Sök

Din avgränsning ger 496 träffar.

• 2009:35 Evaluation of SKB/Posiva’s report on the horizontal alternative of the KBS-3 method

  The KBS-3 method, based on multiple barriers, is the proposed spent fuel disposal method both in Sweden and Finland. The method has two design alternatives: the vertical (KBS-3V) and the horizontal (KBS-3H). SKB and Posiva have conducted a joint research, development and demonstration (RD&D) programme in 2002-2007 with the overall aim of establishing whether the KBS-3H represents a...

  Innehållstyp: Publikationer

• 2018:22 Underlag till beredskapsplaneringen kring ESS

  Sammanfattning Nordost om Lund, i Brunnshögsområdet, byggs forskningsanläggningen European Spallation Source ERIC (ESS). När ESS tas i drift ska en linjäraccelerator leverera protoner till ett roterande strålmål av volfram, varpå neutroner produceras genom spallation. I strålmålet och i omkringliggande komponenter kommer radioaktiva ämnen...

  Innehållstyp: Publikationer

• 2018:09 Recent Research on EMF and Health Risk, Twelfth report from SSM's Scientific Council on Electromagnetic Fields, 2017

  Background The Swedish Radiation Safety Authority's (SSM) Scientific Council on Electromagnetic Fields monitors current research on potential health risks with a correlation to exposure to electromagnetic fields, and provides the Authority with advice on assessing possible health risks. The Council gives guidance when the Authority must give an opinion on policy matters when scientific testing...

  Innehållstyp: Publikationer

• 2018:25 UO2 fuel oxidation and fission gas release

  Background The Swedish Radiation Safety Authority (SSM) follows the research on fuel performance closely. One aspect that has been the main question of several research projects is the fragmentation of fuel pellets during abnormal heat up. In this project the oxidation of UO2 is scrutinized and its effect on pellet fragmentation, fission gas release and damage of fuel rods has been...

  Innehållstyp: Publikationer

• 2011:09 Is Copper Immune to Corrosion When in Contact With Water and Aqueous Solutions?

  The KBS-3concept implies that spent nuclear fuel is placed in copper canisters surrounded by clay and finally placed approximately 500 m down from surface into granitic bedrock, in order to isolate the spent nuclear fuel from humans and environment for very long time scales (i.e. millions of years). The concept is based on the multi-barrier principle, in this respect the barriers are the...

  Innehållstyp: Publikationer

• 2011:34 Evolution of hydrogen by copper in ultrapure water without dissolved oxygen

  One result from this research was that the experimental difficulties of repeating Hultqvist and co-workers work are considerable and were initially underestimated. The main challenge was to obtain satisfactory tightness of all connectors involved in the experimental set-up. The problems with leakage resulted in that the research program originally planned for in this project had to be reduced...

  Innehållstyp: Publikationer

• 2011:08 Workshop on Copper Corrosion and Buffer Erosion Stockholm 15-17 September 2010

  In SSM:s preparation for reviewing SKB:s license application for disposal of spent nuclear fuel, a series of technical workshops have been conducted. The main purpose of this type of workshops is to get an overall understanding of the state of knowledge on interdisciplinary issues as well as of questions in the research front by inviting several experts. Previous workshops have addressed the...

  Innehållstyp: Publikationer

• 2007:09 DECOVALEX-THMC - Task C

  This report describes the results of Task C1 of the international DECOVALEX– THMC project devoted to Excavation Damage Zone (EDZ) in argillaceous rock at the Tournemire site in France. Task C of the project is aimed to understand the physical phenomena induced by excavation in the argillaceous rock. The task is to develop adequate numerical models for interpretation of observed damaged zones...

  Innehållstyp: Publikationer

• 2007:07 DECOVALEX-THMC Project - Task A

  This report presents the definition of the first phase, Task A-1, of the Task A of the international DECOVALEX project. The task is a working example of how interaction between THMC modelling and SA analysis could be performed. Starting with the technical definition of the Task A, the report presents the results of preliminary THM calculations with a purpose of an initial appreciation of the...

  Innehållstyp: Publikationer

• 2007:10 DECOVALEX-THMC - Task D

  The DECOVALEX project is an international cooperative project initiated by SKI, the Swedish Nuclear Power Inspectorate, with participation of about 10 international organizations. The name DECOVALEX stands for DEvelopment of COupled models and their VALidation against Experiments. The general goal of this project is to encourage multidisciplinary interactive and cooperative research on...

  Innehållstyp: Publikationer