Din avgränsning ger 724 träffar.
-
2015:03 Brottmekaniska K-lösningar för sprickor i massiv stång med icke-linjärt rotationssymmetriskt spänningstillstånd
Nya K-lösningar är framtagna för 0,0 ≤ a/R ≤ 1,0 och 0,0 ≤ a/b ≤ 1,0 där a är sprickdjupet, b är spricklängdsparameter och R är stångens radie. Lösningarna inkluderar utöver global membranlast och böjlast även rotationssymmetriska spänningsfält upp till och med femte ordningen. Anpassning av ett andragradspolynom utmed...
Innehållstyp: Publikationer -
2015:20 The effects of mild, acute hypoxia on cognitive performance
Room air with reduced oxygen levels that prevent materials to ignite and combust is a cost-effective and increasingly popular fire prevention method. For system safety reasons, the effects of hypoxia, that is, the lack of sufficient oxygen (that is, less than 21% oxygen which is the approximate oxygen level of normal air), on cognitive performance of persons working under such conditions are...
Innehållstyp: Publikationer -
2018:26 Reaktorinneslutningarnas respons vid höga inre tryck och reducerad förspänning
I föreliggande studie har det genom numerisk modellering undersökts huruvida tillämpning av alternativ B enligt Regulatory Guide 1.90 (R.G. 1.90) är ett tillförlitligt sätt att bedöma reaktorinneslutningens integritet. Vid genomförandet har två olika numeriska modeller använts, en global 3D-modell respektive en ringmodell. Resultaten pekar på...
Innehållstyp: Publikationer -
2018:12 Upparbetning av använt kärnbränsle med icke-vätskebaserade metoder
Bakgrund Sverige har en exportlagstiftning för kontroll av utförsel av speciellt känslig utrustning som kan användas för bl.a. tillverkning av kärnvapen. Syftet är att förhindra att någon stat eller organisation införskaffar sådana vapen. Utrustningen det är frågan om har ofta en legitim användning i civil industri men kan ha...
Innehållstyp: Publikationer -
2018:24 Structural equation modelling for analysis of human and organizational factors in nuclear power plant control rooms
SSM perspective Background During the supervisory work of the Swedish Radiation Safety Authority (SSM), a need was identified to develop the methods used when evaluating control room work in the central control rooms of nuclear power plants. Benchmarking is commonly used today, with reference values from earlier Integrated System Validation (ISV), when ISV is available. Often, ISV performs...
Innehållstyp: Publikationer -
2014:28 Numerical simulation of ductile crack growth in residual stress fields
The study has shown on the capability of the cell model in capturing the effects on ductile tearing from limited pre-load levels and a residual stress field. Some of the conclusions are as follows: No distinctive influence on the material fracture toughness is observed from pre-loading (work hardening), both tensile and compressive, at room temperature of 1.5 or 3 % total strain. The cell...
Innehållstyp: Publikationer -
2014:18 Evaluation of the Halden IFA-650 loss-of-coolant accident experiments 2, 3 and 4
The analytical tools, which are fuel rod computer codes, that Quantum Technologies AB use and develop, contain models of several of the phenomena that are acting on the nuclear fuel (cladding temperature, fission gas driven pressure, strain and stress in the cladding, rod rupture, etc.) and how the separate effects interact in the complex integrated manner. The codes are under constant...
Innehållstyp: Publikationer -
2014:35 Technical Note, Modelling comparison of alternative biosphere models with LDF models and evaluation of selected parameter values used in the biosphere dose assessment - Main review phase
This report has been prepared as part of the SSM’s Main Review Phase of SKB’s SR-Site performance assessment of the long-term safety of the KBS-3 geological disposal facility (GDF) proposed for construction at Forsmark. The review addresses the methodology employed in the dose assessment calculations of SR-Site; specifically issues of transport, accumulation and transfers of radionuclides in...
Innehållstyp: Publikationer -
2014:43 Technical Note, Workshop on general corrosion of copper
This report describes the outcome of the workshop organized by SSM on general corrosion of copper that was held in Stockholm on the 26-27th of August, 2013. The report summarizes the issues discussed and extracts the essential viewpoints that have been expressed. It should not be considered as a comprehensive record of all the discussions at the workshop and individual statements made by...
Innehållstyp: Publikationer -
2014:32 Technical Note, Assessment of the derivation and use of distribution coefficients and concentration ratios – Main Review Phase
This report presents a review of the approaches and databases which SKB have used to derive concentration ratios (CRs) and distribution coefficients (Kds) to consider if they are robustly derived and fit for purpose. Credible alternative approaches are also considered. The focus of this review are SKB reports R-10-28 and TR-10-07 which describe the available site specific data and the...
Innehållstyp: Publikationer