Din avgränsning ger 335 träffar.
-
2006:36 Mechanical Integrity of Canisters Using a Fracture Mechanics Approach
This report presents the methods and results of a research project for Swedish Nuclear Power Inspectorate (SKI) about numerical modeling of mechanical integrity of cast-iron canisters for the final disposal of spent nuclear fuel in Sweden, using combined boundary element (BEM) and finite element (FEM) methods The objectives of the project are: 1) to investigate the possibility of initiation...
Innehållstyp: Publikationer -
1997:40 Aging of Electrical Components in Nuclear Power Plants
The purpose of the study reported in SKl Technical Report 93:39 was to evaluate qualification methods for application to components intended to be installed in the containment of nuclear power plants. The study included application of Arrhenius' criterion for thermal aging as well as methodologies for updating (curve-matching, ongoing qualification). This report reviews the results of...
Innehållstyp: Publikationer -
1997:12 Study of International Published Experiences in Joining Copper and Copper-alloys
This study has revealed a number of joining processes to be used when manufacturing copper-canisters for the final storage of high level nuclear waste. However, the decision on which material and which joining process to be used has to be based on the design criterions. The welding procedure has to be qualified i.e, it shall be demonstrated whether the procedure is capable of fulfilling...
Innehållstyp: Publikationer -
96:40 Status and Use of PSA in Sweden
The performance and use of PSA:s in Sweden goes back about two decades. During all of this time, the field of PSA has been developing intensively, both internationally and within Sweden. The latest years have been characterised by an increased use of PSA models and results, and by major extensions of existing PSA models. The aim of this document is to describe PSA in Sweden with respect to...
Innehållstyp: Publikationer -
1995:72 Kopparkorrosion i rent syrefritt vatten
Kopparkorrosion i rent vatten har studerats. Undersökningen är bl a föranledd av artiklar publicerade i Corrosion Science. I dessa artiklar presenterades resultat som visar att koppar kan korrodera i rent vatten i frånvaro av löst syrgas. Koppar oxideras i stället direkt av vattnet under bildning av vätgas. Kvartsprovrör innehållande rent vatten och...
Innehållstyp: Publikationer -
2013:07 Corrosion of copper in distilled water without molecular oxygen and the detection of produced hydrogen
In this report, results are presented for copper which has been exposed to pure anoxic water in the temperature interval of 21 °C to 55 °C up to a total of 19 000 hours. Characterisations of copper surfaces after exposure have been performed ex-situ, meaning after termination of the experiment and exposing the specimen to normal atmospheric environment. Ideally characterisation of surfaces...
Innehållstyp: Publikationer -
2012:11 Issues in the corrosion of copper in a Swedish high level nuclear waste repository
The objective with this research project was to increase knowledge in the area of copper corrosion in the planned repository environment and obtain information on how copper corrosion evolves during the assessment period of 100 000 years. The equilibrium chemical composition of groundwater close to the canister as a function of temperature has been calculated by use of a thermodynamics code...
Innehållstyp: Publikationer -
2011:26 The influence of temperature and fluid pressure on the fracture network evolution around deposition holes of a KBS-3V concept at Forsmark, Sweden
In preparation for the review of SKB’s license application for disposal of spent nuclear fuel, SSM is conducting studies to evaluate the performance of the multi-barrier principle on which the KBS-3 concept is based. Copper canisters containing the spent nuclear fuel are placed into granitic bedrock at about 500 m depth and embedded in clay. Thus, the rock, the clay and the copper canister...
Innehållstyp: Publikationer -
2011:12 Analysis of Barrier Performance: Modelling of Copper corrosion scenarios with and without buffer erosion
The purpose of this project was to develop a numerical modelling capacity to address the corrosion of the copper canister under gradually changing transport conditions caused by buffer erosion and removal of buffer mass. Due to the complexity of this task, such a model cannot be realistic in all respects, but the present effort should address the feasibility of solving numerical and...
Innehållstyp: Publikationer -
2011:11 Handling Interfaces and Time-varying Properties in Radionuclide Transport Models
Quintessa’s QPAC code has been used to investigate the Qeq approach. The conclusions from this simulation study are the following. The basic approach to calculating Qeq values is sound, however, narrow channels could lead to the same release as larger fractures with the same pore velocity, so a channel enhancement factor of √10 should be considered. A spalling zone that increases the area of...
Innehållstyp: Publikationer