Din avgränsning ger 478 träffar.
-
2011:12 Analysis of Barrier Performance: Modelling of Copper corrosion scenarios with and without buffer erosion
The purpose of this project was to develop a numerical modelling capacity to address the corrosion of the copper canister under gradually changing transport conditions caused by buffer erosion and removal of buffer mass. Due to the complexity of this task, such a model cannot be realistic in all respects, but the present effort should address the feasibility of solving numerical and...
Innehållstyp: Publikationer -
2010:34 The understanding of the formation of valleys and its implication on site characterization: Moredalen and Pukedalen, south-eastern Sweden
This report concerns a study which was initially conducted for the Swedish Nuclear Power Inspectorate (SKI), which is now merged into the Swedish Radiation Safety Authority (SSM). The conclusions and viewpoints presented in the report are those of the authors and do not necessarily coincide with those of the SSM. In south-eastern Sweden, there are a number of over-deepened narrow valleys,...
Innehållstyp: Publikationer -
2011:11 Handling Interfaces and Time-varying Properties in Radionuclide Transport Models
Quintessa’s QPAC code has been used to investigate the Qeq approach. The conclusions from this simulation study are the following. The basic approach to calculating Qeq values is sound, however, narrow channels could lead to the same release as larger fractures with the same pore velocity, so a channel enhancement factor of √10 should be considered. A spalling zone that increases the area of...
Innehållstyp: Publikationer -
2009:32 On Younger Stakeholders and Decommissioning of Nuclear Facilities
An appropriate balance in this regard must be based on a proper understanding of the values and value functions of younger citizens. Such information must thus be an integral part of the knowledge base to be used when plans and processes are being developed for dismantling and decommissioning of nuclear power plants and other older nuclear facilities. In the present project, empirical data...
Innehållstyp: Publikationer -
2007:12 Development of a constitutive model for the plastic deformation and creep of copper and its use in the estimate of the creep life of the copper canister
The copper-iron canister for disposal of nuclear waste in the Swedish Programme has a design life exceeding 100,000 years. Whilst the operating temperature and operating stress are modest, the very long design life does require that the likely creep performance of the canister should be investigated. Many studies have been carried out by SKB but these have all involved very short duration...
Innehållstyp: Publikationer -
2007:08 DECOVALEX-THMC - Task B
This report summarizes the work contributed to Phase 2 of Task B of the international DECOVALEX-THMC project, which took place during the period of March 2004 to May 2006. The Phase 2 work incorporated the use of a wide range of numerical models to simulate the failure of a number of intact rock core samples, from the APSE tunnel at Äspö HRL, as tested in uniaxial compression and other...
Innehållstyp: Publikationer -
2007:11 Review of Quality Assurance in SKBs Repository Research Experiments
SKB is preparing a license application for the construction of a final repository for spent nuclear fuel in Sweden. This application will be supported by the safety assessment SR-Site for the post-closure phase. As a preparation for SR-Site SKB has recently produced the SRCan safety assessment, which is currently in review. The assessment of long-term safety is based on a broad range of...
Innehållstyp: Publikationer -
2009:31 A Review of the Decommissioning Costs of the Ranstad Site
The main objective of this study has been to review the future cost to decommission and dismantling the industrial area at the site of the old uranium mine at Ranstad in Sweden. Analyses of some detailed comparative empirical information have been used in the context of preliminary “bench-marking” studies. The estimated costs for decommissioning of the old uranium mine in Ranstad have been...
Innehållstyp: Publikationer -
2018:18 Procedure for Safety Assessment of Components with Defects
– Handbook Edition 5...
Innehållstyp: Publikationer -
2017:29 Evaluation of the simulation software CIVA for qualification purpose
Background Modeling is an important tool within NDT, partly to develop and optimize testing technologies, but also within the Qualification Body’s activities to assess technical verifications and perform parameter studies. SSM has supported university research in the area for many years and, among other things, in the development of a software for ultrasound modeling. In addition, the...
Innehållstyp: Publikationer