Din avgränsning ger 64 träffar.
-
2014:08 Technical Note, Review of Long-Term Redox Evolution of Groundwater and Potential Influence of Oxygenated Glacial Meltwater in SR-Site
The Swedish Radiation Safety Authority (SSM) is reviewing an application submitted by the Swedish Nuclear Fuel and Waste Management Company (SKB) in 2011 to construct, possess, and operate a deep geologic repository for spent nuclear fuel at the Forsmark site in the municipality of Östhammar, Sweden. SKB has presented details of its long-term safety assessment, SR-Site, in a main report...
Innehållstyp: Publikationer -
2014:52 Beständiga förändringar av säkerhetskulturen
Projektet har genomförts dels som en litteraturstudie och dels som en intervjuserie vid svenska kärnkraftverk. Litteraturstudien resulterade i en beskrivning av viktiga komponenter inom området säkerhetskultur, faktorer som anses möjliggöra eller förhindra att en god säkerhetskultur uppnås samt metoder och arbetssätt för att utveckla och förbättra...
Innehållstyp: Publikationer -
2014:28 Numerical simulation of ductile crack growth in residual stress fields
The study has shown on the capability of the cell model in capturing the effects on ductile tearing from limited pre-load levels and a residual stress field. Some of the conclusions are as follows: No distinctive influence on the material fracture toughness is observed from pre-loading (work hardening), both tensile and compressive, at room temperature of 1.5 or 3 % total strain. The cell...
Innehållstyp: Publikationer -
2014:01 Cost Estimating for Decommissioning Nuclear Reactors in Sweden
In Sweden, decommissioning cost estimates are core inputs to the process of calculating licensee contributions to the Swedish national fund for radioactive waste management and decommissioning. Under the present system, the decommissioning cost estimates are produced by licensees every three years and formally submitted to the Swedish Radiation Safety Authority (SSM), which reviews the...
Innehållstyp: Publikationer -
2014:27 Regulation applying to welding of pressure equipment – a comparative study
The PED was in force in November 1999 and has been mandatory in European Union Member States since May 2002. Most of the standards referred to in the PED are relatively new although some of the standards were adopted in the early 1990s. On the other hand, the ASME B&PV Code has been used for a long time now and is the result of several decades of industrial experiences. The authors present...
Innehållstyp: Publikationer -
2014:18 Evaluation of the Halden IFA-650 loss-of-coolant accident experiments 2, 3 and 4
The analytical tools, which are fuel rod computer codes, that Quantum Technologies AB use and develop, contain models of several of the phenomena that are acting on the nuclear fuel (cladding temperature, fission gas driven pressure, strain and stress in the cladding, rod rupture, etc.) and how the separate effects interact in the complex integrated manner. The codes are under constant...
Innehållstyp: Publikationer -
Beställning av jämförelsemätning för radon i vatten
Taxa för analyser av prover: radon i vatten Ett (1) prov, gammamätning 3 750 kronor Flera prover (1-5 stycken), vätskescintillationsmätning 3 750 kronor Du behöver Adobe Acrobat Reader för att kunna läsa och fylla i PDF-blanketter. SSM Svenska Taxa för analyser av prover: radon i vatten Ett (1) prov, gammamätning 3 750 kronor Flera prover (1-5 stycken),...
Innehållstyp: Publikationer -
2014:54 Technical Note, Further Modelling Comparison of Simple Reference Biosphere Models with the LDF Modelling Approach – Main Review Phase
This Technical Note describes further use of simple reference biosphere models for SSM’s review of the Landscape Dose Factor (LDF) approach adopted by SKB in the SR‑Site safety assessment for the proposed final disposal of spent nuclear fuel at the Forsmark site. Simple biosphere models for the Forsmark site under temperate climate conditions were previously developed for SSM’s review and are...
Innehållstyp: Publikationer -
2014:58 Technical Note, Rock Mechanics - Assessing probability and extent of blind faults and fault-end growth around the KBS-3 repository at Forsmark – Main Review Phase
To get a general understanding of the stability conditions of the fault and deformation zone inventory at Forsmark a reactivation potential analysis was carried out. At present-day stress conditions the deformation zones are stable and show no large deformations or detected seismicity. Any changes in stress, and in particular increase of differential stress on deformation zones, might cause...
Innehållstyp: Publikationer -
2014:47 Technical Note, Assessment of groundwater salinity evolution at repository depth and especially the impact of dilute water infiltration
Groundwater compositions entering deposition holes in the repository will be progressively diluted over time because of expected changes of topographic and climatic conditions at Forsmark. This is a long-term safety issue because very dilute water could destabilise compacted bentonite and erode buffer, leading to advective movement of sulphide-containing water to the canister surface. SKB’s...
Innehållstyp: Publikationer
Gå till sida:
- Föregående sida
- Sida: 2
- Sida: 3
- Sida: 4
-
5 (nuvarande sida)
- Sida: 6
- Sida: 7
- Nästa sida