Sök

Din avgränsning ger 496 träffar.

• 2008:32 Erfarenheter från International CCF Data Exchangeprojektet (ICDE), Rev 0

  Rapporten ger grundläggande information om common cause failure (CCF) konceptet och insikter från drifterfarenheter om inträffade CCF-händelser i säkerhetsrelaterade komponenter i såväl utländska som inhemska kärnkraftanläggningar. De drifterfarenheter som förmedlas i rapporten är avsedda att utgöra ett planeringshjälpmedel...

  Innehållstyp: Publikationer

• 2008:33 Risk-informed assessment of defence in depth, LOCA example

  The methods that are used today in PSA are applicable for evaluating defence-in-depth levels 1 and 2. Failure data can be determined through: human reliability analysis, riskinformed in-service-inspection methodology, system reliability analysis and directly from plant specific failure data for the components. Many DID activities against LOCA are not explicitly modelled in typical...

  Innehållstyp: Publikationer

• 2007:22 Safety Management An Introduction to a Frame of Reference Exemplified with Case Studies from Non-Nuclear Contexts

  A systems perspective has been applied on safety management that will be the foundation for the frame of reference the authors intend to build during the three-year long project. The case studies are presented and form illustrations of both high quality safety management and weaknesses of the safety management and take a look at information feedback about the risks of the systems. An...

  Innehållstyp: Publikationer

• 2007:05 Development of an Input Model to MELCOR 1.8.5 for Oskarshamn 3 BWR

  An input model has been prepared for the Oskarshamn 3 rector. Demonstrations calculations, at current nominal operating conditions in Oskarshamn 3 for 3300 MW thermal power, were performed for three cases: (1) initial, steady-state conditions, (2) total loss of AC power and (3) large steam line LOCA. The results are presented in the report. 200 Lars Nilsson SKI English An input model has been...

  Innehållstyp: Publikationer

• 2015:17 Kännetecken för välfungerande ledningssystem i säkerhetskritisk verksamhet

  Studien omfattar en litteraturgenomgång kring ledningssystem och dess komponenter samt en intervjuundersökning för att få synpunkter från ett antal utvalda personer med erfarenhet av att arbeta med ledningssystem på olika nivåer. Av resultaten framkommer att erfarenheter från stora olyckor ofta visar på brister i ledningssystemet och att fungerande...

  Innehållstyp: Publikationer

• 2015:11 Investigation of the Distribution of Phosphorus in Copper

  Two copper alloys containing different amounts of phosphorus, 6 and 80 wtppm, respectively, have been investigated. The matrix of both alloys was analysed using atom probe tomography (APT). The matrix P concentration in the 80 wtppm P mate- rial was about the same as the bulk concentration and it was therefore concluded that the majority of the P atoms resides in the matrix. Grain boundaries...

  Innehållstyp: Publikationer

• 2014:04 Global Non-proliferation ‘Clubs’ vs. the NPT

  The study analyses the relationship between the Nuclear Non-Proliferation Treaty, NPT and various initiatives and institutions (‘clubs’) based outside the NPT framework, which aims to improve and strengthen the Treaty. The study identifies conflicts and possible synergies and proposes options for developing and improving the interaction between the NPT and ‘clubs’ in order to increase the...

  Innehållstyp: Publikationer

• 2014:20 An evaluation of high-temperature creep of zirconium alloys: data versus models

  In this report Dr Massih presents correlations for creep in different phases of zirconium alloys and also presents a general solution to the difficulty of accurately describing the material properties in phase transition for several zirconium alloys. Based upon superplasticity relations, models are adapted to fit with experimental data for materials in transition regions. The creep models are...

  Innehållstyp: Publikationer

• 2015:07 TEM-lamella lift-out from the crack tip region of Alloy 600 for high resolution electron microscopy examination

  This report contributes to the development of a method for high-quality TEM lamella preparation from crack tip regions of nuclear materials. A standard compact tension (CT) specimen of Alloy 600 previously tested for stress corrosion crack growth in simulated PWR primary water was used to demonstrate the benefit of the proposed method. This report describes the procedure for cutting the CT...

  Innehållstyp: Publikationer

• 2015:43 Robust structural verification of pressurized nuclear components subjected to ratcheting

  Background Pressurized components in nuclear applications that are subjected to cyclic loading may exhibit progressive deformation, so called structural ratcheting. If the component is made out of a material that are deformation hardening, it may also exhibit material ratcheting. The combined effects of structural- and material ratcheting are not taken into account in the methods and material...

  Innehållstyp: Publikationer