Din avgränsning ger 332 träffar.
-
2008:05 International Expert Review of SR-Can: Safety Assessment Methodology - External review contribution in support of SSI's and SKI's review of SR-Can
In 2006, SKB published a safety assessment (SR-Can) as part of its work to support a licence application for the construction of a final repository for spent nuclear fuel. The report represented the culmination of work conducted by SKB over several years, focusing on the goal of making the licence application in late 2009. Results from the SR-Can project have been documented in several...
Innehållstyp: Publikationer -
2008:08 SSI:s independent consequence calculations in support of the regulatory review of the SR-Can safety assessment
With the publication of the SR-Can report at the end of 2006, Swedish Nuclear Fuel and Waste Management Co (SKB) have presented a complete assessment of long-term safety for a KBS-3 repository. The SR-Can project demonstrates progress in SKB’s capabilities in respect of the methodology for assessment of long-term safety in support of a licence application for a final repository. According to...
Innehållstyp: Publikationer -
2008:09 The Generalised Ecosystem Modelling Approach in radiological assessment
An independent modelling capability is required by SSI in order to evaluate dose assessments carried out in Sweden by, amongst others, SKB. The main focus is the evaluation of the long-term radiological safety of radioactive waste repositories for both spent fuel and low-level radioactive waste. To meet the requirement for an independent modelling tool for use in biosphere dose assessments,...
Innehållstyp: Publikationer -
2008:10 User’s manual for Ecolego Toolbox and the Discretization Block
The CLIMB modelling team (Catchment LInked Models of radiological effects in the Biosphere) was instituted in 2004 to provide SSI with an independent modelling capability when reviewing SKB’s assessment of long-term safety for a geological repository. Modelling in CLIMB covers all aspects of performance assessment (PA) from near-field releases to radiological consequences in the surface...
Innehållstyp: Publikationer -
2020:16 Estimates ofJ-integral and COD for circumferential through wall cracks under global bending including the effect of pipe end restraint
SSM perspective Background Leak-before-break (LBB) piping assessments have shown that piping systems can withstand long through-wall cracks before pipe rupture is expected. This is somewhat because pipe ends are restrained. In LBB assessments analyses are often performed for a pipe segment uncoupled from the piping system, as pipe ends are assumed unrestrained. This assumption is conservative...
Innehållstyp: Publikationer -
2020:02 Models for axial gas flow and mixing in LWR fuel rods
SSM perspective Background Fission gases inside a fuel rod plays an important role in the behaviour of the fuel, both during normal operation and during events and accidents. Fission gases are released from inside the fuel pellets to the gap between the pellet and the cladding tube and then flow to the plenum volume at the top of the fuel rod. In high burnup fuel, this axial flow to the...
Innehållstyp: Publikationer -
2022:09 Assessment of modelling approaches for axial gas flow inside LWR fuel rods
SSM perspective Background The fuel rod analysis program SCANAIR has been developed by IRSN (Institut de Radioprotection et de Sûreté Nucléaire) for analysis of reactivity initiated accidents (RIA) in light water reactors. The Swedish Radiation Safety Authority (SSM) has access to SCANAIR in exchange for annual contributions for its further development. The development and administration...
Innehållstyp: Publikationer -
2022:11 Kingdom of Sweden IRRS ARM Summary Report 2022
The IAEA Integrated Regulatory Review Service Mission to Sweden in November 2022...
Innehållstyp: Publikationer -
2022:14 Weld residual stress and strain measurements on a mock-up with single layer strip cladding common in reactor pressure vessels
SSM perspektiv Bakgrund Reaktortryckkärl tillverkas vanligtvis av låglegerade ferritiska stål som på insidan beläggs med ett eller flera lager av rostfritt stål, så kallad plätering eller på engelska cladding. Den rostfria pläteringen påverkar den strukturella integriteten på flera sätt, dels har pläteringen annorlunda materialegenskaper...
Innehållstyp: Publikationer -
2022:17 Spricktillväxtmätning i tryckkärlsstål med mellanhög svavelhalt och kloridtransienter
SSM perspektiv Bakgrund De svenska kokvattenreaktorerna av internpumpstyp körs alla med normalvattenkemi. I laboratorieförsök har en tydlig känslighet för spänningskorrosion i låglegerat tryckkärlsstål vid normalvattenkemi och förhöjd svavelhalt i materialet eller sulfat/kloridkontamination i vattnet kunnat påvisas. På...
Innehållstyp: Publikationer