Sök

Din avgränsning ger 336 träffar.

• 2010:22 Research and Development Program in Reactor Diagnostics and Monitoring with Neutron Noise Methods, Stage 16

  This report constitutes Stage 16 of a long-term research and development program concerning the development of diagnostics and monitoring methods for nuclear reactors. Results up to Stage 15 were reported in SKI and SSM reports, as listed below and in the Summary. The results have also been published in international journals and have been included in both licentiate- and doctor’s degrees.

  Innehållstyp: Publikationer

• 1995:19 Non-destructive Assay of Spent BWR Fuel with High-resolution Gamma-ray Spectroscopy

  A method, based on high-resolution gamma-ray spectroscopy, has been developed for verification of burnup, cooling time, power history and, to some extent, the initial enrichment of spent BWR fuel. It is shown that, provided that the power history is known and corrected for, bumup and cooling time can be verified with accuracies within 3% and 60 days, respectively, for cooling times up to about...

  Innehållstyp: Publikationer

• 2007:33 Analys av mänsklig tillförlitlighet HRA-begreppets tillämpbarhet vid revisionsavställning

  Analyser av mänsklig tillförlitlighet, Human Reliability Analysis (HRA) har använts under en längre tid i kärnkraftverkens probabilistiska säkerhetsanalyser. SKI har nyligen genomfört en utredning om befintliga metoder inom området HRA (litteraturstudie) och hur dessa metoder används av tillståndshavarna för de svenska kärnkraftverken...

  Innehållstyp: Publikationer

• 2007:22 Safety Management An Introduction to a Frame of Reference Exemplified with Case Studies from Non-Nuclear Contexts

  A systems perspective has been applied on safety management that will be the foundation for the frame of reference the authors intend to build during the three-year long project. The case studies are presented and form illustrations of both high quality safety management and weaknesses of the safety management and take a look at information feedback about the risks of the systems. An...

  Innehållstyp: Publikationer

• 2007:05 Development of an Input Model to MELCOR 1.8.5 for Oskarshamn 3 BWR

  An input model has been prepared for the Oskarshamn 3 rector. Demonstrations calculations, at current nominal operating conditions in Oskarshamn 3 for 3300 MW thermal power, were performed for three cases: (1) initial, steady-state conditions, (2) total loss of AC power and (3) large steam line LOCA. The results are presented in the report. 200 Lars Nilsson SKI English An input model has been...

  Innehållstyp: Publikationer

• 2005:60 Research and Service Experience with Environmentally-Assisted Cracking in Carbon and Low-Alloy Steels in High-Temperature Water

  In this report, the most relevant aspects of research and service experience with environmentally assisted cracking of carbon and low-alloy steels in high-temperature water are reviewed, with special emphasis on the primary pressure-boundary components of boiling water reactors. The main factors controlling the susceptibility to environmentally assisted cracking under light water reactor...

  Innehållstyp: Publikationer

• 2009:33 Workshop on spent fuel performance, radionuclide chemistry and geosphere transport parameters, Lidingö 2008: Overview and evaluation of recent SKB procedures

  The safety assessment for disposal of spent nuclear fuel canister in the Swedish bedrock should thoroughly address the time period after a containment failure. Such a failure could be expected as a result of corrosion damage or mechanical failure due to rock movement. This report mainly covers some issues connected to parameters used for radionuclide transport calculations in the areas of...

  Innehållstyp: Publikationer

• 2010:25 Modelling Coupled Processes in the Evolution of Repository Engineered Barrier Systems using QPAC-EBS

  Currently in Sweden, the SR-Site safety assessment for a spent nuclear fuel repository is being developed by the Swedish Nuclear Fuel and Waste Management Company (SKB). The planned SSM review of this work requires access to a sufficient modelling capability to assess the combined performance of the engineered barriers (spent fuel canister, buffer and backfill) and the natural geosphere...

  Innehållstyp: Publikationer

• 2010:09 Copper Thermodynamics in the Repository Environment up to 130˚C

  The mechanisms of copper corrosion for a KBS-3 repository for spent nuclear fuel need to be known with a high level of confidence. This is because the overall rate of copper canister corrosion (accounting for corroding species concentrations, geochemical conditions and the mass transport through surrounding barriers) provides an essential performance indicator in safety assessment. A...

  Innehållstyp: Publikationer

• 2010:24 On Cost Estimate for Decommissioning of one Isotope Central

  The present generation has the responsibility to ensure and guarantee that sufficient financial resources are accrued into the Swedish Nuclear Waste Fund to cover all future costs. Thus, the next generation, as well as any succeeding generations, will have the financial resources required in order to undertake the necessary measures, in an appropriate manner, for the decommissioning and...

  Innehållstyp: Publikationer