Din avgränsning ger 332 träffar.
-
2009:30 A Review of Evidence for Corrosion of Copper by water
The planned spent nuclear fuel repository in Sweden relies on a copper cast iron canister as the primary engineered barrier. The corrosion behaviour of copper in the expected environment needs to be thoroughly understood as a basis for the post-closure safety analysis. It has been shown that corrosion may indeed be the primary canister degradation process during the utilised assessment period...
Innehållstyp: Publikationer -
2009:22 Alternative modelling of brittle structures in a sub-area of the SKB candidate area at Forsmark, eastern Sweden
A reasonable understanding of the character of the bedrock hosting a deep geological repository, i.e. the natural barrier, is an important component in the safety assessment of the deep geological repository for spent nuclear fuel. The structures in the rock, together with the regional stress field, affect the mechanical stability of the bedrock and the ground water transport within the...
Innehållstyp: Publikationer -
2020:07 Fibre Clogging in Nuclear Power Plants
SSM perspective Background Emergency core cooling systems in boiling- and pressurized water reactors use strainers. Their purpose is to out foreign material suspended in the cooling water so this material does not reach the reactor. After the 1992 event at Barsebäck nuclear power plant when the strainers of the emergency cooling system was clogged due to fibers in the cooling water, all...
Innehållstyp: Publikationer -
1999:13 Determination of the Neutron and Photon Dose Equivalent at Work Places in Nuclear Facilities of Sweden
Various mixed neutron-photon fields at workplaccs in the containment of pressurised water reactors and in the vicinity of transport containers with spent fuel elements were investigated with spectrometers and dosimeters.The spectral neutron fluences evaluated from measurements with multisphere systems were recommended to be used for the calculation of dosimetric reference values for...
Innehållstyp: Publikationer -
2019:15 3D Thermo-Mechanical Coupled Modelling of Thermo-Seismic Response of a Fractured Rock Mass related to the Final Disposal of Spent Nuclear Fuel and Nuclear Waste in Hard Rock
SSM perspective Background When assessing the long-term safety of a repository for spent nuclear fuel it is important to consider future earthquakes. Previous studies by Yoon et al. (2014, SSM Report 2014:59) and (2016, SSM Report 2016:23) investigated the fracture responses due to heat and earthquakes at major deformation zones using a 2D thermo-mechanical coupled model that uses a Particle...
Innehållstyp: Publikationer -
2010:46 Development of the PRO-LOCA Probabilistic Fracture Mechanics Code, MERIT Final Report
The MERIT project has been an internationally financed program with the main purpose of developing probabilistic models for piping failure of nuclear components and to include these models in a probabilistic code named PRO-LOCA. The principal objective of the project has been to develop probabilistic models for piping failure of nuclear components and to include these models in a...
Innehållstyp: Publikationer -
2016:37 PARTRIDGE project: Review and evaluation of the probabilistic fracture mechanics code PRO-LOCA
Background The Swedish Radiation Safety Authority (SSM) and the Swedish nuclear power plant owners have financed Inspecta Technology in Sweden to evaluate the PRO-LOCA code. It is a computer code, developed by Battelle in the USA, in which the leak- and rupture probabilities of piping in nuclear power plants are analysed. The pipe systems may contain the damage mechanisms fatigue and/or...
Innehållstyp: Publikationer -
2014:28 Numerical simulation of ductile crack growth in residual stress fields
The study has shown on the capability of the cell model in capturing the effects on ductile tearing from limited pre-load levels and a residual stress field. Some of the conclusions are as follows: No distinctive influence on the material fracture toughness is observed from pre-loading (work hardening), both tensile and compressive, at room temperature of 1.5 or 3 % total strain. The cell...
Innehållstyp: Publikationer -
2016:31 Measures and method characteristics for early evaluation of safe operation in nuclear power plant control room systems
The Swedish Radiation Safety Authority’s (SSM) experience is that there is a need to develop evaluation methods in parallel with the development of control rooms in conjunction with construction modifications and other changes. This includes more indepth analysis of the methods used today. Another aspect is that conventional methods of evaluating control rooms and issues need to be...
Innehållstyp: Publikationer -
2015:10 SafePhase: Safety culture challenges in design, construction, installation and commissioning phases of large nuclear power projects
Different lifecycle phases of a nuclear power plant present new human-technology- organization challenges to regulators and licensees. Organizational processes and practices that have evolved in one phase of development might be dysfunctional for the next phase, and the definition of “good safety culture” in practice might be unclear. The objective of the SafePhase study is to improve the...
Innehållstyp: Publikationer