Sök

Din avgränsning ger 45 träffar.

• 2014:32 Technical Note, Assessment of the derivation and use of distribution coefficients and concentration ratios – Main Review Phase

  This report presents a review of the approaches and databases which SKB have used to derive concentration ratios (CRs) and distribution coefficients (Kds) to consider if they are robustly derived and fit for purpose. Credible alternative approaches are also considered. The focus of this review are SKB reports R-10-28 and TR-10-07 which describe the available site specific data and the...

  Innehållstyp: Publikationer

• 2014:29 Technical Note, Independent Modelling of Radionuclide Transport, Evaluation of Colloid Transport Modelling – Main Review Phase

  SKB excludes consideration of colloids originating inside the canister in its performance assessment on the basis of the filtration capability of the buffer material. In the canister failure by corrosion scenario (central corrosion case), the buffer material is assumed eroded, and the filtration argument is not entirely valid for excluding modelling in-canister colloids. In this Technical...

  Innehållstyp: Publikationer

• 2014:34 Technical Note, Modelling Comparison of Simple Reference Biosphere Models with LDF Models – Main Review Phase

  This Technical Note describes the development of simple reference biosphere models as a means of exploring the Landscape Dose Factor (LDF) approach adopted by SKB in the SR-Site safety assessment for the proposed final disposal of spent nuclear fuel at the Forsmark site. The models are developed and described in a systematic manner, based on international guidance reflected in the...

  Innehållstyp: Publikationer

• 2014:28 Numerical simulation of ductile crack growth in residual stress fields

  The study has shown on the capability of the cell model in capturing the effects on ductile tearing from limited pre-load levels and a residual stress field. Some of the conclusions are as follows: No distinctive influence on the material fracture toughness is observed from pre-loading (work hardening), both tensile and compressive, at room temperature of 1.5 or 3 % total strain. The cell...

  Innehållstyp: Publikationer

• 2014:18 Evaluation of the Halden IFA-650 loss-of-coolant accident experiments 2, 3 and 4

  The analytical tools, which are fuel rod computer codes, that Quantum Technologies AB use and develop, contain models of several of the phenomena that are acting on the nuclear fuel (cladding temperature, fission gas driven pressure, strain and stress in the cladding, rod rupture, etc.) and how the separate effects interact in the complex integrated manner. The codes are under constant...

  Innehållstyp: Publikationer