Sök

Din avgränsning ger 83 träffar.

• 2011:09 Is Copper Immune to Corrosion When in Contact With Water and Aqueous Solutions?

  The KBS-3concept implies that spent nuclear fuel is placed in copper canisters surrounded by clay and finally placed approximately 500 m down from surface into granitic bedrock, in order to isolate the spent nuclear fuel from humans and environment for very long time scales (i.e. millions of years). The concept is based on the multi-barrier principle, in this respect the barriers are the...

  Innehållstyp: Publikationer

• 2011:08 Workshop on Copper Corrosion and Buffer Erosion Stockholm 15-17 September 2010

  In SSM:s preparation for reviewing SKB:s license application for disposal of spent nuclear fuel, a series of technical workshops have been conducted. The main purpose of this type of workshops is to get an overall understanding of the state of knowledge on interdisciplinary issues as well as of questions in the research front by inviting several experts. Previous workshops have addressed the...

  Innehållstyp: Publikationer

• 2018:21 Research on Resaturation of Bentonite Buffer

  Background Resaturation processes in the bentonite buffer in a KBS-3 type repository for spent nuclear fuel are complicated and are often illustrated, analysed and modelled multi-disciplinarily as coupled thermal (T), hydrological (H) and mechanical (M) processes with multi-phase flow, elastoplastic evolution in a swelling porous medium. Previous THM-modelling showed that the re-saturation...

  Innehållstyp: Publikationer

• 2012:61 Geochemical Constraints on Buffer Pore Water Evolution and Implications for Erosion

  Mineralogical data from the Forsmark Site show that smectite and calcite occur at all depths in Forsmark fractures, with no evidence for removal/dissolution by previous glacial episodes. This natural analogue information implies that these minerals may not have been eroded/dissolved during previous glacial episodes. Available thermodynamic data suggest that repository-depth Forsmark...

  Innehållstyp: Publikationer

• 2011:34 Evolution of hydrogen by copper in ultrapure water without dissolved oxygen

  One result from this research was that the experimental difficulties of repeating Hultqvist and co-workers work are considerable and were initially underestimated. The main challenge was to obtain satisfactory tightness of all connectors involved in the experimental set-up. The problems with leakage resulted in that the research program originally planned for in this project had to be reduced...

  Innehållstyp: Publikationer

• 2009:33 Workshop on spent fuel performance, radionuclide chemistry and geosphere transport parameters, Lidingö 2008: Overview and evaluation of recent SKB procedures

  The safety assessment for disposal of spent nuclear fuel canister in the Swedish bedrock should thoroughly address the time period after a containment failure. Such a failure could be expected as a result of corrosion damage or mechanical failure due to rock movement. This report mainly covers some issues connected to parameters used for radionuclide transport calculations in the areas of...

  Innehållstyp: Publikationer

• 2010:09 Copper Thermodynamics in the Repository Environment up to 130˚C

  The mechanisms of copper corrosion for a KBS-3 repository for spent nuclear fuel need to be known with a high level of confidence. This is because the overall rate of copper canister corrosion (accounting for corroding species concentrations, geochemical conditions and the mass transport through surrounding barriers) provides an essential performance indicator in safety assessment. A...

  Innehållstyp: Publikationer

• 2009:19 Review of SKB’s Quality Assurance Programme

  SKB is preparing a license application for the construction of a final repository for spent nuclear fuel in Sweden. This application will be supported by the safety assessment SR-Site for the post-closure phase. The assessment of long-term safety is based on a broad range of experimental results from laboratory scale, intermediate scale and up to full scale experiments. It is essential that...

  Innehållstyp: Publikationer

• 2010:05 Discrete-Feature Model Implementation of SDM-Site Forsmark

  SSM has been following the investigations of the two candidate sites for a repository for spent nuclear fuel that the Swedish Nuclear Fuel and Waste Management Company (SKB) have been undertaking. SKB has reported the results of the investigations as site descriptive models. These models will be used to underpin the safety analysis following the license application of the repository planned...

  Innehållstyp: Publikationer

• 2009:35 Evaluation of SKB/Posiva’s report on the horizontal alternative of the KBS-3 method

  The KBS-3 method, based on multiple barriers, is the proposed spent fuel disposal method both in Sweden and Finland. The method has two design alternatives: the vertical (KBS-3V) and the horizontal (KBS-3H). SKB and Posiva have conducted a joint research, development and demonstration (RD&D) programme in 2002-2007 with the overall aim of establishing whether the KBS-3H represents a...

  Innehållstyp: Publikationer