Din avgränsning ger 491 träffar.
-
2012:70 Process Parameters Affecting Inhomogeneity of Material Microstructure
There’s been a tremendous change in the number, product types, locations, equipment, and manufacturing capabilities of stainless steel producers from the late 1960’s to present. This reconfiguration of the global steel industry occurred between the early 1970’s to the mid 1980’s and continues today. These changes have produced a loss in manufacturing flexibility, due to the inherent...
Innehållstyp: Publikationer -
2012:27 Mental arbetsbelastning En fallstudie från projektorganisationen på ett svenskt kärnkraftverk
Den genomförda studien har fokuserat på den personal som arbetar inom projektorganisationen och är en intervjustudie för att kartlägga den mentala arbetsbelastningen och de risker som finns relaterade till denna. Vidare har studien endast omfattat ett svenskt kärnkraftverk, som därmed får illustrera de faktorer som kan bidra och bidrar till den mentala arbetsbelastningen...
Innehållstyp: Publikationer -
2012:16 El och kontrollutrustning i kärnkraftverk. Problematik vid utbyte av åldrad utrustning
Studien visar på ett flertal områden som bör beaktas både hos tillståndshavarna och för framtida tillsynsstrategier för SSM. Flera av områdena har betydelse för säkerheten. Till exempel så framgår att konstruktionsprocessens efterlevnad och genomförande är mycket viktig för säkerheten. Genom att el- och kontrollutrustningen...
Innehållstyp: Publikationer -
2012:07 Implementation of the Master Curve method in ProSACC
Cleavage fracture toughness data display normally large amount of statistical scatter in the transition region. The cleavage toughness data in this region is specimen size-dependent, and should be treated statistically rather than deterministically. The Master Curve (MC) methodology is a procedure for mechanical testing and statistical analysis of fracture toughness of ferritic steels in the...
Innehållstyp: Publikationer -
2012:01 Kontrollrumskonstruktion – Samverkan mellan olika aktörer under konstruktion av nya och moderniserade kontrollrum
SSM har under senare år ställt högre krav på konstruktion och utformning av kärnkrafts-anläggningarna. Detta tillsammans med kärnkraftsindustrins uppgraderingar av effekten har medfört ett stort antal anläggningsändringar. En del av dessa anläggningsändringar har påverkan på kontrollrum och manöverutrustning samt på...
Innehållstyp: Publikationer -
2011:33 Mathematical modelling of ultrasonic testing of components with defects close to a non-planar surface
The report describes work that has been performed in order to model ultrasonic testing of components that contain a defect close to a non-planar surface. The studies have been performed in both 2D and 3D, and in 2D in both the anti-plane (SH) and the in-plane (P-SV). The results show that the presence of a non-planar back wall can reduce the detectability of defects close to the surface. The...
Innehållstyp: Publikationer -
2011:29 Research and Development Program in Reactor Diagnostics and Monitoring with Neutron Noise Methods, Stage 17
This report constitutes Stage 17 of a long-term research and development program concerning the development of diagnostics and monitoring methods for nuclear reactors. Results up to Stage 16 were reported in SKI and SSM reports, as listed below and in the Summary. The results have also been published in international journals and have been included in both licentiate- and doctor’s degrees.
Innehållstyp: Publikationer -
2011:19 Experimental evaluation of influence from residual stresses on crack initiation and ductile crack growth at high primary loads
Cracked components are usually subjected to loads causing both primary and secondary stresses, e.g. welding components. Engineering assessment approaches, such as the ASME XI code and the R6 procedure, are commonly used to conduct integrity assessment of such components. There has been an ongoing debate how to treat secondary stresses using engineering assessment methods. The nature of these...
Innehållstyp: Publikationer -
2011:17 Structural Health Monitoring of Piping in Nuclear Power Plants – A Review of Efficiency of Existing Methods
SSM needs to acquire knowledge about new applied Non-Destructive Engineering (NDE) techniques and their efficiency. One area that is discussed more frequently is Structural Health Monitoring (SHM). SSM needs to investigate the international experiences of SHM from the nuclear industry. SSM also wants to have more information about the capabilities and the limitations of NDE methods The first...
Innehållstyp: Publikationer -
2005:61 Review and Assessment of SCC Experiments with RPV Steels in Oskarshamn 2 and 3 (ABB Report SBR 99-020)
Although the extent of cracking was rather surprising for a bolt-loaded specimen, the average stress corrosion crack growth rate of 0.5 mm/year over the five-year testing period does not represent an immediate concern. The overwhelming part of crack growth can have occurred during a 20 day chloride transient during the third year of exposure because of a condenser leakage after an outage. The...
Innehållstyp: Publikationer