Sök

Din avgränsning ger 87 träffar.

• 2011:22 Infiltration of dilute groundwaters and resulting groundwater compositions at repository depth

  The planned Swedish concept for final disposal of spent nuclear fuel includes copper canisters placed in deposition holes at about 500 m depth in granitic bedrock. The copper canisters will be surrounded by bentonite buffer with the objective of inhibiting groundwater flow adjacent to the canister. It has been discovered that dilute glacial melt-water may induce erosion of the buffer material.

  Innehållstyp: Publikationer

• 2011:07 Workshop on Regulatory Review and Safety Assessment Issues in Repository Licensing

  The Swedish Radiation safety Authority (SSM) is currently developing project plans for the review of the Swedish Nuclear Fuel and Waste Management Co’s (SKB) planned license application for a spent nuclear fuel repository in Forsmark and an encapsulation plant in Oskarshamn. In support of the development of these project plans, SSM has carried out several international workshops during 2010...

  Innehållstyp: Publikationer

• Patienter får fel radiofarmaka

  Under 2011 har Strålsäkerhetsmyndigheten mottagit anmälningar från fyra sjukhus om missöden där patienter har administrerats fel radiofarmaka i samband med diagnostiska undersökningar. I samtliga fall har personalen missat någon av de kontroller som finns från beredning av radiofarmaka till administration. De inblandade hade olika lång erfarenhet...

  Innehållstyp: Artiklar

• 2011:10e Review and evaluation of the Swedish Nuclear Fuel and Waste Management Company’s RD&D Programme 2010. Statement to the Government and summary of the review report

  10 november 2011

  838 kB...

  Innehållstyp: Dokument

• 2011:13 Investigation of Discrete-Fracture Network Conceptual Model Uncertainty at Forsmark

  08 april 2011

  3825 kB...

  Innehållstyp: Dokument

• 2010:36 Guidance for the Definition and Application of Probabilistic Safety Criteria

  02 maj 2011

  3981 kB...

  Innehållstyp: Dokument

• 2011:33 Mathematical modelling of ultrasonic testing of components with defects close to a non-planar surface

  The report describes work that has been performed in order to model ultrasonic testing of components that contain a defect close to a non-planar surface. The studies have been performed in both 2D and 3D, and in 2D in both the anti-plane (SH) and the in-plane (P-SV). The results show that the presence of a non-planar back wall can reduce the detectability of defects close to the surface. The...

  Innehållstyp: Publikationer

• 2011:01 Bestämning av kontamination med radium-226 i radonkalibreringsanläggningen i Malå- Beslutsunderlag inför sanering och avveckling av anläggningen

  Radonkalibreringsanläggningen i Malå är kontaminerad med radium-226 (226Ra) som har läckt ut från de ursprungliga källorna. Saneringsåtgärder utfördes 1988, men aktivitet uppskattas finnas kvar på insidan av rörsystemet och på golvet i rummet. Eftersom anläggningen ska avvecklas är det viktigt att bestämma aktivitet i rörsystemet...

  Innehållstyp: Publikationer

• 2011:26 The influence of temperature and fluid pressure on the fracture network evolution around deposition holes of a KBS-3V concept at Forsmark, Sweden

  In preparation for the review of SKB’s license application for disposal of spent nuclear fuel, SSM is conducting studies to evaluate the performance of the multi-barrier principle on which the KBS-3 concept is based. Copper canisters containing the spent nuclear fuel are placed into granitic bedrock at about 500 m depth and embedded in clay. Thus, the rock, the clay and the copper canister...

  Innehållstyp: Publikationer

• 2011:19 Experimental evaluation of influence from residual stresses on crack initiation and ductile crack growth at high primary loads

  Cracked components are usually subjected to loads causing both primary and secondary stresses, e.g. welding components. Engineering assessment approaches, such as the ASME XI code and the R6 procedure, are commonly used to conduct integrity assessment of such components. There has been an ongoing debate how to treat secondary stresses using engineering assessment methods. The nature of these...

  Innehållstyp: Publikationer