Din avgränsning ger 1339 träffar.
-
2016:08 SSM’s external experts’ reviews of SKB’s safety assessment SR-PSU – hydrogeological and chemical aspects
Initial review phase...
Innehållstyp: Publikationer -
2018:18 Procedure for Safety Assessment of Components with Defects
– Handbook Edition 5...
Innehållstyp: Publikationer -
2012:36 Technical Note, Documentation and Traceability of Data in SKB’s Safety Assessment SR-Site: Initial Review Phase
On 16th March 2011SKB applied for a licence to construct and operate a spent nuclear fuel encapsulation facility in Oskarshamn Municipality and a final repository for the encapsulated fuel at Forsmark in Östhammar Municipality. SKB’s SR-Site safety assessment for the spent fuel repository is currently being reviewed by the Swedish Radiation Safety Authority, SSM, and its external experts...
Innehållstyp: Publikationer -
2011:15 Beräkning av merkostnader 2011 för rivning av de svenska kärnkraftverken och omhändertagande av restprodukter
Denna rapport beskriver SSM:s beräkningar av framtida merkostnader inför avgiftsförslaget för 2012-2014. Beräkningen görs i enlighet med finansieringslagen och avser samtliga merkostnader fram till dess att restprodukterna från de svenska kärnkraftverken är slutligt förvarade. Enligt nuvarande beräkningar antas detta ske 2069. Uppskattningen...
Innehållstyp: Publikationer -
2012:34 Technical Note, Review of FEP Handling in the SR-Site Safety Assessment: Initial Review Phase
On 16th March 2011 the Swedish Nuclear Fuel and Waste Management Company, SKB, submitted applications for licences to construct a spent nuclear fuel encapsulation facility in Oskarshamn and a repository for final disposal of the encapsulated fuel in Forsmark. SKB’s applications are currently being reviewed by the Swedish Radiation Safety Authority, SSM, and the Land and Environmental Court in...
Innehållstyp: Publikationer -
2011:12 Analysis of Barrier Performance: Modelling of Copper corrosion scenarios with and without buffer erosion
The purpose of this project was to develop a numerical modelling capacity to address the corrosion of the copper canister under gradually changing transport conditions caused by buffer erosion and removal of buffer mass. Due to the complexity of this task, such a model cannot be realistic in all respects, but the present effort should address the feasibility of solving numerical and...
Innehållstyp: Publikationer -
2012:37 Technical Note, Selective review of the hydrogeological aspects of SR-Site
This review of the hydrogeology is selective. It focuses on the measurement, interpretation and modelling of the potential repository host rock, that is the rock domain FFM01<-400m. It accepts as reasonably accurate the measurement and representation of the more transmissive parts of the hydrogeological system, particularly the near-surface 150m in the form presented by SKB. SKB have decided...
Innehållstyp: Publikationer -
2011:11 Handling Interfaces and Time-varying Properties in Radionuclide Transport Models
Quintessa’s QPAC code has been used to investigate the Qeq approach. The conclusions from this simulation study are the following. The basic approach to calculating Qeq values is sound, however, narrow channels could lead to the same release as larger fractures with the same pore velocity, so a channel enhancement factor of √10 should be considered. A spalling zone that increases the area of...
Innehållstyp: Publikationer -
2011:32 The Euratom Treaty v. Treaties of the European Union: limits of competence and interaction
Generally regulation under the Euratom Treaty could be divided into two main groups: areas explicitly regulated by the Euratom Treaty (promotion of research and dissemination of knowledge; health and safety; encouragement of investment; supplies; safeguards; the nuclear common market) and areas which are in the competence of the Euratom Community, but are not laid out in the Euratom Treaty (...
Innehållstyp: Publikationer -
2012:15 Technical Note, A review of the mechanical integrity of the canister
An introductory review of SR-Site has been conducted with respect to the mechanical integrity of the canister. The review is focused on the copper canister and the nodular cast iron insert. Review results show that a number of loads and loading scenarios for the copper canister has not been analysed by SKB. The importance of sufficient creep ductility of the copper material and sufficient...
Innehållstyp: Publikationer