Din avgränsning ger 302 träffar.
-
2011:16 Modelling of ultrasonic testing of cracks in cladding
During the last two decades, SSM has supported research to develop a model for the non-destructive test situation based on ultrasonic technique. Such a model is important in many ways, for example to supplement and plan experimental studies and to perform parametric studies in qualification situation. Modeling can be a useful tool when the inspection system shall be technically justified.
Innehållstyp: Publikationer -
2013:01 Validation of Weld Residual Stress Modeling in the NRC International Round Robin Study
Weld residual stresses (WRS) have a large influence on the behavior of cracks growing under normal operation loads and on the leakage flow from a through-wall crack. Accurate prediction on weld residual stresses is important to make proper decisions when cracks in weld joints are detected. During the latest years, there has been a strong development in both analytical procedures to...
Innehållstyp: Publikationer -
2011:30 A fatigue analysis including environmental effects for a pipe system in a Swedish BWR
The effect of the environment on fatigue design has been the subject of intense study in USA, Japan and elsewhere. Several reports indicate a potentially large influence of the environment, leading to the proposal of entirely new analysis procedures. SSM has in an earlier project sponsored research to evaluate the technical basis for these proposals, see SSM Research Report 2011:04. In the...
Innehållstyp: Publikationer -
2013:04 Research and Development Program in Reactor Diagnostics and Monitoring with Neutron Noise Methods, Stage 18
The program executed in Stage 18 consists of the following three parts: Application of CoreSim with a two-dimensional model of vibrating fuel assemblies, for the calculation of ex-core detector noise throughout a fuel cycle; An investigation of the neutron noise, induced by propagating perturbations, in various thermal and fast reactor systems, in two-group theory; A consistent derivation of...
Innehållstyp: Publikationer -
2016:35 Säkerhetsvärdering mot plastisk kollaps vid skadetålighetsanalyser
Bakgrund Proceduren som används för brottmekanisk analys av defekter och inspektionsintervall för komponenter i svenska kärntekniska anläggningar utgår från den brittiska R6-metoden men är vidareutvecklad för att ha ett säkerhetsvärderingssystem som är kompatibelt med säkerhetskraven som uttrycks i den amerikanska tryckkärlsstandarden...
Innehållstyp: Publikationer -
2016:29 Evaluation of the Swedish participation in the Halden Reactor Project 2006–2014
This is a report on the evaluation of the Swedish participation in the Halden Reactor Project 2006-2014. The study has consisted in evaluating the types and extent of added value from the Swedish participation in the Halden Reactor Project, and to determine what additional added value the participation could supply for the Swedish authority. It can be concluded from the study that the impacts...
Innehållstyp: Publikationer -
2016:39 Recommended residual stress profiles for stainless steel pipe welds
Background The Swedish Radiation Safety Authority (SSM) and the Swedish nuclear power plant owners have financed Inspecta Technology in Sweden to analyze stainless steel pipe welds to obtain good estimations of weld residual stress (WRS) distributions. Detailed knowledge of the residual stress field in different types of welds is important since they can have substantial influence on...
Innehållstyp: Publikationer -
2015:44 Krav på funktion, konstruktion och provning av reaktorinneslutningar
Bakgrund I Sverige behöver SSM skaffa vidare kunskap inom olika områden inom nukleära byggnadskonstruktioner bl.a. reaktorinneslutningar. Syfte Syftet med projektet "Krav på funktion, konstruktion och provning av reaktorinneslutningar" är att sammanställa information för att belysa viktiga reaktorinneslutningsfrågor vid byggnation. Den sammanställda...
Innehållstyp: Publikationer -
2015:11 Investigation of the Distribution of Phosphorus in Copper
Two copper alloys containing different amounts of phosphorus, 6 and 80 wtppm, respectively, have been investigated. The matrix of both alloys was analysed using atom probe tomography (APT). The matrix P concentration in the 80 wtppm P mate- rial was about the same as the bulk concentration and it was therefore concluded that the majority of the P atoms resides in the matrix. Grain boundaries...
Innehållstyp: Publikationer -
2015:07 TEM-lamella lift-out from the crack tip region of Alloy 600 for high resolution electron microscopy examination
This report contributes to the development of a method for high-quality TEM lamella preparation from crack tip regions of nuclear materials. A standard compact tension (CT) specimen of Alloy 600 previously tested for stress corrosion crack growth in simulated PWR primary water was used to demonstrate the benefit of the proposed method. This report describes the procedure for cutting the CT...
Innehållstyp: Publikationer