI) lämna en beräkning över kostnaderna för att omhänderta det använda kärnbränslet och för avvecklingen och rivningen av kärnkraftverken. Efter att SKI granskat och värderat...
Innehållstyp: Publikationer -
1997:05 SKI SITE-94
The Swedish Industry program for deep geological disposal of spent nuclear fuel and high-level radioactive waste is now in the early stages of the site selection process, with feasibility studies underway in 5 to 10 municipalities. According to the Swedish Nuclear Fuel and Waste Management Co., SKB (SKB RD&D Programme, 1995), the ongoing siting process involves selection of two sites for...
Innehållstyp: Publikationer -
96:41 SKIs utvärdering av SKBs FUD-program 95
Sammanställning av remissvar...
Innehållstyp: Publikationer -
2003:19 Nuclear Waste Separation and Transmutation Research with Special Focus on Russian Transmutation Projects Sponsored by ISTC
Henri Condé, Waclaw Gudowski, Jan Blomgren, Jan-Olov Liljenzin, Nils Olsson, Curt Mileikovsky, Jan Wallenius. March 2003 SKI English...
Innehållstyp: Publikationer -
2011:16 Modelling of ultrasonic testing of cracks in cladding
During the last two decades, SSM has supported research to develop a model for the non-destructive test situation based on ultrasonic technique. Such a model is important in many ways, for example to supplement and plan experimental studies and to perform parametric studies in qualification situation. Modeling can be a useful tool when the inspection system shall be technically justified.
Innehållstyp: Publikationer -
2011:13 Investigation of Discrete-Fracture Network Conceptual Model Uncertainty at Forsmark
Flow modelling using alternative assumptions regarding conceptual and parametric uncertainty in the spatial and structural relationships among fractures indicates elevated flow rates and groundwater velocities to deposition holes compared to SKB’s flow modelling results. Simulated sampling of fractures in boreholes does not indicate any reason to exclude the proposed spatial and structural...
Innehållstyp: Publikationer -
2011:22 Infiltration of dilute groundwaters and resulting groundwater compositions at repository depth
The planned Swedish concept for final disposal of spent nuclear fuel includes copper canisters placed in deposition holes at about 500 m depth in granitic bedrock. The copper canisters will be surrounded by bentonite buffer with the objective of inhibiting groundwater flow adjacent to the canister. It has been discovered that dilute glacial melt-water may induce erosion of the buffer material.
Innehållstyp: Publikationer -
2011:09 Is Copper Immune to Corrosion When in Contact With Water and Aqueous Solutions?
The KBS-3concept implies that spent nuclear fuel is placed in copper canisters surrounded by clay and finally placed approximately 500 m down from surface into granitic bedrock, in order to isolate the spent nuclear fuel from humans and environment for very long time scales (i.e. millions of years). The concept is based on the multi-barrier principle, in this respect the barriers are the...
Innehållstyp: Publikationer -
2011:34 Evolution of hydrogen by copper in ultrapure water without dissolved oxygen
One result from this research was that the experimental difficulties of repeating Hultqvist and co-workers work are considerable and were initially underestimated. The main challenge was to obtain satisfactory tightness of all connectors involved in the experimental set-up. The problems with leakage resulted in that the research program originally planned for in this project had to be reduced...
Innehållstyp: Publikationer