Din avgränsning ger 1334 träffar.
-
2007:12 Development of a constitutive model for the plastic deformation and creep of copper and its use in the estimate of the creep life of the copper canister
The copper-iron canister for disposal of nuclear waste in the Swedish Programme has a design life exceeding 100,000 years. Whilst the operating temperature and operating stress are modest, the very long design life does require that the likely creep performance of the canister should be investigated. Many studies have been carried out by SKB but these have all involved very short duration...
Innehållstyp: Publikationer -
2010:34 The understanding of the formation of valleys and its implication on site characterization: Moredalen and Pukedalen, south-eastern Sweden
This report concerns a study which was initially conducted for the Swedish Nuclear Power Inspectorate (SKI), which is now merged into the Swedish Radiation Safety Authority (SSM). The conclusions and viewpoints presented in the report are those of the authors and do not necessarily coincide with those of the SSM. In south-eastern Sweden, there are a number of over-deepened narrow valleys,...
Innehållstyp: Publikationer -
2007:08 DECOVALEX-THMC - Task B
This report summarizes the work contributed to Phase 2 of Task B of the international DECOVALEX-THMC project, which took place during the period of March 2004 to May 2006. The Phase 2 work incorporated the use of a wide range of numerical models to simulate the failure of a number of intact rock core samples, from the APSE tunnel at Äspö HRL, as tested in uniaxial compression and other...
Innehållstyp: Publikationer -
2007:11 Review of Quality Assurance in SKBs Repository Research Experiments
SKB is preparing a license application for the construction of a final repository for spent nuclear fuel in Sweden. This application will be supported by the safety assessment SR-Site for the post-closure phase. As a preparation for SR-Site SKB has recently produced the SRCan safety assessment, which is currently in review. The assessment of long-term safety is based on a broad range of...
Innehållstyp: Publikationer -
2009:32 On Younger Stakeholders and Decommissioning of Nuclear Facilities
An appropriate balance in this regard must be based on a proper understanding of the values and value functions of younger citizens. Such information must thus be an integral part of the knowledge base to be used when plans and processes are being developed for dismantling and decommissioning of nuclear power plants and other older nuclear facilities. In the present project, empirical data...
Innehållstyp: Publikationer -
2009:31 A Review of the Decommissioning Costs of the Ranstad Site
The main objective of this study has been to review the future cost to decommission and dismantling the industrial area at the site of the old uranium mine at Ranstad in Sweden. Analyses of some detailed comparative empirical information have been used in the context of preliminary “bench-marking” studies. The estimated costs for decommissioning of the old uranium mine in Ranstad have been...
Innehållstyp: Publikationer -
2005:09 Comment on the Long-Term Chemical and Mineralogical Stability of the Buffer
Randy Arthur, Mick Apted, Mike Stenhouse SKI English...
Innehållstyp: Publikationer -
2012:34 Technical Note, Review of FEP Handling in the SR-Site Safety Assessment: Initial Review Phase
On 16th March 2011 the Swedish Nuclear Fuel and Waste Management Company, SKB, submitted applications for licences to construct a spent nuclear fuel encapsulation facility in Oskarshamn and a repository for final disposal of the encapsulated fuel in Forsmark. SKB’s applications are currently being reviewed by the Swedish Radiation Safety Authority, SSM, and the Land and Environmental Court in...
Innehållstyp: Publikationer -
2012:15 Technical Note, A review of the mechanical integrity of the canister
An introductory review of SR-Site has been conducted with respect to the mechanical integrity of the canister. The review is focused on the copper canister and the nodular cast iron insert. Review results show that a number of loads and loading scenarios for the copper canister has not been analysed by SKB. The importance of sufficient creep ductility of the copper material and sufficient...
Innehållstyp: Publikationer -
2017:29 Evaluation of the simulation software CIVA for qualification purpose
Background Modeling is an important tool within NDT, partly to develop and optimize testing technologies, but also within the Qualification Body’s activities to assess technical verifications and perform parameter studies. SSM has supported university research in the area for many years and, among other things, in the development of a software for ultrasound modeling. In addition, the...
Innehållstyp: Publikationer