Din avgränsning ger 754 träffar.
-
2012:07 Implementation of the Master Curve method in ProSACC
Cleavage fracture toughness data display normally large amount of statistical scatter in the transition region. The cleavage toughness data in this region is specimen size-dependent, and should be treated statistically rather than deterministically. The Master Curve (MC) methodology is a procedure for mechanical testing and statistical analysis of fracture toughness of ferritic steels in the...
Innehållstyp: Publikationer -
2012:03 The IAEA Integrated Regulatory Review Service Mission to Sweden in February 2012
The Swedish Government decided on January 22, 2009 to mandate the Swedish Radiation Safety Authority, SSM, to apply for an international review of the Author-ity and its areas of supervision, an ‘IRRS’ (Integrated Regulatory Review Service) carried out by the International Atomic Energy Agency (IAEA). On February 25, 2009, SSM made a formal request to the IAEA for an IRRS in Sweden. The time...
Innehållstyp: Publikationer -
2011:33 Mathematical modelling of ultrasonic testing of components with defects close to a non-planar surface
The report describes work that has been performed in order to model ultrasonic testing of components that contain a defect close to a non-planar surface. The studies have been performed in both 2D and 3D, and in 2D in both the anti-plane (SH) and the in-plane (P-SV). The results show that the presence of a non-planar back wall can reduce the detectability of defects close to the surface. The...
Innehållstyp: Publikationer -
2011:18 Strålsäkerhetsläget vid de svenska kärnkraftverken 2010
Enligt Strålsäkerhetsmyndighetens (SSM:s) regleringsbrev ska myndigheten senast den 31 maj 2011 till regeringen redovisa strålsäkerhetsläget vid de svenska kärnkraftverken. Föreliggande rapport utgör denna redovisning. 100 SSM SSM Svenska Enligt Strålsäkerhetsmyndighetens (SSM:s) regleringsbrev ska myndigheten senast den 31 maj 2011 till regeringen...
Innehållstyp: Publikationer -
2014:54 Technical Note, Further Modelling Comparison of Simple Reference Biosphere Models with the LDF Modelling Approach – Main Review Phase
This Technical Note describes further use of simple reference biosphere models for SSM’s review of the Landscape Dose Factor (LDF) approach adopted by SKB in the SR‑Site safety assessment for the proposed final disposal of spent nuclear fuel at the Forsmark site. Simple biosphere models for the Forsmark site under temperate climate conditions were previously developed for SSM’s review and are...
Innehållstyp: Publikationer -
2014:58 Technical Note, Rock Mechanics - Assessing probability and extent of blind faults and fault-end growth around the KBS-3 repository at Forsmark – Main Review Phase
To get a general understanding of the stability conditions of the fault and deformation zone inventory at Forsmark a reactivation potential analysis was carried out. At present-day stress conditions the deformation zones are stable and show no large deformations or detected seismicity. Any changes in stress, and in particular increase of differential stress on deformation zones, might cause...
Innehållstyp: Publikationer -
2014:55 Technical Note, Further Reproduction of SKB’s Calculation Cases and Independent
Som en del av säkerhetsanalysen SR-Site presenterar SKB modellresultat som illustrerar kapseln och buffertens säkerhetsfunktioner. I var och en av de fem beräkningsfallen är delar av kapsel och/eller buffert frånvarande i modellen av slutförvarssystemet. Modellresultaten jämförs inte med säkerhetskriterier eftersom beräkningsfallen innehåller...
Innehållstyp: Publikationer -
2015:05 Technical Note, Review of uncertainty propagation and sensitivity analysis in SR-Site Main Review Phase
The review assignment SSM2014-2060 “Review of uncertainty and sensi- tivity analysis in SR-Site” addressed three issues: Adequacy of the methods adopted by SKB for conducting sensitivity analyses Approach for use of conservative and best-estimate parameter values Propagation of uncertainty for the corrosion scenario Adequacy of the methods for sensitivity analyses: The sensitivity analyses...
Innehållstyp: Publikationer -
2014:59 Technical Note, Relation between earthquake magnitude, fracture length and fracture shear displacement in the KBS-3 repository at Forsmark – Main Review Phase
This study addresses one of several scenarios that could impair the physical integrity of the repository of spent nuclear fuel at the Forsmark site. Two sources of threat are: i) events due to thermal loading on the rock mass by the heat from canisters with spent nuclear fuel, and ii) seismic events, i.e. earthquakes, at the nearby deformation zones and zones intersecting the repository area.
Innehållstyp: Publikationer -
2015:01 Technical Note, Rock Mechanics - Thermal properties and thermal modelling of the rock in a repository of spent nuclear fuel at Forsmark – Main Review Phase
In preparation for the review of SKB's license application for a disposal of spent nuclear fuel, SSM has conducted a series of modelling studies related to the design, construction and long-term safety of a repository at Forsmark. Several of the presented modelling works are related to the thermal evolution of the repository with time. This report extracts the results from independent SSM...
Innehållstyp: Publikationer